Reviews
To CB223S produced in Kumamoto factory.
Because it is a part for Tank of MONKEY.
It is curved to fit the Tank shape.
When applying to a flat surface, the center of the double-sided tape should be
It doesn't make contact, so you need to devise a way to increase the adhesive strength.
I filled the Center section with Silicone sealant and
I reinforced it.
Cheap Other Brand Product (fake?) The expression of Kumamon is different from
When Webike's OEM Parts are on Sale, it's time to buy!
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
That's awesome that you can't buy the exterior, but you ship it!
It's Psycho. View detail
สวยงาม ถูกต้องครับ View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Horn relocation is a pain in the ass!
It is not the fault of the Takekawa, but the problem is that the internal space of the headlight of the MONKEY125 is too tight, and it is necessary to remove the headlight in order to relocate the Horn, but since the Tachometer was installed, the inside of the headlight is full of wiring, and it is difficult to manage. It's so annoying to remove the light again! By the way, Tachometer is also Takegawa! LOL!
I think it's better to extend the bracket and make a new one for ABS and JB03. If you release the bracket earlier, you won't need the bracket for the Horn.
View detail
You should never buy that!
It's the same bracket as the Cafe, so if you put it on a non-Cafe model, it's too low and awkward, totally different from the Catalogue image!
The letters don't go in easily, or they are so loose that they seem to come off, or worse.
I want my Gold back. You should never buy it!
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Easy installation, only takes 10 minutes!
This is a car without ABS.
I had a KITACO Down fender on it from the beginning.
This Kit does not require Horn to be moved.
Simply attach the Emblem to the Bracket and bolt the Bracket to the vehicle.
I think anyone can do it.
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX
Kawasaki ForkEmblem
I installed it on my ELIMINATOR 250se.
Because I miss it when I remove Bikini cowl.
It is only cut out and fit like the plastic model, but there is a case that it is difficult to enter.
Mounting Hardware was not purchased.
Quantity mounting without much difficulty:Set complete!
I'm very happy with it.
View detail
Fits: HONDA Gold Wing Tour DCT Airbag, HONDA Gold Wing Tour DCT, HONDA Gold Wing, HONDA Gold Wing DCT, HONDA Gold Wing Tour
GOLDWING
I put it on my 2020 GOLD WING.
Installation is easy because of the frame.
I'm just wondering what happened to Red's Line.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Expectations for improvement
I have been using KITACO's Emblem Bracket and Horn slide stay for a while, but when I changed to Down fender, I was worried about Horn under Stem. I bought this product because I was in love with the combination of the horn on the front and the emblem on the front...but there is a problem with the bracket of the horn.
The supplied Horn Bracket is shorter than OEM, or maybe because of its rounded shape, it doesn't catch on the turning stopper and the Horn comes down by its own weight. Therefore, it comes in contact with Emblem Bracket. It is a pity because I like the shape, but I cannot use it with this.
I decided to use only TakegawaEmblem, but it can be bought separately at a reasonable price, and I was able to put it on KITACO's Emblem Bracket without any interference with light etc.
View detail
Bore up? (LAUGHS)
I changed the Side cover so I changed the Emblem along with it! View detail
Quantity:It is not a Set.
Quantity:I think this price is too high for one piece instead of Set. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
With Bracket, it can be attached without relocating Horn.
Other companies' Emblem Bracket can be used for Horn relocation and
It was difficult for a novice to use it.
But this Kit was easy to put on by myself.
I worked on it at the same time as installing the down fender.
It was much easier to work with.
HondaOEMEmblem has been installed.
View detail
Red Emblem
Fits on even the slightest curved surface, and the adhesive is strong enough not to peel off, making it stand out against the black body. View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr X, KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4)
Z900rs Fork Emblem
I am quite satisfied with this product after installation.
It has a classic look to it and is reasonably priced.
It will be a custom with high satisfaction.
I purchased it in chrome, and English characters must be inserted separately.
However, the disadvantage is that the fixing bracket is not included, so it is difficult to install.
And the English characters don't fit well
It takes a lot of force. ------------------------------------------------------------ -------- I am very satisfied with this product after installation.
It looks classic and it will be a custom with high satisfaction
for the price.
I bought it in chrome, and English letters have to be inserted separately.
But the disadvantage is that the fixing bracket is not included, so it is difficult to install.
And English characters are not well inserted
You have to put a lot of effort.
View detail
Very easy to install! pmc emblem!
The bike in pristine condition has a blank appearance without the front emblem. If you want to hide the ugly soul and want a unique look, we recommend that you install it. It is also a level of difficulty that can be easily installed at home. I also like the material. I recommend! ------------------------------------------------------------ -------- The bikes in the genuine state are struggling without the front emblem. I want to go to a unknown soul and recommend a unique appearance. Mounting is a difficulty to make it easier to do at home. I also like the material. Recommended! View detail
The product is genuine, very beautiful and fast delivery. View detail
Front face has been changed completely.
Easy to install on vehicles with ABS without modification. View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
Looks great.
In terms of texture, it is Plastic, and a little cheapness is seen, but I think that the appearance of such a thing is a Large thing, and it is
I'm very happy with it. The letters are fitted one by one, but they look more three-dimensional than those of different manufacturers, which is good. Easy to install and beginner
View detail
Fits: Others V46, Others V35, その他 V35, その他 V46
The impression was Up.
This is the only one that gives me a high quality feeling. However, it took a long time to remove the old label. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
To Custom base
Just a few years ago, Zed OEM parts were available at a reasonable price, but with the recent rise in vehicle prices, parts have become more expensive.
I used to be able to use OEMParts as Custom base, but now I can't.
I bought this to Custom Emblem.
The impression changes only by making the White character of KAWASAKI a Black character.
Quality is not a problem.
View detail