Reviews
I don't see the need for it on public roads.
I have not ridden on it yet since it was installed.
The reason for this is that once installed, OEMSeat is no longer available!
View detail
Under Cowl is a shame.
The upper cowl is squeezed inward near the radiator and interferes with the radiator cap, but the rest of the cowl fits without any problems.
Under Cowl has a bad hole at the bottom, and I am thinking of filling it with FRPRepair material to make it one piece and use it.
Upper Cowl and Under Cowl could be installed without any problem.
Material:I was prepared for the fact that there would be some hole matching and BALI removal etc. since it is an FRP product, but I am quite disappointed about the Under Cowl.
View detail
Saitaniya Tank Cover/Full Covered/Tank End Original Shape
MV AGUSTA F4RC RepartoCorse-MOTUL also
I've already purchased the same manufacturer, so it's not a problem;
SaitaniyaTank Pad for 2021 MODELKawasaki-Ninja ZX-10RR
I asked the store to install it for me.
Because it's a full cover? It cracked on the second day of purchase.
Especially every time the bite part rides and banks.
It's cracking and splintering. The bubbles are terrible.
[Angle] The white part of the picture is the crack that was repaired. The other side is also amazing!
I'm riding a restored Aron Alpha.
But it looks good, so let's call it good.
View detail
There are some cracks...
It took me about three weeks to receive this product. I was happy to receive it a little earlier than the expected delivery date. The packaging of the product was also very good. However, It is full of defects. The carbon panel has no problem, but there are some cracks in the clear layer. I finished installing this product but it's slightly tilted to the left. If I get a size 140 tire, I'm sure there will be interference. So I think I need to modify the L-shaped bracket on the right a little bit. I think it's a very disappointing product overall. View detail
The product was great, but the distribution sucked.
I bought this from WehBig for Circuit Running.
Although I often use Cowl of Mr. Saigaya, accuracy is also good for a low price, and I am saved. If I were to say anything, it would be that the angle of the LeftMiddle cowl's body mounting screw did not match at one point. The product's a good one, no problems at all!
The reason for ReviewTitle is that I was very disappointed with the accidental product.
Of the Full cowl set that I received, the Upper Cowl was cracked from the ear to the tip of the nose. I got the impression that it was compressed during packing or transportation, and the upper ear etc. broke through the ball. As for the exchange procedure, only the damaged parts were sent back to Kanto, and it took a long time to send a good product after checking the condition.
However, the replacement Upper I received was damaged again. This time I hit the tip of my nose and the Gel layer was blown off. There are also cracks in the White Gel, which you can't see in the picture.
I had to work around my free time to build the vehicle, so I put a lot of work into rearranging the schedule and packing it back up.
Webig's response was that he was sorry he didn't inspect the car when it came in, and that he would take care of it.
I didn't really plan to write this much, but when I saw the accidental product I returned being listed on Yahoo as an unattached product, I was indeed annoyed. At the very least, could you please consider the User's psychology and do it in a place where it can't be seen?
Don't get me wrong, Saigaya's Cowl is a good product. We'll be using it from now on!
View detail
Don't expect too much
It's terrible in places …
The accuracy is good, but the quality is low
The cost of a single body is not so bad, but it doesn't match the cost of painting and so on
View detail
Both ends float away
The Silhouette of the NINJA2 Helmet 50R's Tank when viewed from the side I didn't like it, so I bought a Tank Pad with a Type that extends the Tank end
I am satisfied with the Silhouette right next to it because it is right on target It's awkward because it floats more than 5mm at both ends
Double-sided tape is also pasted on the reverse side of both ends, so the top of the I tried to hold it down from and keep it from floating, but it flaked and floated over time
I reapplied it three times, fine-tuning its position, but it floated away after each one, so I gave up and floated away I used it as it was
It didn't come off and fly off during the ride, but I'm a little concerned
I don't know if I pulled the HaGap product by accident or if it was originally like this, but I'm not sure if it's because of the floating ends I replaced it with another company's Tank Pad because I couldn't help myself
View detail
It is unreliable
Purchase with Race use. The distance between the front and rear of the mounting Screw part is slightly different, and when it is attached, the Bottom case turns and the Axle Shaft does not enter. RubberRing comes as an installation Spacer, but it is meaningless if it is crushed with Rubber.
It is necessary to make Color according to Clearance.
It is not recommended for beginners.
