Reviews
Great tone
I installed it on my SR400, removed the OEMHorn and tried to install it in its place! But the plastic cover got in the way and I had to remove it and cut the bracket I was able to install it without any interference 。 As for the tone, I'm satisfied with the sound, which is much larger than I imagined View detail
Large size
I installed it in DT230 LANZA I think that Horn that had originally arrived had deteriorated or the volume was sounding too small They didn't notice it, so I decided to replace it at my own peril, but when it arrived It's a little bit larger than OEM, and it was decided to install it after some thought With the Horn, the place to attach the Connector is on top, but with this Horn, it interferes with the So I adjusted the position of the attached bracket and installed it horizontally As a result, it was possible to wear it without interfering anywhere, so it was good, but I installed the Connector sideways The waterproof property is a little doubtful because it has become a little bit I'm a little worried about that because it got bent Well, I think that Large is strong
The volume is a satisfactory Level It's not too loud, but almost like a normal horn But the tone is a little muffled and a little out of tune LOL Some people might be bothered by this
View detail
It's the best of all worlds for vehicle inspections
It's been four years since I bought it
It's still intact
I used to divert the moped stuff I had lying around
The bracket was broken by the vibration and was useless
The brackets are strong
Compact
I think it's a very good product because of the sound it makes
(For practical use, the volume is small, so this is for car inspection purposes.)
View detail
Everything is fine
I ordered it for installation on a carburetor Honda Super Cub C50. The old signal had one contact, this product has two. The "extra" contact was closed with a short wire to the signal body and everything worked. Buzzing loudly, tonality is normal, not squeaky; I didn’t even try to turn the tuning screw, and so everything suits me. The workmanship is also completely satisfactory. Ordered for installation on the carburetor Honda Super Cub C50. The old signal had one contact, this product has two of them. The "extra" contact is closed with a short wire to the signal housing and it all worked. Humming loudly, the tone is normal, not shrill; I did not even try to twist the screw settings, and so everything suits. Workmanship is also completely satisfied. translated by Google Translator View detail
Pia Bumpy
I bought it and received it in 3 days. Request for delivery by default. It seems to be a little cheaper than the domestic internet price. The only disappointment is that the manual is only in Japanese. I wish there was English too. Packaging is in good condition and not yet installed. Ducati Monster 821. I plan to install it by referring to utop. Purchased and received in 3 days. Apply for shipping by default. It's a little cheaper than domestic internet. One thing is that the manual is in Japanese only. I would like to have English too. Packing is in good condition and not yet installed. Ducati Monster 821. I will install it by myself. translated by Google Translator View detail
Necessary and sufficient for an OEM replacement
Purchased as a replacement because the OEMHorn stopped working
In the LITTLE CUB, the grounding wire is required separately, but it's a large Difficult to install because it's not a job
The ease of the game is low
Size is almost the same as the OEM, and the cost performance is also high, so it is a good substitute for Necessary and sufficient
View detail
A little more volume and sound quality
I bought it because I thought it was almost the same as the OEM Product When I installed it, it's almost good
However, the volume and sound quality are somehow lacking
The OEM Product has a more solid tone and volume
I feel like I'm missing something
So I give it this rating
View detail
Fits: HARLEY-DAVIDSON Side mount Horne 93- (except V-ROD,Street model)
Not Exactly, but …
Installed in XVS950A
I changed from OEMHorn to ALPHAIICompactHornLO, but the chassis is I installed this Cover because it is green
If you look at it from the side, you can see half of the Horn, but on the contrary, it is very present
Slit is very cool
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z10012VUniversal, KAWASAKI Z2 (750RS), KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4)
Horn 12V 3A
This horn by Doremi Collection is a Nikko Horn. There are two sizes available : Large and Small. I bought the small horn and it is very good in fit and finish. The connector thimbles are also quite robust. It has a vintage style sound and is perfect for older classic Japanese motorcycles and on the newer Triumph twin motorcycles. The price is also very cheap considering similar horns are selling on eBay for twice the amount. Highly recommended!! View detail
Pia sports soul..
