Reviews
OEM Compatible Filter
Air filters for mopeds, especially filters for slightly older 2-stroke models, are generally made of urethane foam.
This sponge filter deteriorates due to the gasoline component of the blowback, resulting in a terrible condition like that of the STELLA.
This time, I prepared it for the carburetorOH of JOG remote control, which had been neglected for a while.
I worked on it and found that it was still torn up in the air cleaner box, so I quickly replaced it.
Size was also generally usable without any problems.
The difference from OEM is that engine oil and filter oil must be applied since the oil is not soaked into the engine.
In my case, I put about 5cc of engine oil on FilterSponge, put it in a Vinyl bag, and spread it around as if holding it. I applied the oil by squeezing the Vinyl bag and spreading it around.
Too much will cause resistance, too little will reduce the ability to filter sand dust.....................
If you are concerned about it, place it on the ground between sheets of newspaper and step on it after applying it. The newspaper will absorb the excess oil and become a good ambai.
If Oil was applied in the right amount, it would be 5 stars.
View detail
Fits: HONDA APE 50, HONDA GROM, HONDA MONKEY125, HONDA CT125・CT110 HUNTER CUB
Cost-effective Pad
I bought it because it was cheap, and it is a very ordinary pad with performance comparable to OEM.
Life is still unknown.
View detail
Fold creases...
The shape is perfect for a dedicated product.
The needle insertion point was roomy and easy to work with, as if it were made a little larger than the OEM.
The crease is quite prominent.
The discoloration has not yet reached the point of discoloration, so I think it will become less noticeable if it is treated properly.
However, I think that this is unavoidable because of the low price.
I use a very cheap Chinese Air Tucker, much easier than Handy.
View detail
![Drive Chain 420HD (reinforced gold) [with Clip Joint].](https://img.webike-cdn.net/catalogue/images/100747/13686529_1_TS.jpg)
Fits: KAWASAKI KX65, HONDA NSF100, HONDA XR100MOTARD, YAMAHA DT50, YAMAHA RX50, YAMAHA RX80, KAWASAKI KX60, HONDA APE 50, HONDA APE 50TypeD, HONDA APE100, HONDA APE100TypeD, SUZUKI BIRDIE50, SUZUKI COLLEDA SCRAMBLER 50, SUZUKI COLLEDA SPORT 50, HONDA XLR80R, HONDA CB50JX, HONDA NSR80, HONDA SUPER CUB 50PRO, KAWASAKI Z125PRO, KAWASAKI KSRPRO
Strong and smooth
It is strong and smooth. Quiet and a good buy! 。 I want to buy the next one. View detail
Fits: KAWASAKI KX65, HONDA NSF100, HONDA XR100MOTARD, YAMAHA DT50, YAMAHA RX50, YAMAHA RX80, KAWASAKI KX60, HONDA APE 50, HONDA APE 50TypeD, HONDA APE100, HONDA APE100TypeD, SUZUKI BIRDIE50, SUZUKI COLLEDA SCRAMBLER 50, SUZUKI COLLEDA SPORT 50, HONDA XLR80R, HONDA CB50JX, HONDA NSR80, HONDA SUPER CUB 50PRO, KAWASAKI Z125PRO, KAWASAKI KSRPRO
For MONKEY125.
Now I am using Non-seal420NZGold made by Daido, this product is GoldSpec. and this Gold amount, from what I saw, the make is good, it is for spare when the Chain made by Daido is no good. View detail
Fits: HONDA SUPER CUB C90, HONDA SUPER CUB C70, HONDA SUPER CUB C50
usually
[How is it used?
To replace Throttle Cable
Was the one you received as per Image?
Yes
Was the installation difficult?
Cable crawling is troublesome.
How was your experience with it?
no problem
[Included Parts:were they on?
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Satisfied except for delivery time
I was worried about the Size of the O-ring that came with it, but it was fine.
I bought a DAYTONA Oil Filter before, but the adhesive was sticking out, so I tried a different Filter. It may take a long time for delivery, so if you are in a hurry, it is better to check first.
