Reviews
Fixing stiffer than previous product
I had used the previous product, but this new product looks more luxurious, and the locking mechanism is quite good with easy detachment of the phone. It seems a little hard, but I think it will become less of a concern after a few more uses. View detail
Convenient to have!
I could not find a good place to mount it, so I bought a Mirror mount because it was EXACTLY what I wanted. As a result, it was Exactly!
I was able to install it without any problems, but I am only worried about theft.
The screws are dedicated to prevent theft, but if the Bracket is broken or the Mirror is removed, it is the end of the world.
I would rather be able to take it off and on easily, so I can carry it with me.
So, I am Covering as a self defense.
View detail
It's hard to tell the effect, but is there...?
[How is it used?
I bought this one because my iPhone Camera had broken in the past.
Was the one you received as per Image?
It looks exactly as it should and was easy to install with no problems.
How was your experience with it?
After actually using it, I honestly do not know if the vibration is reduced.
Since it is a 250cc single cylinder Motorcycle, there is a certain amount of vibration and the phone vibrates slightly.
However, I am satisfied with the use of the Camera on my phone without any breakage.
[Points to note]
After all, this Device pinching makes the phone seem to pop out more than expected.
The Mount is somewhat noticeable, but I can't go far without a map on my phone, so I guess it can't be helped.
View detail
It seems to be the best I have used so far.
Dedicated Smartphone Case and Quantity:It is expensive to buy as a set, but since it is directly attached to the case, it is compact and inconspicuous when removed, and when worn, it is less extravagant than other products, so it is good to wear on a full cowl motorcycle.
If there is a drawback, I have to buy a Smartphone Case when I buy a new smartphone, but I am worried about how long it will take to get a dedicated Case when I buy the latest model.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR400R (2013-), HONDA CBR600RR, HONDA CBR600RR, HONDA NSR250R, YAMAHA YZF-R25, HONDA CB300R, HONDA CBR500R, YAMAHA YZF-R3
SmallEngine Displacement VolumeParts that are helpful for cars!
[How is it used?
I bought it because there was no Space for Handlebar in the additional Meteretc. and it was difficult to install ActionCamera.
Was the one you received as per Image?
Although it is called "Small size", it looks like a large size for CD50.
Was the installation difficult?
Installation can be done with a single bolt.
I installed it on a MeterAdapter.
How was your experience with it?
I think it looks lumpy, but you can't beat the convenience.
The range during touring has been expanded.
[Included Parts:were they on?
Nothing else in particular.
[Was there anything that disappointed you?
Steel, so Wound will be noticeable.
It is inexpensive Parts, but it would have been nice if it had a more luxurious feel.
▼Various sizes are available in the Lineup, which is very nice because it can be used for different purposes.
View detail
This product is easy to use for various sizes.
This summer has been very hot and carrying a bottle of beverage was a must. I used to carry it in my bag or top case, but I could only drink it during breaks. I think the large size is good because I can easily drink when waiting for a traffic light by attaching this Bottle holder to the Handlebar Brace. The shape of the bottle has a suitable depth and the size can be adjusted. It can hold a thermal bottle, but if it becomes too heavy and affects huddle operation, I will attach it to the Engine Guard as well. The only drawback is that once the Holder is installed, the angle cannot be adjusted without disassembling the Holder. View detail
Beware if your phone is thick.
Purchased for DL1000 V-STROM250.
Similar products are available from other companies, but the original manufacturer of this shape is KaEdia, so there is a sense of security in the material and production.
Installation was easy and effortless with the included Hexagonal Wrench.
If you attach it to the bar mount of DAYTONA's Screen Offset Bracket, the screen angle of the Meter and smartphone will be aligned to reduce eye movement, and visibility when using the car navigation system will be considerably higher.
The phone thickness is 12mm including Case, so be careful if you are using a thicker phone.
SafetyBand is included and we recommend using it in conjunction with the SafetyBand.
My phone seems to be a bit thick, and although I can put it on, it does not hold completely. After it almost came off while driving, I always fasten the four corners with a band without any trouble.
The company's Shuriken Type, which has a similar mechanism, is said to be compatible with a thickness of 15mm, so it may be a good idea to consider that one.
View detail
Excellent "point to take with "Motorcycle
[How is it used?
...from approximately December 17, 2022 to September 21, 2023, inclusive.
Base is attached to the helmet using the included double-sided tape mount.
Was the one you received as per Image?
As shown in the image, as shown in the Image.
The previous generation:Bs-8a (https://www.webike.net/sd/23562886/) looks almost the same, for better or worse.