View detail
Fits: DUCATI 1198, DUCATI 848, DUCATI DUCATI 1098
although the Carbon parts of the other company is also used -- 1 -- the No. color taste is light. Since whether it is pure lay keeps and it is visible, carrying out only (it will look cheap), it will be a Recommendation if it unifies by this ma
although the Carbon parts of the other company is also used -- 1 -- the No. color taste is light.
Since whether it is pure lay keeps and it is visible, carrying out only
(it will look cheap), it will be a Recommendation if it unifies by this maker.
View detail
"I purchased as the mudguard for rear suspension. The product made from Saitaniya which assumes the tire with a large size was chosen. About attachment: Processing is indispensable as a premise. If it attaches as it is, a rear brake hose and a fender will
"I purchased as the mudguard for rear suspension. The product made from Saitaniya which assumes the tire with a large size was chosen. About attachment: Processing is indispensable as a premise. If it attaches as it is, a rear brake hose and a fender will interfere. Since it does not help even if it changes management of a hose, the hole was made in the fender body like a picture. Moreover, although it is written in the instruction that the the genuine rear brake hose bracket is used, the fender body became obstructive and it was not able to attach a bracket. It corresponded by cutting off the angle of a fender. (Picture left) General comment: There is a sufficient effect about the mudguard which was the purpose. Moreover, there is an effect of a dress-up. Although I think that it is being able to say to Saitaniya products, processing accuracy is not so good. Although a rear fender, a tank pad, cowl, etc. were purchased, there was almost nothing which can be attached with unprocessed. In the case of purchase, it is better to think that it needs a processing." View detail
It purchased by parts required in order to equip with the cowl of a saitaniya. Since the hole for equipping with the warning of side stands, etc. is not opening the hole for a tachometer and speed meters although it is opened, it is necessary to make
It purchased by parts required in order to equip with the cowl of a saitaniya.
Since the hole for equipping with the warning of side stands, etc. is not opening the hole for a tachometer and speed meters although it is opened, it is necessary to make a hole by oneself.
Since it thought that it and a price were somewhat high, two stars were used.
View detail
It was used by TZR250. It did not become precocious although I regarded carrying out the lineup of the object for 3MA, etc. as very kind, and the accuracy as a cowl was by no means good. It did not leak, when it had shifted and fell, and the hole
It was used by TZR250.
It did not become precocious although I regarded carrying out the lineup of the object for 3MA, etc. as very kind, and the accuracy as a cowl was by no means good.
It did not leak, when it had shifted and fell, and the hole got bored, and the oil pump ground the mounting hole.
(I think that 60 K had not come out.) honest -- it is a cowl for what -- since !!! was thought, it is this evaluation.
Moreover, a weight compares that it is pure and is very light.
View detail
Even if the double-stick tape enclosed attaches with an umbrella umbrella, it will separate immediately. After all, about double-stick tape, purchase and surface finishing are bad, the angle was worn, and it was whitish in the home center.
Even if the double-stick tape enclosed attaches with an umbrella umbrella, it will separate immediately.
After all, about double-stick tape, purchase and surface finishing are bad, the angle was worn, and it was whitish in the home center.
View detail
Although it makes considering a price and the very thing is not bad, it is [ had / the bolt hole / too much / a defect ]. Since there were a fall etc. and notes, the new article was used and it attached, but since the mounting hole of processing and a
Although it makes considering a price and the very thing is not bad, it is [ had / the bolt hole / too much / a defect ].
Since there were a fall etc. and notes, the new article was used and it attached, but since the mounting hole of processing and an upper, and an under is also shifted in stay after all (it is not a milli unit) and that it is easy did not go, it is this evaluation.
View detail
It purchased in order to suppress mud splashes. Since the size of a fender was small, the expected effect was not acquired, but it is preeminent for the dress-up effect up. It unites with a front and there is please.
It purchased in order to suppress mud splashes.
Since the size of a fender was small, the expected effect was not acquired, but it is preeminent for the dress-up effect up.
It unites with a front and there is please.
View detail
delivered goods peel off an abrasion and paint application -- etc. -- it was, and it was dirty to the extent that it could not attach without paint application. Although it is rather good to carry out -- paint application to the panel which the black
delivered goods peel off an abrasion and paint application -- etc. -- it was, and it was dirty to the extent that it could not attach without paint application.
Although it is rather good to carry out -- paint application to the panel which the black gel was purchased since he did not want to paint, but is painted after all, to equip, and to see -- When attaching with a zoomer (ruckus), I think that the fixation by two cable ties is difficult.
View detail