Reviews
So stylish!
It was deteriorated by ultraviolet rays and other factors, so it was replaced.
The White Tank that originally came with it lasted over 10 years.
This is a purchase for a change of mood.
View detail
Custom Brake Circuit
It was decided to change the Back Mirror and shift the reserver tank, and to consider a custom aluminum reserver tank.
I couldn't find a good one, so I put on a small for clutch for the time being, and it was surprisingly clean.
The interference with the mirror was handled well, and although it is a Universal Product, it feels like a custom job.
You have to be careful with the amount of Brake fluid though.
View detail
I ended up replacing it with another product right away.
The design with Logo by brembo is not so bad, but the included bracket is too tacky.
I replaced it with a GALE SPEED bracket, but it was not compatible with the tank, so I ended up replacing the tank with a GALE SPEED one as well. The brembo tank kit was wasted........
View detail
Fits: HONDA General-purpose (Honda), KAWASAKI General-purpose (Kawasaki), SUZUKI General-purpose (Suzuki), YAMAHA General-purpose (Yamaha), HONDA General-purpose (Honda), KAWASAKI General-purpose (Kawasaki), SUZUKI General-purpose (Suzuki), YAMAHA General-purpose (Yamaha)
looks very solid, high quality
I'll install U-kanaya aluminum billet brake oil tank and Kohken mesh hose on Suzuki Haybusa 1300R, the billet oil tank looks very solid, high quality and no oil level check window. The aluminum straight brackets is a bit soft, easy to bend maybe I'll replace by stainless steel bracket View detail
Thanks again to Webike.
I ordered these for my GPZ1000RX project, they landed on my doorstep within a few days of placing the order. Great service and inc postage they were still cheaper than all the kits advertised in the UK. Will definitely be ordering more parts. Tell your friends about this site. View detail
Ideal for Dress-up
This is a change from the Normal tank (White color) of the same shape.
Of course, the functionality remains the same, but the appearance is much more impressive.
It feels more upscale.
color is [Color] Smoke but transparent Material, so it is easy to see the state of the liquid.
Reasonably dress-up around the Handlebar.
View detail
Fits: その他
I made a slight mistake.
Used for GSX1300R GSX1300R HAYABUSA Initial Model
Purchased to combine with GALE SPEEDVRC since the clutch master is being changed to GALE SPEEDVRC.
Nisshin's Reserver tanks are relatively inexpensive, compact, and very easy to use.
No wonder so many OEMs have adopted this product.
Especially when combined with the GALE SPEEDVRCMASTER, the VRC comes with a Nipple that is compatible with the thick hose of the Nisshin reservoir tank from the start, making it a good match in this aspect as well.
The position of the hose outlet and tank mounting bracket is not as flexible as in Gail's Reserve tank, but on the other hand, the construction is simpler and the tank is more compact overall.
By the way, there is a ”mistake” in the Title, but this is a personal mistake.
Hose straight Type by mistake. (Item No. 29732) but if you want to combine it with VRC, you can use the Type with the curved Hose. (Item No. 65994) I think it would be easier to Fit in the
↑ If so, Tank Bracket is Posh's Billet Master Tank Bracket (60mmor80mm) I think it would be a just fit if combined with
(Needless to say, Bracket bending is required.)
The quality of the attached hose is also perfect, as it has been used by many OEMs.
I have had problems with sweating in combination with YAMAHA OEM Fluid in other Hose cars, but since NisshinMASTER uses OEM Fluid from various companies, I think that at least the OEM Fluid from FOR JAPAN MODEL4Manufacturer will not cause problems such as sweating. However, NisshinMASTER is used by OEMs.
Also, I personally use BF4 a lot on my wakos, and even with this I have never had a problem with sweating.
I think it is one of the top class reliable hoses on the market.
At any rate, as a Reserve tank, it is a product that I would recommend to others with confidence because of its impeccable reliability.
View detail
Fits: その他
Reserver tank with low height
I used it to change my MT-09 to a YZF-R7 radial pump master cylinder, the hose diameter and length were just right and I was able to install the YZF-R7 radial pump master cylinder without any modification.
If a separate Master Cylinder is installed on a Naked type motorcycle, the vehicle height may change and the vehicle may not pass inspection.
View detail
OEM neatness
Installed on a GSX1300R 1999
Combined with GALE SPEEDVRCRadial master.
Tank is also available from GALE SPEED, but I personally found that one to be a little too "off" for my liking, so I switched to this one.
The reliability of the product is outstanding due to its numerous OEM adoptions.