I bought it at a good price. I bought it last time and installed it myself. It can be installed immediately without installing a separate relay. The sound is great for a single shot. I bought an additional one to install it in my wife's car. The sound is clear and cheerful. I am very satisfied with the price. I bought the price well cheaply. I purchased it last time and installed it directly. Relays can be installed without any mounting. Sound is also excellent for one step.(translated by Google Translator) View detail
Fits: Others for 12V * Attached bracket can be removed for use
It was defective
I purchased this product because the Horn bracket I was using was broken It did not sound at all when I did wiring I diverted only the Bracket because it was too much trouble to return it by a cheap product View detail
It may not be suitable for a motorcycle with a large vibration threshold
I installed it in GSX1100S KATANA. 2 times touring (about 1000?) Because the bracket is very thin, it is a large piece of vibration It doesn't seem to be suitable for Motorcycle Volume and tone are normal Horn Horn should ring This is not a problem for those who are View detail
I bought it at a good price.
I bought it as a substitute for pure soul. The sound is good and the product is good. Delivery is not much later than in Korea. It seems to take 2 days longer than domestic delivery. I bought a single soul because it is subject to structural change. I bought pure genuine horn. Sounds good and it's good. Delivery is not much later than domestic. It seems that it takes 2 more days than domestic delivery.(translated by Google Translator) View detail
Okay farm!
What made you decide to buy?
How was your experience with it?
Was it difficult to install? (In the case of hard parts)
If you have the right Bolt, it's easy, easy, easy!
What is the point or hang of installation (for hard parts)?
Consider whether there are any areas of interference at Full Brake
[Do you have any products to compare it to?
Price and reliability compared to KIJIMA and OEM
The sound is light and quite medium
View detail
This is only good for looking
if you find classic style horn, this is good for you. but, you never expect about nice sound. and this is so big than a i guess.. View detail
![HORN REPL 90-15FLT [2107-0156]](https://img.webike-cdn.net/catalogue/images/35311/21070156_TS.jpg)
Fits: HARLEY-DAVIDSON Screamin' Eagle Road Glide FLTRSE-I, HARLEY-DAVIDSON Sportster 1200 XL 50, HARLEY-DAVIDSON CVO Fat Bob FXDFSE, HARLEY-DAVIDSON CVO Electra Glide Ultra Classic FLHTCUSE4, HARLEY-DAVIDSON CVO Electra Glide Ultra Limited FLHTKSE, HARLEY-DAVIDSON Softail Springer Classic EFI FLSTSCI, HARLEY-DAVIDSON Road King Classic EFI FLHRC, HARLEY-DAVIDSON CVO Fat Bob FXDFSE2, HARLEY-DAVIDSON Softail Street Bob FXBB, HARLEY-DAVIDSON Softail Street Bob FXBB, HARLEY-DAVIDSON Super Glide EFI FXDI, HARLEY-DAVIDSON Tour Glide Classic FLTC, HARLEY-DAVIDSON 883 Hugger XLH, HARLEY-DAVIDSON Softail Fat Boy EFI FLSTFI, HARLEY-DAVIDSON CVO Softail Convertible FLSTSE, HARLEY-DAVIDSON Screamin' Eagle Dyna FXDSE, HARLEY-DAVIDSON Fat Boy S FLSTFBS, HARLEY-DAVIDSON Street Bob FXDB, HARLEY-DAVIDSON Screamin' Eagle Electra Glide Ultra Classic FLHTCUSE2, HARLEY-DAVIDSON 1200 Roadster EFI XLR
I'm sorry
When connecting the connection terminals, it does not sound when Horn switch is pressed. I thought that the volume and sound quality of HarleyOEM were the poorest sounds when I thought that sound was produced by turning the volume Screw, but it is the same as Horn of the original Scooter. I can not install it. View detail
this is good
Used by FTR 223 asked for a friend to Restore. It was in a condition that the sound of OEM Product rarely sounded, so I exchanged it for Kore. Connector shape also matches, can be mounted Tan. I think sound volume is also normal like Motorcycle. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Can not install.
I purchased it because I wanted to omit various things,
Bolt included does not fit. If I bought Bolt again somewhere,
I should have bought Bracket and process it and install it from the beginning.
It is very disappointing.
View detail
The volume may be Large,
Since the volume of the OEM Product is on the same level as the original, there is not enough volume to appreciate around, so I replaced it for this product. Before, we attached automatic for Vehicle.
This product has enough volume, Large Kimi is also Compact so it is unnecessary to choose a mounting location.
View detail
Good high tone horn
This horn gives a high tone. When used in conjunction with the 500Hz, the sound is more resonant. Overall, I think there is a more PIAA Slender Horn dimension, which is 400Hz+500Hz. But the PIAA Sports Horn can be set up to 600Hz. View detail