Reviews
I bought it as a substitute for RZ 350
WHorn of the Original at home
Wiring does not sound when attached to both
Because I had symptoms saying ringing off one side of Wiring
It is purchased with the amount of gold before price rise this time
Although Horn comes out from Yamaha
4L0-83371-3
4L0-83371-40
How high it is too high
I looked like it, I bought this Horn
The difference between Original and the same product
Five places to hold Rivet stop
This product is the difference of 6 places
Sound also Original HI - Is it LOW?
This one has only LOW
I do not mind if it emphasizes looks to the last
When asking for complete Original
We recommend you to expensive Yamaha people
As I mentioned earlier, I do not care about the appearance
WHorn with 350 privileges
It is recommended for those who say cheap
View detail
Used for BALIUS
I have never used Horn, but as I pushed it to try it, I did not ring, so I exchanged it for sure.
OEMBracket of BALIUS is strangely constructed, but since it can not be attached to it, every Bracket is exchanged.
Size of Horn is about Small about once. It faces downward like OEM and there is no interference.
I felt the sound surprisingly large, but OEM has never heard of it before I can compare it. Perhaps it is this kind of thing.
It has passed for about a month in Plating version, but it has not rusted yet.
The price is also cheap, it is a good product.
View detail
4 MINI can also be installed
OEM's Horn sound was poor, so buy it with Wee Big's bargain.
Since MHO-2 is a 2-terminal Type, OEM's line could be used as it was.
Once installed, it is not noticeable.
Clearance with Takegawa made Oil cooler is enough.
Of course Horn's original performance as well as a good sound is emitted.
View detail
very fast delivery.very good quality and very easy to install.nice (low)sound for my bike.I will recommand this product.
very fast delivery.very good quality and very easy to install.nice (low)sound for my bike.I will recommand this product. View detail
Farewell to the miserable sound
Horn of V-Strom was unbelievable sound and it was embarrassing to ring, so I knew it was a good Horn and it was a story that I met with this Horn.
The attention was paid to POP with Exactly on a minicar, and as you watched it sounded quiet and volume.
Of course Size never said in Compact.
It's easy to install, and when you peek from the side it makes your face look a little outrageous.
Because I did not buy Relay, I was worried about volume and Fuse, but there was no problem.
There was only Hazard in the communication of Motorcycle, but Horn also joined this.
It's easier than Hazard, so recently it's ringing Horn.
View detail
Installation is devised, the sound is Spartan
The aged deterioration and poor sound of OEMHorn are motives of exchange.
I was prepared for inevitable innovation from the shape and large size. Parts arrived and we planned to devise an installation at the same place as OEMHorn. OEMHorn's Harness is as it is as a prerequisite. For the time being, we temporarily installed Bracket, Cowl and Meter Bracketetc. , Handlebar as Quantity : Pair (for Left and Right) Bracket was processed and book grouped at a position not interfering even if it cuts all the way. I can see a bit from Upper Cowl, I am the best position on my own.
I do not say the best tone.
View detail
It is a good sound.
NORMAL 's Horn replied, I thought, a little Horn. 500 MHz is quite a good sound.
For installation, remove one Hexagon Bolt and install only. It can be done in about 10 minutes.
FJR's NORMAL place is Tire house (?) It was inconspicuous in inside, it looked like an OEM attached from the beginning, it was a correct answer by purchasing it.
View detail
It is my favorite sound.
NORMAL was like a nose chewing sound, and the volume was small and it seemed to be choppy, so I tried changing it taking safety into consideration.
I think the sound is Large and sound quality is good.
It may not fit the old car a little, but I am satisfied.
View detail
It also sounds with Compact
It fitted well in a very narrow place of BANDIT 250.
Normal out of the missing sound of Ma!
Even if you run a horn, I do not feel embarrassed.
Car also noticed Safety also UP ↑ (^-^)
OK, remove the OEMHorn and pull the cord a bit!
Bracket Included Parts : Bending and fitting.