Also, Hose/Clamp is also a Quantity:This price is for a set.
The good thing about this product is that there is little overhang on the side of the Tank, and the Tank Cover (Like Wrist band) It fits well when the
On the other hand, since the orientation of the hose is not so flexible, the tank bracket should be considered carefully.
Incidentally, when combining with GALE SPEEDVRC, set the MASTER to Tank BracketType and use Posh's Billet Master Tank Bracket (60mm) Just fit with the attached Hose if combined with
(Needless to say, bending of the Tank Bracket is required.)
The Gale MASTER is also compatible with Nisshin's thick-type Reserve tank hose, as it comes with a Nipple that is compatible with this type of hose.
I think that those who dare to replace it with an external MASTER are in the minority, but I think it is the Genin option because of its outstanding stability in terms of function.
I can definitely recommend this product.
View detail
Fits: その他
On the Brake Side
The MASTERReserver tank is a double disk car with a separate brake master, and converting the MASTERReserver tank from a regular LargeTank to a Small Type will result in insufficient capacity. I replaced the CylinderCap at the same time, and I am satisfied with the good feeling.
Incidentally, I used only the Clip because the attached Hose is too short.
View detail
Used on rear brake side. Satisfaction
It says "for Clutch" but it is used as a reservoir tank for Rear brake.
Nothing has changed in terms of functionality, but the better looking it is, the more motivated you will be when you go out for a ride.
The shape is different, so you can't just pop it on, but you can buy a bracket for a few hundred yen at Home center and you're good to go.
View detail
Just Parenthesis good.
I thought this would be the one to save Space as well.
Parenthesis is so good that you will feel like you are getting faster just by putting it on.
I'm having trouble with what to do with Bracket in TDM … other cars would be Large sturdy!
View detail
Genuine Brembo clutch Reservoir Kit (smoke)
I purchased this as I changed out a stock clutch master cylinder reservoir and wanted something a little newer. This was obviously an essential part. I decided on the smopke colour as it matched the bike better than the clear which was already on the bike. The price was awesome, much cheaper than I have seen elsewhere. The shipping was very reasonable and as this was an additional item with others it worked out very good indeed. When this was delivered to me which took around a week, as always, the packaging was excellent, again, as always. No damage to anything within this order, the outer box was sealed with tape and there was added padding inside so nothing could become damaged in transit. The workmanship of the parts in this kit were flawless. Everything fitted together without a hitch. All that is in the kit is everything you need for the upgrade. The bracket is of good quality aluminium and has a slight flexibility but not much. The bolts are nice and clean. There is even the link pipe which is a nice stiff feel but clearly braided inside. All the connectors are there too. I have to say, it looks the nuts and I am so happy with the overall result of the clutch master cylinder reservoir upgrade along with the kit here. Thanks again Webike, great service. View detail
[Color] Smoke is getting more and more custom.
What made you decide to buy?
The main thing is to give it a custom look, but when I replaced the brake hose with a rear brake hose, I also replaced the brake fluid.
[How was the installation?
Before replacing the brake line, drain the brake fluid from the oil tank, and then suction out all the remaining brake fluid from the caliper to drain the brake line. Brake fluid can damage painted surfaces, so be sure to protect the area around the brake line and work with caution. We recommend that you store water in the bucket and wash the fluid if it comes in contact with the fluid. We recommend that you keep this in mind.
The rest was done at the same time as the rear hose replacement, so it was not difficult. The air was then drained and the process was complete.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
How was your experience with it?
Same Size as OEM, just more custom feel and Tank. [Color] It has only changed to Smoke. The DAYTONA Master cylinder cap and tank caps from other manufacturers can also be used.