How was your experience with it?
The signal is almost always visible while it is on the screen with no problems at all, giving a sense of security. Also, the image quality is clear enough to be recognized.
The battery can also be recorded at all times while running from morning to night, except during breaks. However, if you run until nighttime, it is safer to charge the battery somewhere during breaks.
USB TypeCCable is used for charging, but it is not recognized if both ends are CCable, and USB-A is required for the One Side. In short, a cable that can charge B+COM SB6X is acceptable.
The Magnet base is a Strap that prevents falling off, but falling while driving has not occurred since the previous generation.
Because it is mounted on a helmet, it has the advantage of being able to take pictures in the direction it is facing, unlike vehicle-mounted systems.
To mount on Helmet, if the driving posture changes between motivated and unmotivated, the angle must be readjusted or only the sky will fit in the angle of view.
Because it is mounted on a helmet, the Image is easy to record against a four-wheeled vehicle that will bury the Motorcycle in a single blow.
The file is recorded on a microSDCard, but the internal file can be viewed on a Smartphone (Google Pixel 7 Pro) by using a type-CAdapter from USB-A while the SDCard is inserted in the body.
The sound and vibration notifies the user when the device is activated and when it is closed, so the user does not have to worry even if the Body is not visible from the mounting position.
I felt evolution from the previous generation because various settings can be made only with Body by long-press activation.
Mysterious blinking function added to Light, but not yet used.
Body weight is not light, but I don't think I feel a tilt in the center of gravity or directly related to fatigue when running around with it on Helmet.
[Points to note]
Although the body has evolved, with settings now possible only on the body and the charging terminal changed to type-C, the parts described in the previous generation's Impreza (https://imp.webike.net/article/414070/) remain unchanged.
The round part connecting the rubber cover on the back to the body is still too thin, and even though I had recognized it, I tore it off the first time. However, the rubber cover itself is too tight and does not come off unexpectedly.
The screws on the mounting base were re-tightened and hardened with Aron Alpha. The tightness of the screws determines the fixation of the body, so if the screws are tightened too much, it will be impossible to change the angle of the body.
How did it compare to other products?
Despite the weight of the Body, we felt that in many cases this product was superior in terms of continuous shooting time.
The image quality is beautiful, but if you want to keep a record of your touring and conversations at Income, I thought it would be easier to use SENA, which is integrated with CameraIncome.
In exchange for its weight, this product boasts a long recording time. Although we have not been able to evaluate the durability of the product, we believe that it is highly durable, as Base is used in Japan where the equipment is running around and waiting for prey without regard to the season or weather.
On the other hand, except for the Body, all the shortcomings of the previous generation have been carried over, including the giving up of the possibility of seeing no evolution except for the Body.
View detail
Fits: Others
It takes a long time to watch a video.
This is attached to VSTROM1050XT.
It is equipped in case of emergency.
I thought it would be a two birds with one stone to also check my daily Riding, but I think I will only check the video when I have an accident because it takes a long time to download to watch the video and it is a lot of hassle.
Installation is no problem at all if you have the general knowledge and ordinary skill to disassemble the exterior and have electrical tools.
View detail
Looks, good!
It looks, well, not so good!
However, when the Handlebar is brought to the locked state
I'm about to hit Tank...
The position of the attachment...but not so much, it doesn't bother me.
While driving, it is easy to see.
View detail
For Fat bar
[How is it used?
I purchased this product to install Gopuro on my Fat bar.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Just sandwich it between Screw and Nut, but in the case of Fat bar, since it is 28.6Size, sandwich the collar that comes with it.
Both Screw and Nut are small, so be careful not to lose them.
How was your experience with it?
It is just the right Size so it fits securely.
[Included Parts:were they on?
Size adjustment collar is attached.
[Was there anything that disappointed you?
I think it would be easier to use if it were more Compact, but it is good because it is durable.
View detail
It's easy to use, but it's a Large size.
[How is it used?
I purchased this to mount my Gopro.
Was the one you received as per Image?
It is standard, but quite longer than the Image.
And it is quite heavy.
Was the installation difficult?
It is easy to use because you just turn the handle to loosen it and insert the ball into the loosened part. However, when I loosened the Dial too much and it came off, parts were scattered.
Please be careful not to loosen it too much.
How was your experience with it?
It is long but easy to use because of its flexibility.
[Included Parts:were they on?
Instruction Manual。
[Was there anything that disappointed you?
I wish it was a little lighter and Compact. It's a bit tough on the half side, so which would you take?
View detail
Usability is good
[How is it used?
