Reviews
great design
Hunter Cub's stock mud guard is smaller than expected
It looked cheap, so I bought it and installed it.
The performance after installation is that the size has increased, allowing it to function as a proper fender, and the design is also excellent.
I plan to purchase additional front guards -------------------------------------------- --------------- Hunter Cub's genuine mud guard is smaller than expected It looked cheap, so I bought it and mounted it. After mounting, the performance is larger, so it is possible to function properly and to design. The front guard will also be purchased Powered by Google Translator
View detail
Fits: HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY
Lowers your front fender
Very high quality machined piece to lower your front fender down. Greatly improves the visual look your Z50. I purchased it at the same time with new fender rubber grommets to complete it. Installation is easy and simple, just 10mm spanner required. Shipping was fast and the product was packaged well A+ View detail
PyramidPlastic Red R258 Rear Fender
[Usage]
・Touring
Image Street?
I bought it because I thought it would go well with the OEM color Red RC211VPLOTTypeMotif color.
Finished as per Image.
Is it difficult to install?
Easy
ExactScrew hole fits, not possible, but no machining was required.
How was your experience with it?
I'm satisfied with the results as shown in the Image.
[Included Parts:were they on?
With Mounting Screws and Instruction Manual are only available in English with no illustrations.
[Was there anything that disappointed you?
Nothing in particular.
Rear The part of the suspension that prevents dirt from splashing onto the suspension is not perfect, but it is only slightly less prone to dirt.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125
Parenthesis is good in its detailing.
The Yoshimura logo and the cutting out of the flesh in some places are cool.
I am glad I purchased this because extravagant OEMFender can be put together with Refreshing.
OEM Colgate Tube was used with a slight cut.
Wiring processing required.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Replacement for OEM grommets
I got these as a replacement bush for my new fenders. They fitted much firmer in the holes and are a excellent price vs oem. Super basic and easy to install. A+ View detail
It gives a sense of cohesion and unity.
In addition to this product, I have installed a long tail cowl and a special grab bar made by Archi, and I think that the total effect is to make the rear area look more cohesive and to reduce the feeling of being too small.
After much deliberation, I chose the Carbon ones, which were more natural than I had expected and did not make more of a statement than necessary.
I found the product precision to be good and the design in line with TireArch to be excellent.
It was smoother to install the footpeg after removing the bolt that holds the Tandem Footpeg and the Silencer.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA SMAX[1DK], YAMAHA FORCE155[BH9]
Cool！
Installation is easy and cool.
Minus was slightly distorted.
No problem once installed.
View detail
Simple and cosy.
It is a solid and cost-effective version of the existing Fender Eliminator.
However, Reflector must be purchased separately.
Material:I also have a Fender Eliminator in Aluminum, but it is a bit heavier.
Ah! The box is pretty cool lol.
View detail
Started to hear strange noises from the Number.
It was easy to install, but because the Seat and the Seat are co-tightened together, the Seat almost falls off every time I remove it. Also, after installation, I started to hear a chattering sound from Number, so I put Epu and Sealer on Number to counteract the sound. View detail
Design-wise good
I checked the video on the web before starting the work. The coupler for the number-plate lighting line cannot be removed unless the cowl behind the seat is removed. It took a little bit of time to remove and install the Carrier Plus, but the installation was completed without any problems. After installation, I found that there is a protective tube on the exposed line from the Number Plate lighting and that there is a gap where it enters the body of the car. It looks more expensive than other products (plate type products). View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Flexible angles
I was looking for something with an adjustable angle and came across this Fender lessKit.
This was my first time replacing it myself, but I was able to install it without any problems!
I tried to install it, but it stood out because the body is black and the kit is silver, so I painted it black and reinstalled it.
I am satisfied with the product, but if I had to say something, I would say that the License Plate Light is a bit large and assertive.
The angle of the Number can be adjusted, but not the back petals.
(I fix it at less than 40-Degrees inside the regulations)
I use the Nano Blinker, so I have not used the included Blinker sTaperts. I was satisfied with the product for such flexibility!
View detail
water protecter~!!
Kizima products don't disappoint. I bought it to fit on Monkey 125. Fenderless kits were fitted, so they needed protection from soil/water splashes. It's a rubber with a large size and strong material. I think it's durable, too. It's still before fitting, but I think it'll look good on you after matching it. The checkered design also looks very sophisticated. I'll use it well. Thank you. View detail
Cb400 fender eliminator
The Daytona fender eliminator kit is a high quality Japanese piece. Even with the instructions in Japanese it is not hard to install at home with basic tools. With the option of the reflector the keep in line with some state laws(if you want) it makes the tail end look so much cleaner and would recommend it to anyone looking for a clean look. View detail
It's a good look.
I am satisfied with the product exactly as I wanted.
It looked great and I couldn't stop looking at it!
View detail
Fender Eliminator not only removes
I bought this to clean up the Fender of my 890 DUKE R. Since simply removing the Fender was not enough, I chose the well-designed Billet License Plate Holder.
Even though it is an Exclusive Design, it is a difficult structure to assemble. Above all, we had a hard time with the wiring process. The result is a satisfactory finish.
Normal muffler is going to melt Blinker soon, so I am attaching Guard separately. This is honestly kind of lame, so it needs to be considered.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
American・DREAMZ900RSCarbon rear fender
The product has high quality in both design and texture. View detail
I'm being dry, but ...
First of all, installation is quite troublesome, especially if the Rear Carrier and Box are installed.... WiringCover- and Boots are not included for the high price. Although the wiring retractable part is designed to minimize water intrusion during mud splashing, there is a slight gap, so the part was treated with coking. After installation, it looks more expensive than other products (in fact, it is expensive...) and Parenthesis is good. View detail
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
optimal solution
It is a good and well-made product.
The OEM Blinker, Stop-lamp, and License Plate Light can all be used and fit perfectly.
The price is low, so I give it the highest rating.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Impression
I was looking for a z900RS with an integrated FenderArm and the design was good.
Overall, the tangerine skin of the Clear coating is noticeable.
If you can do it, it will be much better if you repaint Clear and apply mirror finish.
Compared to other Manufacturer's carbon parts, the overall black color seems to be less intense.
I felt that the mesh on the reverse side was poorly processed, even though it is not visible once installed.
View detail
To!
Plain weave is better Parenthesis than twill weave!
I used to be obsessed with twill weave, but plain weave was cheaper than twill weave, so I ordered plain weave on the spur of the moment and discovered the advantages of plain weave… lol
View detail