View detail
High quality product
Original brembo product with high quality, perfect fit to my motorcycle, beautiful product, also I received in good packing. Happy to purchase motorcycle accessories on webike . View detail
Genuine Brembo Smoke reservoir kit
This an upgrade I did a while ago but had not gotten around to doing a review on the Smoke reservoir kit. I have had a lot of experience with Bremo products and for this reason, I decided to purchase the Smok kit. It is a little easier on the eye and ou can see the fluid clearly as the view is not frosted. The price from Webike is exceptional, I had to wait a while before I could even order this kit as the Smoke was not in stock. Didn't take long for Webike to get the stock so I ordered whilst I could. The shipping method I used was EMS fast. They just do a great job in getting your order to you in record time, I believe this was a 4 day turnaround from Japan to the UK. You can't get much better than that. I ordered other parts with this and that also cut down on the shipping cost. Everything in my order was packed really well and although there was little space in the outer bax, Webike took the liberty to fill in any empty space with additional padding. This kit really is a goreous piece of work. The bracket is super clean, machined very well. There is literally everything you need to fit this kit to your bike as long as you have space to put one. I did have to get a new brake line made up but that was purely down to me not liking the bend on the line when this was fitted. It didn't really need changing but my OCD meant it just didn't suit me. This comes with all the clips, bolts, washers and the anti vibration rubber. It does look wicked once fitted. Works really well and teh brake feels a bit crisper although that might also have a lot to do with the fact I changed out the master cylinder at the same time. Anyway, I am very pleased with the result. Thank you Webike for the great effort you put into each order, keep it up View detail
Brembo 45ml reservoir pot
The brake side reservoir was also needed for a customer. The one they had fitted was a cheap after market reservoir. It might have looked good but it failed miserably and leaked a fair amount on the bike's fuel tank fairing. I already had this in my basket and matched it from Brembo website. These are perfect upgraces to the stock reservoirs on a lot of older bikes. The cost of the reservoir was very good, better than I could source locally in the UK. I already had other parts in my Webike basket and with about 8 other items of varying size I used EMS fast. The cost of this service was really good value. All arrived at my door in 4 days flat. The outer box was already sealed by Webike warehouse so nothing coud be lost from the box. All the items in the order arrived in perfect condition as expected. This reservoir is a really good looking part, even though it is white and pretty opaque, not totally clear but enough to see the fluid level inside. I have fitted these to a lot of older model bikes that were in desparate need of a new reservoir. Brembo manufacture these for a universal fitting and they really are. You may need to get a different banjo for the exising brake line as the outlet doesn't always match with your existing one.It is a nice touch having a screw on cap and then bolted down. The more security the better when it comes to brakes. Fitted to the existing braket the customer had so an easy installation. All filled, bled and done in less than an hour. ABS for you >.View detail
Brembo white 15ml reservoir pot
This is not for any of my bikes, it is for a customer who needed a new one. I already had a good knowledge of the correct parts needed for the job and found all I needed from Webike. The cost of the genuine Brembo reservoir is excellent. I don't even know if a cheap after market pot is any cheaper really. Other parts were also in this order and I could make the shipping a lot better by adding more than 1 or 2 parts to the order. EMS fast is what I used and I am totally happy with how quick they are. 4 days is all it took from Japan to the UK. I even ordered these parts on a Froday evening in the UK, shippedlate Sunday here in the UK and arrived Tuesday. All the parts in this order were very well packaged, additional filler was used to make sure no parts could ove and damage any others inside. The reservoir pot in a great piece of kit, you know you are getting quality from Brembo. It's what they do. The pipe ends were well finished, nice and smooth, no sharp bits at all. The cap was tough to get screwed on but you do not want a cap that comes off with vibration, don't ask me how I know this. That was not a very good day at all. Fitted to the clutch master cylinder really quickly. Customer is very pleased and so am I. Great work Webike. View detail
Genuine Brembo 15ml smoke reservoir pot
My rear reservoir tank looked a little old and I wanted to get a few of these for other bikes than I would normally buy for. I went for the smoke colour as this is the same colour as I already have on my from master cylinder. You have to match right. The price of these reservoirs is excellent, much cheaper than I could get from the UK. I ordered 4, I already had a few other Brembo reservoirs and the kits they have so the shipping was cut dramatically between all the parts. The method I used for this order was EMS fast. They really are fast too, from placing my order to the order being delivered directly to me was 4 days. This courier was also a lot cheaper than Fedex who I used to use. All the parts in the order were well packed, most came in their individual packets and teh box was filled out with bubble wrap and air pockets so nothing could move around too much. The reservoir upon receipt looks really cool. So much better than the plain old white version and actually clear to see the fluid within. Very nice. The screw cap was firm but not too much, you don't really want a loose cap or something bad will happen. I already had the hardware to fit this reservoir ready to go. All fitted in about 10 minutes and that was even clamping the brake line. I have to say, I am very happy that Webike are authorised Brembo distributors and this means I can source more of the Brembo parts I need from one place. Great work Webike, thanks a lot. View detail
OK as long as you don't crack it.
The Tank on the Front. [Color] The rear was replaced with Smoke, so the Rear was also added. The mounting holes are M6.
As long as the Hose is routed so that it is not subjected to strange Tension, the Bracket is simple and Large sturdy.
We had seen many cases of cracking with Reserver tanks from other companies, and we chose brembo because we didn't want to be a bit uncomfortable with it.
I hope the resin will not crack due to vibration, etc.
View detail