Reviews
It did not last a year.
It lasted only a little over a year.
The Large body seems to break after the manufacturer's warranty expires.
The Cover disintegrated while running, probably because it could not withstand the vibration of the single cylinder.
Before that, the Tube Fuse had rusted, causing poor contact and loss of power.
When I disassembled it and looked inside, I found it was rusted, so I think the waterproof property of the original Cover has never been Large.
The current flow itself is still present, so I crimped it with Shrink Tape and wrapped it around with Insulating Tape.
I think it is probably more waterproof than the original.
I do not have a Repeat. If I do buy one, it will be the 2-port one that attaches next to the company's Switch Box.
View detail
Fits: Others
This is number one!
Unobtrusive Refreshing, fast charging and immediate 100%.
Good product
View detail
For fixing USB power supply cord
I used to disconnect the cord when not charging my phone, but it became a hassle to put it on and take it off each time, so I installed it.
It's okay if you don't need it, but...
I would recommend it to anyone who is looking for a hassle-free experience (laughs).
View detail
It was the Best Fit.
Good product, but a bit expensive for a USB power unit. View detail
Fits: Others
Thin and space-saving
It is thin and good, but I am not sure about its waterproof property. View detail
To charge your phone
I use it because I use my phone Navigation a lot and it is essential to charge it.
I like it because it is Compact and discreet.
It does not charge quickly, but it charges well enough. I am using it without any problem for now.
View detail
It's been evolving!
The USB port I had installed 7 years ago was broken, so I bought a new one and found it to be much better. I bought a new one because the USB port I had installed 7 years ago broke, and it was much better than the old one. Please note that the fuse box may not be able to close depending on the car model. This USB port seems to have good durability, so it will last for a long time. View detail
Fits: Others
I put it on a 2018 R1200GS.
It was installed on a R1200GS TFTMeter MODEL.
It is usable without interfering anywhere in particular.
It is just plugged into Heller Socket, so it should be easy to use.
The Waterproof Cover was also included for convenience.
View detail
USB power supply, convenient.
I had this installed on my previous Motorcycle and bought the same product again. I think it is easy to use and the waterproof property is quite good. View detail
DAYTONA USBAdapter
[How is it used?
good
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
good
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Usb port
Found exactly what I needed for the bike and the price plus shipping was better than what I could have gotten locally, thanks for the fast shipping will be ordering again!! View detail
DAYTONA Motorcycle dedicated power key linked USB 2 port
It is easy to use and useful.
I am a little concerned about the waterproof property of the product, even though it is installed in a cowl where it is not exposed to rain.
View detail
For Grip heater
I added a simple OpMid ClipGrip heater, but the power from the KITACO USB Power Kit was not enough, so I added this. It was easy to work with because I had Daytona's Power Unit installed. View detail
Fits: Others
Easy installation
By simply inserting the Brake switch into the Brake switch, there is no need to search for a Cable that is energized when the key is turned on, and it is easy to install.
If you do not connect multiple power supplies for Grip heater and Navigationetc., a single outlet is sufficient.
View detail
With the conversion to D-Unit
USB and Cigar-Socket (for Inflator) were installed. Also purchased a D-Unit to keep Wiring organized!
The fixed Incilock design makes it universal and easy to use.
If you are concerned about it turning slightly, you can install it by sticking it on both sides.
View detail
Power supply USB 2 port for DAYTONA4.8AMotorcycle
The RelayBOX was cracked and the contents were completely exposed when I opened it to install the product. I thought that the returned parts were actually shipped. View detail
It is hard to see the energized indicator when outdoors.
I bought a new Cable because I changed the power supply to a USB-C one when I changed my phone model.
The connector on the LIGHTNING side is L-shaped, so I chose this one. The connector part is tough, and it looks sturdy to say the least, but you need to be careful about interference with the tank.
The connector on the LIGHTNING side has a white LED Lamp that glows when energized, but outdoors, it is almost impossible to tell whether the LED is lit or not.
I think it would have been better to remove the LEDs and make the Connector smaller.
View detail
ใช้งานดีมาส่งรวดเร็ว สินค้าคุณภาพดี View detail
It's surprisingly unobtrusive when attached to the body of the car.
I changed my phone model, and now that it supports PowerDelivery, I wondered if the USB power supply I currently have on my phone might not be able to charge enough for the amount of battery it consumes. We therefore replaced Motorcycle's USB power supply with one that also supports PowerDelivery.
I had been using DAYTONA's USB power supply in the past, and there was no particular trouble, so I used DAYTONA's.
There was also another one that was compatible with PowerDelivery, which seemed to be more discreet and could be refringed, but it had a separate rubber cap for the terminal, so I chose this one with the cap integrated into the body because I was afraid I might lose it in some accident.
The Z900 has an Attachment Power Supply Connector near the Meter for attaching an OEMOption DCPower Supply Socket, so it can be connected without interrupting the Brake switch.
Installation is easy as long as the Screen and ETCAntennas are removed from the Bracket and moved out of the way, leaving the Wiring in place.
The USB power supply transformer is also rather small and can be easily hidden in the space behind the headlight.
I attached the body to the side of the Mirror Holder on the Left side, but I thought it might float a little when I looked at it with the Single Body. I thought it might float a little when I saw it on the Single Body, but when I installed it, it was not as noticeable as I thought it would be.
View detail
Fits: HONDA CT125CT110 HUNTER CUB
USB power supply
I was worried about the OEM Cigar Socket, but decided to go with this product which has a USB Socket in one piece.
Installation was easy and took about 15 minutes.
We have yet to run in the rain, so we are looking forward to the waterproof performance.
View detail