View detail
Fits: Others for 12V * Attached bracket can be removed for use
Large kimono may be different depending on the time?
【What made you decide the purchase?】 Low price
【How was it actually used?】 It is a better impression than I thought.
【Was it difficult to install? (Hard parts case)】 None.
【Please tell me the point of installation and hang (in the case of Hard parts)】 NORMAL's CUB (Iron CUB) Earth the Minus on the car body if you attach it to.
[Is there anything I was disappointed about?] None
【Hope for Manufacturer - Please tell me if you have any improvement points】 PetitPetit is too delicate so let's make it a bit thicker ...
【Have you compared items?】 Hirochee Horn, OEMHorn
[Others]
CUB 90 Switch to Other Company Product (CEVReplica) We purchased it as necessary for replacing. Simply
I decided by the price.
In case of CUB, Horn is ON-OFF controlled with Plus Rare Spec. Because of the outside switch
Then Horn stops working. I would like to control it with Minus, but if the Minus terminal is
It's a bit difficult as it has been carelessly Body ground without it.
So, Plus and Minus' Wiring are firmly equipped Horn is new and necessary
That's it..
Aside, Horn itself is very textured and the volume is sufficient. Although it is inexpensive, the thing itself is pretty good.
Bracket's Length is as shown, but as you can see the Lornness of Horn Body is a little Small.
Manufacturer's notation is 70 mm, but the actual product is only 66 mm. The markings are also quite different.
Large may differ depending on shipping time.
There is no problem in operation itself, so it is better for Small to be better than for Large, so there is no problem personally.
I think that it will be GOOD shopping if you pay attention only to the point of Large.
View detail
Self-assertion is amazing! (Lol)
Walking with a smash hoarding Shit cricket purchased for repelling
"Pea" It sounds like a sound is not it (Lol)
Also, the traffic situation of Nagoya where I live is not good - - - (~_~;)
I think that the installation position is different depending on the model,
Installation of the Z750R in the NORMAL position is unexpected, difficult (Lol)
It may not be helpful because there are few people riding such a rare Motorcycle
Assertiveness is intense when it is NORMAL position.
I dared to put that position - - -
In the case of Full Lock & Full Bottom, it seems to interfere with the front wheels
There will not be such a situation first (LOL)
I feel that Bracket's Plate is somewhat thin
It seems better to check Check Mame.
Oh, I forgot (~_~;)
There is no problem for the sound of the sound.
It is a substitute that can be used about 10 times NORMAL (^_-) - ☆
View detail
Fits: HONDA APE 50, HONDA APE 100
Minimoto APEHorn Relocation Bracket
MINIMOTOMinimoto APE Horn Relocation Bracket Made in Japan
I moved Horn because I took Light Bracket out of the office.
At first I tried to make it made by Mukawa, but because I made the Top bridge made by DAYTONA, I did not attach it
I replaced it with a cheap Minimoto made.
Instruction Manual is a little hard to read but I chose cost performance from other companies with Cost performance
View detail
Excellent Classical atmosphere!
I installed it in the W650. First of all I like Classical looks. There is also firm presence. It is unexpectedly higher than this Horn if you are investigating other Classical Mirror in various ways. Made in Taiwan's common cheap Horn will only look something like that. In other words, I think that Horn from posh here is expensive for a moment, but I think that it is satisfactory when considering the appearance and COSPA.
The performance of Horn is also quite nice!
View detail
I will interfere with poning.
Since it interferes with Front fender in poning, process Bracket, remove rain shears and install.
Sound sounds like a trumpet sound, I do not like it much, but better than OEM.
View detail
CB600F HORNET 07 PC41
I installed it in CB 600 F HORNET PC 41.
If it is a mounting position of NORMAL, it will protrude
It is a place to worry, I'm waiting for the time being.
The sound is good!