View detail
Fits: SUZUKI ADDRESS V100, SUZUKI Address V100, SUZUKI Address V100
Easy to use.
I purchased the Super Dio AF28 for the Super Dio AF28.
It stretches well and can be stretched neatly.
The quality is good enough.
However, unlike OEM, there are seams in each part, so this is a concern for water seepage.
Third-party products are probably all the same, so with that in mind, this is a good enough product.
Size feel is good.
The design, cutting, and sewing are both fit, sturdy, and good.
Since the product comes folded, the folds will be visible even if it is stretched at first.
However, it grew and disappeared over time.
Well and pulling and stretching seem to be important.
The cost performance is excellent because the price is reasonable and the quality is adequate.
I felt I could buy Repeat.
View detail
Enough for normal use.
I bought this when I bought my vehicle used and replaced the Pad.
It works just fine, it's not too bad to operate, and it has a Merit that's affordable.
good point
Good enough performance for city riding.
It's very cosy.
Easy to get a bite.
Fast delivery.
A bad point
It is not suitable for vehicles that have been powered up.
If the vehicle is powered up, it will deplete quickly.
It can be used without a problem if it is the degree which added a little hand to NORMAL, and it is the Parts which is never bad.
It works normally, and the controls are not bad.
If you have modified the intake and exhaust, and strengthened the suspension, the brake will be defeated, so you can not recommend to tune the car.
View detail
Fits: HONDA RUNAWAY, HONDA Live Dio Cesta, HONDA LIVE DIOSPECIAL Knife, HONDA LIVE DIOJ, HONDA LIVE DIO, HONDA PAX CLUB, HONDA TODAY, HONDA DIO FIT, HONDA DIO CHESTA, HONDA DIO, HONDA TACT BASIC, HONDA TACT STAND-UP, HONDA TACT, HONDA SMART DIO, HONDA ZOOMER, HONDA SUPER DIO, HONDA GIORNO CREA, HONDA Giorno, HONDA GIORCUB, HONDA JULIO
OEM Equivalent Product, Brand in Japan.
I replaced the front and rear brake shoes with new ones while I was replacing the tires on my moped.
I decided to go with PFP because I thought it would be better if I could get approximate performance for less than half the price of OEM Parts.
Although there are cheaper CHINA non brand at large mail order sites
As you might expect, I have some resistance to Brake Parts, so I chose from Japan's Brand.
I chose it because it came with a Spring, was carefully packaged in a paper Package, and I knew that Motorcycle shops use it for repairs.
The Package says NAO material (Non-asbestosOrganic). I don't think there is any Brake Shoe that uses Asbestos material nowadays, but this NAO is …
1.Compared to other materials, it is more resistant to wear and generates less friction powder.
2.Low aggression, reduced ringing
3.Quantity to weather:Pair (for Left and Right) The performance of the system is not limited by the
4.Spring is included and braking force is stable after shoe replacement.
5.It is also effective at low temperatures and has excellent initial braking power.
I see, it is Perfect ^^^.
Nowadays, OEM Parts are made in Asia. If the quality is the same, the cheaper the better.
When replacing, clean and grease up the brake camshaft, and maintain the cable.
No squeal and I am satisfied so far. I don't know how durable it is so I gave it 3 stars.
View detail
Fits: HONDA Dio50 ZX AF34, HONDA Dio50 ZX AF48, HONDA Dio50 ZX AF35
We've got compression back!
The compression on the LIVE DIO was dropping, so I replaced it.
After the replacement, I could see that the compression was increased even if I felt like kicking. The price is cheap and I recommend it, but I think it is better to build it after taking BALI.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX1100S, SUZUKI GSX-R750, KAWASAKI ZZ-R400, KAWASAKI ZZ-R1200, KAWASAKI ZZ-R1100, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR X, KAWASAKI Ninja ZX-9R, SUZUKI SV1000 SZ, SUZUKI SV1000, SUZUKI TL1000S(97-01), SUZUKI BANDIT1200 S, SUZUKI GSR400, SUZUKI BANDIT1200, SUZUKI BANDIT1250 ABS, SUZUKI GSR600(06), SUZUKI GSX-R400 R, SUZUKI GSX-R400, SUZUKI BANDIT1250 S ABS
It's cosy, but it squeaks.