RamMount for GoproCamera shooting on Fat bar's Road motorcycle.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is attached in the same way as a normal go-promount, so it is simply attached with screws.
How was your experience with it?
With other GoproMounts, the height was not high enough for the handlebar, and it was hard to see the front of the camera.
The RamMount has a standard setting and was easy to install without having to think about how to install it.
[Included Parts:were they on?
As shown in the image.
[Was there anything that disappointed you?
Neck is a bit pricey, but it is easy to use.
View detail
Sufficient for solo touring
The functionality is sufficient as I only listen to the navigation guidance on my phone. 2 times used and so far no Trouble.
However, the charging cord is in the way.
View detail
I am satisfied with the cospa, but it is sometimes reluctant to move.
The included Mirror mount was too thick and could not be used due to insufficient Mirror threads.
I purchased it separately and was able to install it without any problems.
MotorcycleCover was applied to keep it dry during storage, but after about 3 months of use, it began to close poorly and eventually became inoperable.
However, since it was under warranty, it was immediately replaced with a new one, so I have no complaints about the response on the part of the Manufacturer.
I then mounted it directly on Mirror instead of Mirror mount, but I kind of feel like this was the right thing to do from the beginning.
It may not be suitable for high-end Motorcycle, but it is sufficient for the Maine street rider.
I have an AQUOS SH-53C sense7 with a Phone Cover and it is just under 12mm thick, but I have never felt particularly worried about dropping it, and when I run long distances I always stop the included Elastic band in two diagonal places.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
There are many different types now.
Compared to 10 years ago, there are now many more tools available from various companies to mount a Smartphone on a car body in various forms. With the ever-evolving and ever-evolving convenience, it is stressful to think about which one is best suited for you.
In my case, I have limited opportunities to mount my Smartphone on my motorcycle to view maps etc., so I can detach it when necessary without the need for tools, and if the holding power of the Smartphone itself is at about the 75th level, I am OK with it. I don't feel the need to install a RubberDamper or something else for vibration resistance.
This product from DAYTONA is an OEM of Miknowla, a long-established manufacturer of for Motorcycle smartphone mounts, and at one time it was such a standard product that there was no need to choose any other smartphone mount.
I still feel that this ease of installation and low price still works well in the field. I usually use it as if I threw it under the Seat and take it out and install it when I need it.
View detail
Think of it as a consumable item, maybe once a year.
The Hold feeling is excellent.
I have Rubber's Strap on just in case, but it's so good that it doesn't seem to fall off without it.
This is the third one I've bought, and within a year the plastic part in the middle comes off, it gets rickety, and one of the four holds falls apart….
Spare Parts is also available, but we end up replacing it.
The fact that it is so appealing that I keep using it because I can't find any other good product!
View detail
Steady making
I used to use DAYTONA's soft case type, but I bought this open type product because the heat was trapped in the case and it became abnormally hot, and the reflection of light on the vinyl surface made it difficult to see the screen. The vibration absorption is effective and there is no screen shake, so it is comfortable. View detail
This is my second purchase!
This is my third IncomeBody, including the Body, and it is very useful because I can easily port it to multiple helmets with just one IncomeBody. (as a prerequisite that Body likes it). In terms of price, I chose this one because it costs about 8,000 yen, which is cheaper than the less expensive Income. As for the installation, I installed it in each of the three manufacturers, ARAI, SHOEI, and CUBT, and it was easy to install in all of them. I am generally satisfied with the product, but I am not so sure about the thin type Quantity Speaker, even though Daytona has released a Thin Type Speaker.:It is a shame that Set has not been released. View detail
Fits: BMW S1000RR, KAWASAKI NINJA H2SX , KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX SE+
Mount bar with a large range of motion
[How is it used?
USB charging, for mobile Holder installation
Was the one you received as per Image?
Exactly the same as the photo shown
Was the installation difficult?
The installation itself is not difficult, assuming that there is a hole in the CenterPost of the Top Bridge.
Also note the hole diameter.
By tightening the screw, the Ring expands in the CenterPost and is fixed in place.
It tries to move somewhat even when it is fully tightened. This is unfortunate. However, it is a playful part like BacCrash.
Screw Lock (medium strength) must be used for the screw part.
How was your experience with it?
Very stable and very easy to use due to the wide range of motion.
No vibration, etc. is produced.
Pipe thickness is also common, making it highly Universal.
It depends on what you are going to install, if you are going to install a portable Holder, USB power supply,
I think 100mm is too short.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
CenterPost holes are not well fixed.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail