Reviews
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, HONDA DAX125, KAWASAKI NINJA1000SX, HONDA JAZZ
Since there was a pain of a pure oil filler cap, and it was at this time, it exchanged for the thing made from a kijima. The packing of oil leakage prevention is attached. Since it becomes a one point accent also for appearance, it is pleasing.
Since there was a pain of a pure oil filler cap, and it was at this time, it exchanged for the thing made from a kijima.
The packing of oil leakage prevention is attached.
Since it becomes a one point accent also for appearance, it is pleasing.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BENRY CD50, HONDA monkey, HONDA Super Cub 50, HONDA dachshund, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT
a cam is use about KITAKO -- since it turns to high rotation by a high compression piston although it is naturally the outside for manufacturer security, I use it in test
a cam is use about KITAKO -- since it turns to high rotation by a high compression piston although it is naturally the outside for manufacturer security, I use it in test View detail
Fits: HONDA CRF50F, HONDA XR50R (for competition), HONDA solo, HONDA JAZZ, HONDA MONKEY, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY BAJA, HONDA MONKEY, HONDA SUPER CUB 50, HONDA MONKEY, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA DAX
The little cab was equipped. Attachment time is about about 2~4 hours, where a tool is assembled. Although the explanatory is attached, since an illustration is incomprehensible and too many difficult, you should make the diary etc. of Ho by whom
The little cab was equipped.
Attachment time is about about 2~4 hours, where a tool is assembled.
Although the explanatory is attached, since an illustration is incomprehensible and too many difficult, you should make the diary etc. of Ho by whom bore up was done rather than reading this to reference.
So difficultly, if the attachment itself has a certain amount of preliminary knowledge, it is satisfactory.
Is torque exhausted for it having increased after attachment, as for the impression which finished the shake down and ran?
If it is going to raise the maximum high speed, I will think whether another components are needed again.
This kit, since it is an area with many slopes, in 50-cc Power, it is inconvenient.
We can recommend you the direction of however, not worrying the maximum high speed.
However, probably, it is good in making a front into 15 dishes with a pure sprocket, since the burden on an engine is heavy.
Since the drive sprocket by a kitaco company can be purchased for about 1300 yen, I think whether it is good to purchase collectively.
View detail
Fits: HONDA XR100MOTARD, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50
It exchanged simultaneously at the time of bore up kit attachment corresponding to the company's normal head. Only the high cam exchanged valve springs this time, without exchanging. because of a bore up kit and simultaneous exchange, since the ma
It exchanged simultaneously at the time of bore up kit attachment corresponding to the company's normal head.
Only the high cam exchanged valve springs this time, without exchanging.
because of a bore up kit and simultaneous exchange, since the manufacturer also recommended the effect although it was not found, it was good -- it suits and is touch.
View detail
Fits: KAWASAKI GPX400R, KAWASAKI KZ750H LTD 750 - All, HONDA CB500F, KAWASAKI ZN1100B LTD 1100 - All, KAWASAKI ZN1100B LTD 1100 - All, KAWASAKI Z650SR 650 - All, KAWASAKI Z650SR 650 - All, KAWASAKI Z650SR 650 - All, KAWASAKI Z550F 550 - All, KAWASAKI Z550F 550 - All, KAWASAKI Z550F 550 - All, KAWASAKI Z550F 550 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 440 - All, KAWASAKI Z440 440 - All
Since it is handy also in price, it is used. It is the kana whose way which buys cheap one briskly crawls and is in an engine and which a result understands after exchange next time since it has just kana ~ Changed.
Since it is handy also in price, it is used.
It is the kana whose way which buys cheap one briskly crawls and is in an engine and which a result understands after exchange next time since it has just kana ~ Changed.
View detail
Fits: HONDA CB400 SUPERHAWKIII, HONDA HORNET, HONDA CB400TII, HONDA VT250 SPADA, HONDA XELVIS, HONDA JADES, HONDA JADE, HONDA VTR-F, HONDA VTR, HONDA VT250Z, HONDA VT250F, HONDA VT250 INTEGRA, HONDA VTZ250, HONDA VTZ250, HONDA VT250F, HONDA VT250F, HONDA V-TWINMAGNAS, HONDA V-TWINMAGNA, HONDA SUPER HAWKIII, HONDA GL500YAMAHA Super JOGZr Wing Black Custom
Although it is an oil filter made from a daytona, cost performance is better than anything. Although it has ridden on VTR250, since 1000 yen or more are carried out if it is a pure oil filter, in the oil filter which are the components exchanged frequ
Although it is an oil filter made from a daytona, cost performance is better than anything.
Although it has ridden on VTR250, since 1000 yen or more are carried out if it is a pure oil filter, in the oil filter which are the components exchanged frequently, this price is kind ^^ Also with a using feeling, when it exchanges, I feel again that the pure twist has also taken the metal powder well.
Since it is not necessarily inferior pure at least, using feeling easy enough is possible.
Did that an O ring is also attachment increase the number of stellar further?