I had been using SinteredPad and bought this product to replace it. I don't know if it is because I didn't chamfer the surface when I replaced it. Both Dry and Wet braking is as good as it can be, and considering the price, the cost is high. If you don't want absolute braking, it is necessary and sufficient for normal driving. View detail
Fits: HONDA LIVEDio|J|SR|ST|ZX AF34, HONDA LIVEDio|J|SR|ST|ZX AF35
For Refresh
Purchased a new Belt, Pulley and Weight Roller for the Live DIOZx Refresh.
In order to open Crankcase, because it had to remove the Air Cleaner BOX on the structure, I exchanged it in addition because it is the thing of several hundred yen.
I changed it and put it on because it's not particularly different, but it feels better with a new one.
View detail
Fits: SUZUKI TS50W (86), APRILIA 50R S, APRILIA TUONO 50, HONDA TLM50 (83-)
GORILLA at 110.
Cheap, I chose it just for that.
I'm not too particular about the color.
Durability remains to be seen, but I hope it doesn't stretch too fast.
But it's cheap, so you can just buy a new one.
View detail
Fits: HONDA Dio(AF18) Late, HONDA Dio(AF18) Late
OEM same etc.
I don't like the sound of the noisy Power Filter, so I bought an OEMAir cleaner box at Yahoo auctions, bought an Element here and returned to the OEM. View detail
Packing size didn't fit.
Rubber's PackingSize didn't fit, but the FilterBody fit properly.
Currently there are no problems.
You picked the wrong part number, so you were packing the wrong thing …
View detail
Think of it as a FilterSingle Body and you're OK.
Attached O-Ring is Quantity:2pc. Both sets were too thin to be useful.
I think it's because of the use of other models and insufficient conformity check.
The filter itself is fine.
View detail
Fits: YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ, YAMAHA JOG ZR, YAMAHA JOG 3YK, YAMAHA JOG 3YJ
It can be used normally.
Glue from the back of the Seat cover seam to protect the Seat Sponge from moisture. and installed on top of the Sponge covered with Polyethylene Seat. It was. You will need a strong Tucker to install it. It can be used normally. View detail
Fits: HONDA RUNAWAY, HONDA Live Dio Cesta, HONDA LIVE DIOSPECIAL Knife, HONDA LIVE DIOJ, HONDA LIVE DIO, HONDA PAX CLUB, HONDA TODAY, HONDA DIO FIT, HONDA DIO CHESTA, HONDA DIO, HONDA TACT BASIC, HONDA TACT STAND-UP, HONDA TACT, HONDA SMART DIO, HONDA ZOOMER, HONDA SUPER DIO, HONDA GIORNO CREA, HONDA Giorno, HONDA GIORCUB, HONDA JULIO
Satisfied
To replace the rear brake shoe 。
I was able to install without problems 。 Does it work as well as the OEM, etc., or a little better?
There is no squealing, and the costuming is very high
This time it was Rear, but I think I'll use this for Front as well
View detail
Fits: YAMAHA TT-R125 LW, YAMAHA YB-1 four, YAMAHA YB-1 four, YAMAHA YB50 four, YAMAHA GEAR BA50, YAMAHA GEAR, YAMAHA MATE V50 D, YAMAHA MATE V50 D, YAMAHA MATE V50 D, YAMAHA MATE V50, YAMAHA MATE V50, YAMAHA MATE V50, YAMAHA Newsmate V50N, YAMAHA Newsmate V50N, YAMAHA Newsmate V50N, YAMAHA Newsmate 90, YAMAHA Newsmate 90 T90N, YAMAHA newsgear, YAMAHA News Gear (4ST) BX50N, YAMAHA News Gear BA50N
Cospa strongest
I was worried about it being cheap, but it's nothing to worry about
It will stop
Brake noise sometimes occurs after rain
I don't know how long it will last, as I've just started using it
View detail