Reviews
Fits: SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT
Can also be installed on the GSX-S1000GX.
[How is it used?
It was installed to minimize damage when standing up.
It's a component I don't really want to be a part of.
Was the one you received as per Image?
It was exactly as shown in the image. I had previously installed a Frame direct mount on a different model car, but this time I chose the Plate type because the bolt might bend in the event of a fall.
Was the installation difficult?
I asked Shop to help me with the possibility of the Engine falling off during installation.
How was your experience with it?
I like it because it is not that noticeable.
[Included Parts:were they on?
InstallationInstruction Manual was kindly provided.
[Was there anything that disappointed you?
None
Point and hang of installation
It would be possible for an individual to install it if there is a Jacketc. just in case. It may be a good idea to install one side at a time.
[Opinions and requests to Manufacturer
It seems that all GSX-S1000Series can be installed, so I hope you can add compatible models.
View detail
BABY Face Engine slider CBR600RR
The installation position is Exactly, high quality, and I am satisfied with it. View detail
It's great.
The quality is good, Designma good. I hope it will not be active ^_^ View detail
Engine protector
I bought it because I wanted to protect my Engine from being scratched easily, even after just one stumble! I have not fallen over yet, but I put it on as an insurance policy. It is easy to install, so I recommend it! View detail
Genuine GBRacing Frame Slider Set for YZF-R6
This bike came in and the customer wanted the full kit of protection for their bike as they were planning on taking it to the track this year. My very first thought was of course GBRacing as they are well reknowned for excellent protection. Webike do stock a lot of GBRacing products for various models and manufacturers. I found the correct part by cross referencing GBRacing website.The price was about the same as I could get locally but they did not have the stock, Webike did. With a few other parts, all shipped by EMS and arrived undamaged in 5 days.These crash protectors are a sturdy piece of kit. You can see that there is a lot of material to wear away before any damage can be made to your engine or surrounding parts. I personally have had a small low side and the crash protector did their job perfectly. With these added, this is what we are hoping for too. The machining is brilliant, very well presented. The bolts they provide which are of course longer than you remove are stainless steel so will be just fine. A word of warning if you do not already know, put a support underneath the engine itself. Just remove one side at a time or you risk the engine dropping and then you might come into difficulty. If all else fails, I do tend to have a jack under the rngine before I remove or even loosen any bolts for these items. Take your time, make sure you do not cross thread the bolts and you will be just fine. Torque to instructions and off you go. Thanks Webike, very happy. View detail
Slider
I installed it myself and it was very easy. I can ride my motorcycle with peace of mind. View detail
Easy install, great protection, great quality
Installation on motorcycle frame is easy. Does not require removal of engine mount bolt. The slider mounts using a small hole underneath the main engine bolt. All bolts provided. Tested it by falling my bike over on the left side. Handlebars and footpegs do not touch the ground. Great purchase for the price! Item quality is great. View detail
easy to install engine slider
About quality and texture : solid product build About the feeling of use : i feel safe using this slider on road Products to buy together : u can use this on Gixxer 250 Difficulty of installation : easy , just remove original bolts and install bolts provided Cost performance and comparison with other products , pricey but not easy to find similar high quality products About shipping and packaging : very well packaged, fast shipping Any concerns, cautions, or advice when purchasing : product quality is good View detail
Nice and discreet.
The installation method was easy to understand and quick and easy to install.
If the Bolt on the Engine Mount can be removed. But, it's a story of "if".
If you are a woman, or if you are not strong, or if you don't have the proper tools, have the store put them on for you.
I am very satisfied with this product because it is not a big slider, it is small in shape, and it does not require any processing for cowl.
So far I haven't had any help. (Not falling down) I don't know how effective it is.
View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword)
Slider installation
It is not cheap, but it has a good quality. After installation, I think the parenthesis has improved. I don't know how effective it is because I haven't rolled on it. The installation was done by one person, but it was a little difficult to tighten the wrench lever while pressing it down with my foot from the bottom because it is co-tightened from the Both Sides. View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 400
Mounted on ZEPHYRX
The installation was easy, and the installation was done according to the instruction manual with the Torque indication. The engine looks quite large at first after installation, but I hope this will be enough to guard the engine. I will ride carefully so that I don't have to take care of this product. View detail
I think it is cosmetically good.
I think it is a good product in terms of cosmetics, but I would like to see some improvement in design. View detail
I've been using it well since purchasing it.
hello. I am the owner of a 19 year old Z900RS Hongryeon in Korea. I purchased the engine guard I always wanted at WeBike with a 20% discount on the overlacing engine guard.
A jockey is required to install this product, so be sure to install it at the center!
I hope there will be more sales in the future ------------------------------------------- --------------- hello. He is the owner of the Z900RS 19-year red lotus in Korea. I bought an engine guard I usually wanted to have with a 20%discount on the over -racing engine guard at Wewbike. Be sure to install it in the center because you need jaki to install the product! I hope there will be more sales in the future. Powered by Google Translator
View detail
Fits: DUCATI STREETFIGHTER V2, DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI PANIGALE V2
It may not be the original use.
When I was standing up, this probably saved me from damaging my Cowletc. (not guaranteed in all situations)! (Not guaranteed in all situations) View detail
Fallen cannibals
[How is it used?
I installed it on my last model CB400SF.
This is a beginner's family Motorcycle and there are concerns about standing and falling,
There are several manufacturers, but I chose this one because of its simple design.
Was the one you received as per Image?
Yes, Aluminum base and DURACON SliderBody, Color, Bolt Quantities:Set. Decorative stickers are included, but I did not apply them. I thought about Pipe Bumper, but I decided to use Refreshing Bumper.
Was the installation difficult?
Tools used:14mmSocket, Extension bar, Breaker bar, 14mmSpanner for holding the nut on the back (or Glasses Wrench) Only.
I used a breaker bar instead of a ratchet handlebar because the NORMAL Engine Mounting Bolt is tightened hard. Especially on the Left Side, the Nut is located close to the Radiator hose and the Exhaust System, so it is best to work on the Engine when it is cold.
If you work on one side at a time, you don't need to use Jack and it's Large sturdy.
How was your experience with it?
I hope you don't have to come in.
[Included Parts:were they on?
It comes with a Sticker that wraps around and attaches DAYTONA! As you like.
[Was there anything that disappointed you?
I think 10mm longer would be more secure.
Balance between design and function is difficult.
View detail
The beauty is that no drilling is required.
I bought it just in case. The quality of the Bracket is high, and I would be happy if the price were lower. View detail
Stylish Slider
Straight forward installation. Able to install with stock exhaust. Just need to unbolt the exhaust and pull it down for the installation. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1100
I think it's good
I haven't put it on yet, but it seems sturdy. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Good shape!
The streamlined shape is very cool, not the common Round Type.
The price is higher but it is a good buy because it reduces direct Damage to Cowl.
View detail
Fits: SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT
It's best not to use it, though.
Worn to prevent scratches when standing up. It would be better if I didn't have to go out….
The effectiveness is unknown.
To install, simply remove the OEMBolt and install with the supplied Bolt across the collar.
I think it would be better to use Torque wrench.
Since it is a two-point fastening, there seems to be little burden on Frame in the event of an accident.
View detail