View detail
GSR250 Mistuba ALPHAII
【Why did you exchange Horn?】
In Indonesia, there are many motorcycles in rabbit, lane change is not polite like in Japan. I thought that installation of Horn which is conspicuous also to inform the opponent of my whereabouts is an urgent thought I exchanged from OEM to Mistuba.
【Why did you choose MistubaHorn】
Previously, because I was using cars and I liked the sounds themselves.
There is no elongation of the scale as young people DQN is ringing, which is fun ~ ♪, it is a short and powerful Simple sound with fans!.
Mistuba Sancoa's HP http : / / www. mskw. co. jp / car / car-horn / mbw-2e17
There is also a Sample sound, but actually it is more bass sound.
And there is only Manufacturer which is also adopted for OEMHorn and reliability is outstanding. I will replace my car or Motorcycle before Horn is broken (^^;)
[About installation]
In the case of GSR 250, OEMHorn's fixed Bolt (10mm) Just pulling out the flat terminal of Plus minus and replacing Mistuba's Horn in the same way completes the replacement itself.
However, in this method, water will accumulate in the flat terminal Cover, so it is better to slightly extend Wiring and turn the Elbow side of the flat terminal Cover downward.
There is a note in the Instruction Manual, but I should not loosen the fixed Bolt of Horn and Bracket. Depending on the type of car, you may wish I could change the installation angle of Bracket for a bit more.
【Impression after installation】
I did not feel that it was such a big loud sound as it was in a car because it was in the car, but with Motorcycle 1. I feel it sounds like Large about 5 times. I think that it was not heard much by car people if it was an OEM's Horn, but I think that this would make Appeal sufficient existence. The appearance may be inconspicuous because the OEM 's Manamaru BlackHorn is integrated with Motorcycle.
In areas and environments where it is necessary to sound Horn it was sufficiently meaningful.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
A bit sorry - - -
It was just a good product such as price and Large Kimono, but the item that arrived was long-term stock or was dirty.
Because I did not want to install it dirty, it wiped lightly with a dry cloth. Polo Polo and Plating come off Peeling off.
Besides, because my friend asked me the same item, Quantity : 2pc. Buy and buy Quantity : 2pc. Plating is dirty as well as Set - - -
It is surprising that there are such products in this era.
View detail
Though I rarely use the horn, I ordered through web to adjust my order amount to make its shipment cost free.I chose the trusted PIAA Sports Horn.I checked the frequency with YouTube many times, and selected 500Hz.I installed it on
Though I rarely use the horn, I ordered through web to adjust my order amount to make its shipment cost free.
I chose the trusted PIAA Sports Horn.
I checked the frequency with YouTube many times, and selected 500Hz.
I installed it on KAWASAKI Z800.
Fortunately, the terminal form (flat 2-terminal type) of the OEM horn was the same as this one, and I was able to install it without extra processing. (Still, the terminal orientation of this horn differed, and I needed to reach out for the harness for it was a little too short.)
Its high beeping sound has now changed to a more deeper sound, and I'm happy with it!
I have an OVER engine slider on my motorcycle. And as you can see, I had to install the horn to a place very close to the exhaust pipe, for the clearance between the slider bracket and exhaust pipe was too little. I had to make sure that it didn't touch the bracket.
I am a bit worried about melting due to heat, for the horn body is made of resin.
Since it has a dust cover, I'm counting on its durability.
View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
The horn looks like the stock one, but chrome finish makes it resonable. The sound is very weak, but this is still a moped horn. Also it's better not to touch the tuning screw.
The horn looks like the stock one, but chrome finish makes it resonable. The sound is very weak, but this is still a moped horn. Also it's better not to touch the tuning screw. View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
The Brand called SP Mukawa became the first conclusive factor.Although the phon itself looks poor, sound volume and tone quality are satisfied.Moreover, since it is a Chromeplating, it is very a Beauty.
The Brand called SP Mukawa became the first conclusive factor.Although the phon itself looks poor, sound volume and tone quality are satisfied.Moreover, since it is a Chromeplating, it is very a Beauty. View detail