It is one article called a daytona truly.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
It purchased with having been anxious about the oil temperature to serve both as a dress-up up. Since it can check becoming a rule of thumb of the warmth of a winter season, and that an oil temperature goes up by traffic congestion of summer, etc. too
It purchased with having been anxious about the oil temperature to serve both as a dress-up up.
Since it can check becoming a rule of thumb of the warmth of a winter season, and that an oil temperature goes up by traffic congestion of summer, etc. too much, it is considerably found useful.
Although a little glass side may become cloudy, it is a grade which is not worried.
He bought it and feels that it was good actually.
He is smart to a pleasant top.
View detail
Fits: HONDA CL400, KAWASAKI Estrella., HONDA CL400, KAWASAKI Estrella.
It attached to SR400. Since it is small and lovely, it is pleasing. The logo of of a tp K&N is also a joke. The engine performance is touch called such rubbed wax. Although there is no impression, it does not have dissatisfaction, either.
It attached to SR400.
Since it is small and lovely, it is pleasing.
The logo of of a tp K&N is also a joke.
The engine performance is touch called such rubbed wax.
Although there is no impression, it does not have dissatisfaction, either.
View detail
Fits: HONDA CRF50F, HONDA XR50R (for competition), HONDA solo, HONDA JAZZ, HONDA MONKEY, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY BAJA, HONDA MONKEY, HONDA SUPER CUB 50, HONDA MONKEY, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA DAX
It attached to 94 models of the monkey 50 individually. Editing the engine of a motorcycle has attached a maintenance document called the key to the manufacturer with reference in one day, although it was the first. A result is large satisfaction
It attached to 94 models of the monkey 50 individually.
Editing the engine of a motorcycle has attached a maintenance document called the key to the manufacturer with reference in one day, although it was the first.
A result is large satisfaction although this purpose was to relieve cruising by 60 km/h, and unification to a right-turn lane.
When beginning to run first, the front floated and got impatient, but exchanged the sprocket for the maximum high-speed twist considerably, and the chain was packed as two pieces, and also it was normal, and has achieved the purpose.
It is a recommend.
View detail
Fits: HONDA XR50 MOTARD, HONDA NSF100, HONDA XR100MOTARD, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE 100
although the cam of the manufacturer who is different until now was used -- it is exchange to ST-1 -- although I am 80 cc, after I put this in, the maximum high speeds are 98 K of 10-K up. There is rather no elongation in high rotation by inside rotat
although the cam of the manufacturer who is different until now was used -- it is exchange to ST-1 -- although I am 80 cc, after I put this in, the maximum high speeds are 98 K of 10-K up.
There is rather no elongation in high rotation by inside rotation serious consideration.
Adjustment of it and tappet clearance is setting out in which Mr. Yoshimura is somewhat larger, and the tappet sound at the time of an idol is a little loud.
Since it is 50 cc/100cc / cam common [ both ], waiting does not obtain.
View detail
Fits: YAMAHA R100 ROADSTER, KAWASAKI VULCAN400, KAWASAKI VULCAN400, KAWASAKI ZRX400, KAWASAKI BALIUSII, KAWASAKI BALIUS, KAWASAKI ELIMINATOR 250V, KAWASAKI ZZR400, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR400, KAWASAKI ZX-4, KAWASAKI ZXR250R, KAWASAKI ZXR250, KAWASAKI W650, KAWASAKI ZRX400II, KAWASAKI XANTHUS, KAWASAKI ZXR400R, KAWASAKI VZ750TWIN, KAWASAKI Ninja ZX-9R
Filters were also simultaneously exchanged at the time of the oil change of a vario 2 00-year model!! Since work is only desorption, it is very easy. At the time of attachment, a filter wrench is needed. Please keep in mind that a rubber seal port
Filters were also simultaneously exchanged at the time of the oil change of a vario 2 00-year model!! Since work is only desorption, it is very easy.
At the time of attachment, a filter wrench is needed.
Please keep in mind that a rubber seal portion will be printed if the back binds tight too much!! In a filter, I think that it is a very ordinary thing.
Although it could be pure, it was easy for the direction of a daytona choosing, and since it had always [ sushi ] put on the store, it carried out here.
Used comment ..... It is ordinary ww consumable goods, and since impurities will accumulate in engine oil if it does not exchange, it is one exchange recommendation at two oil changes.
View detail
Fits: HONDA CB400 SUPERHAWKIII, HONDA HORNET, HONDA CB400TII, HONDA VT250 SPADA, HONDA XELVIS, HONDA JADES, HONDA JADE, HONDA VTR-F, HONDA VTR, HONDA VT250Z, HONDA VT250F, HONDA VT250 INTEGRA, HONDA VTZ250, HONDA VTZ250, HONDA VT250F, HONDA VT250F, HONDA V-TWINMAGNAS, HONDA V-TWINMAGNA, HONDA SUPER HAWKIII, HONDA GL500YAMAHA Super JOGZr Wing Black Custom
Although the oil was changed by Schopp until now, it purchased in order to exchange by itself. Since it is attached, the O ring for exchange is saved.
Although the oil was changed by Schopp until now, it purchased in order to exchange by itself.
Since it is attached, the O ring for exchange is saved.
View detail
The impression of the car body seen from left-hand side comparatively [ cheap ] is change satisfaction very much. Since exchange is only a screw thread, it finishes with 1 minute (smile).
The impression of the car body seen from left-hand side comparatively [ cheap ] is change satisfaction very much.
Since exchange is only a screw thread, it finishes with 1 minute (smile).
View detail
Fits: HONDA CB400 SUPERHAWKIII, HONDA HORNET, HONDA CB400TII, HONDA VT250 SPADA, HONDA XELVIS, HONDA JADES, HONDA JADE, HONDA VTR-F, HONDA VTR, HONDA VT250Z, HONDA VT250F, HONDA VT250 INTEGRA, HONDA VTZ250, HONDA VTZ250, HONDA VT250F, HONDA VT250F, HONDA V-TWINMAGNAS, HONDA V-TWINMAGNA, HONDA SUPER HAWKIII, HONDA GL500YAMAHA Super JOGZr Wing Black Custom
It used for exchange of VTR250. It is cheap, and it is attached and the ring for exchange can also use a price in comfort.
It used for exchange of VTR250.
It is cheap, and it is attached and the ring for exchange can also use a price in comfort.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SRX400, YAMAHA SRX600
It has been used for a long time for years and old touch was good. I think that it is the highest to carry out custom in the style of a vintage.
It has been used for a long time for years and old touch was good.
I think that it is the highest to carry out custom in the style of a vintage.
View detail
being visible to a classical, although it is a place which hides in a tank and is not easily visible -- very much -- good -- I consider. Texture was very good.
being visible to a classical, although it is a place which hides in a tank and is not easily visible -- very much -- good -- I consider.
Texture was very good.
View detail
Fits: SUZUKI B-KING, SUZUKI GS1200SS, SUZUKI GSF1200, SUZUKI GSF1200S, SUZUKI GSR400, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX1400, SUZUKI GSX400S Katana, SUZUKI SV1000, SUZUKI SV1000S, SUZUKI BURGMAN200, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT1250F, SUZUKI BANDIT1250S
It is completely good although it is goods in the self-satisfied world. Since it thinks that a motorcycle is such a thing, the intensity of a small prejudice or an individual overlaps, and it becomes the person's motorcycle, such small parts are also
It is completely good although it is goods in the self-satisfied world.
Since it thinks that a motorcycle is such a thing, the intensity of a small prejudice or an individual overlaps, and it becomes the person's motorcycle, such small parts are also satisfied with themselves.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
It exchanged, at the same time as JUN carried out bore up. Like [ since it has just still begun to use, there is no telling whether it is effective, but / having purchased the expensive bore up kit ] the charge of safe. It is unexchangeable, unles
It exchanged, at the same time as JUN carried out bore up.
Like [ since it has just still begun to use, there is no telling whether it is effective, but / having purchased the expensive bore up kit ] the charge of safe.
It is unexchangeable, unless it removes a flywheel and removes a generator coil, when exchanging.
Merit that's right when removing the flat head bolt of + of generator coil fixation, direction it removed from impact.
A slight lack and a cone.
If acquisition is possible, I consider that it is better to exchange for a Torx screw etc. from + screw thread.
View detail
It was used for 94 models of SR400. Since the pure piston was almost coming at exchange time, he thought that he would carry out bore up drastically, and it exchanged by Schopp, but the piston has broken at about 4000 km after exchange. The cause
It was used for 94 models of SR400.
Since the pure piston was almost coming at exchange time, he thought that he would carry out bore up drastically, and it exchanged by Schopp, but the piston has broken at about 4000 km after exchange.
The cause was because not having equipped with the external muffler and the oil cooler and a carburetor rearranged normal.
After bore up became that it is easy to ride since torque up was carried out substantially and the maximum high speed was also raised.
It is better to be purchased by Kami who considered it, since an external muffler, an oil cooler, and big carburetor Lother are required when carrying out bore up.
since the attachment by Schopp was incidentally 23000 yen only at wages -- by reference -- pleasing .
View detail
Fits: DUCATI 1098R, DUCATI 1098S, DUCATI 1198, DUCATI 1198S, DUCATI 1098, DUCATI 999, DUCATI 998, DUCATI 996, DUCATI 848, DUCATI 749, DUCATI 916, DUCATI 748, DUCATI MONSTER Series, DUCATI 1098R, DUCATI 1098S, DUCATI 1198, DUCATI 1198S, DUCATI 1098, DUCATI 999, DUCATI 998
It exchanged for the clutch cover of 1098S. The point that other screw threads do not pass if the screw-thread location is shifted delicately (really delicately) and that it was worrisome lets one screw thread pass. It was able to let through and
It exchanged for the clutch cover of 1098S.
The point that other screw threads do not pass if the screw-thread location is shifted delicately (really delicately) and that it was worrisome lets one screw thread pass.
It was able to let through and other screw threads forcibly pass for the screw thread of middle first.
Probably, it is good to make a rubber washer blow, since there will be disagreeable sound of PAKITSU if torque is applied too much also when bolting a screw thread.
There is original good sound in a dry clutch after attachment, and since a design is also safe, it is a recommend for many people.
View detail