Reviews
Axle Slider
Low price, easy installation, and Gold is not available from any other manufacturer. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Matching
The color really matches the bike perfectly. Anyone can install it. It's not difficult. The quality is good and the weight is good.
I also want to mount it on the rear wheels of my vehicle, but I can't purchase it because it's not for sale.
Thank you for the fast delivery. I will come back to purchase again. -------------------------------------------------- -------- The bike is really perfect ~ Anyone can do it. Not difficult. The quality is good and the weight is good. I want to install the rear wheel of my car, but I can't buy it because there is no sale. Thank you for your fast delivery and come to buy a visit again. Powered by Google Translator
View detail
Fits: KAWASAKI ZRX, YAMAHA FZ1, YAMAHA MT-01, YAMAHA YZF-R1, SUZUKI GSX-R1000, KAWASAKI ZRX1200, SUZUKI SV1000, KAWASAKI ZRX1100, APRILIA RS250 (Aprilia), KAWASAKI ZX-12R, KAWASAKI ZRX1200, SUZUKI SV1000, KAWASAKI ZRX1100, APRILIA RS250 (Aprilia), KAWASAKI ZX-12R
Axle Slider
These are custom parts that only look good.
We have the same Babyface as Frame Slider.
View detail
Fits: BMW S1000RR, BMW S1000R, BMW S1000R
Inexpensive among Front Axle Sliders
[How is it used?
Used as Slider in Front section
Was the one you received as per Image?
It is the same as the photo shown in the publication.
Was the installation difficult?
The installation itself is simple, but the Quantity:Pair (for Left and Right) Which of the following is to be installed as Main?
Check the installation. Check the Instruction Manual for handling.
The part that passes through the Axle Shaft is fully threaded,
It has a rubber tube to prevent scratches, but it is obviously long.
Since it was not possible to install it, the tube was cut and shortened a little for use.
How was your experience with it?
Hopefully not used, as it is effective in the event of a fall.
BABYFACE's Axle Protector was selected because of its proven track record and favorable reputation.
Since the fit is not that great, it is good to be able to wear it in a natural way.
The surfaces are just right.
[Included Parts:were they on?
Handling Instruction Manual available.
[Was there anything that disappointed you?
The resin part is grooved, but it is not chamfered, so if you easily grip it and tighten it,
Easily cuts hands. I think it should be chamfered originally because it is very sharp.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I would like the resin part to be chamfered.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
Rear one place was loose.
Rear parts were loose. The rear parts were loose, so they were adjusted by Seam. View detail
Texture is not good for the price.
I bought this product because it is a pooch, but the ATEC
We were out of stock and had no choice but to go with this product.
The installation is Exclusive Design but it does not look good.
View detail
I'm disappointed.
It was Pooch's Brand, and ATEC was sold out.
I had no choice but to choose Puch. The product was crappy for the price.
I am sorry to hear that.
View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA CBR1000RR
I installed Axle Protector for the first time.
Babyface, so it's perfect for Motorcycle as it is.
It was installed without any modification.
Instruction Manual with pictures would be nice.
I think it will sell more.
View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA300, KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR
Axle Shaft Replacement
OEMShaft was shaved off due to a fender bender and replaced.
The first difference with OEM is that it eliminates the need to use Split Pin.
This will lead to a MechanicalAdvantage when changing Tire later on.
Next, reduce Damage to Axle Shaft and Handlebar in the event of a fall.
Slider itself is an expensive consumable item, but it is a small expense considering the damage to the handlebar, footpeg, exhaust system, etc. when it falls over.
The 5mm hex Cap bolt allows for quick replacement.
Demerit is that there is no Instruction Manual for handling.
I am not sure about the Torque for tightening the Cap bolt and Axle Nut.
I had no choice but to tighten the nut side with the OEM specified torque and the cap bolt with 10Nm, but I am not sure if it is correct or not.
Next, Cap bolt must be visible.
There was a scattering of imprints that pointed out a few things, so it is possible that rust will occur over time.
If this is the case, please purchase a separate Cap cover.
When installing, be sure to apply grease to the shaft.
I applied Bell Hammer Grease No.0 to the wheel side and No.2 to the nut side to prevent rust, lubrication, scratches, and friction loss.
Unlike hollow shafts, the most outstanding feature of this product is that it can be easily installed and removed, but the lack of a handling instruction manual is the minus point.
The Ninja 250R and Ninja 250 are compatible with this model. (EX250L/M・EX250P) Therefore, it is recommended that you make sure that your motorcycle is compatible with the system.
View detail
Fits: DUCATI MONSTER 1200, DUCATI STREETFIGHTER 1098, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200 R, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 821
Simple
I installed Lightech front wheel axle slider on Ducati StreetFighter 1098 with aluminum adaptors include. The installation is simple, nylon slider body is a bit slim compared to another axle slider such as SW motech. View detail
Simple
Simple and Parenthesis good
Installation was also easy
View detail
Stable quality
The peace of mind of wearing it as insurance and I paid for it. View detail
Countermeasures against damage to Fork and Swing Arm in the event of a fall
Countermeasures against damage to Fork and Swing Arm in the event of a fall
It's expensive to scrape and break, and,
View detail
I don't want to confirm the effect, but
The workmanship precision of the product is quintessential.
I wish I could spend time as Dress-up parts without knowing the effect.
View detail
2016MODEL also ….
It is a 2016 MODEL and has the exact same problem as diceK's 2018MODELImpression.
The Left SideParts cannot be bolted on and require POM-C machining, so it is not recommended to purchase unless you can do it yourself.
View detail
It is easy to install.
I don't want it to function, but I am satisfied with the aesthetics. View detail
It is easy to install.
We are satisfied with the aesthetics of this component, although we do not want it to demonstrate functionality. View detail
I am satisfied
The installation was easy, even for a beginner like myself, because all I had to do was fix it in place with a screw. I was a little worried about whether it would fit on my s1000rr 2023 VERSION, but it did. I would have appreciated it if you had written "2019-2023" or "Hadrill" instead of "2019-" or "2019-2023" for the applicable range. View detail
Fits: DUCATI XDiavel, DUCATI PanigaleV2, DUCATI PanigaleV4R, DUCATI PanigaleV4, DUCATI 1299 Panigale, DUCATI 959 Panigale, DUCATI 1199 Panigale, DUCATI 899 Panigale, DUCATI StreetFighterV4, DUCATI StreetFighterV2, DUCATI Diavel1260, DUCATI Diavel V4, DUCATI Diavel
Highly accurate product.
I use Slider and others AELLA.
The high precision of the construction makes it safe to wear.
View detail
Incompatible with ’23RnineT
First, it does not fit the ’23 RnineT. The Axle seems to be shaped differently and the One Side boss does not fit inside the Bolt of the Axle.
So I cut off the boss and managed to use it.
Disappointing result for the time it took to deliver.
View detail