Reviews
Perfect appearance
I'm not mocking it up,
Effectiveness is unknown,
It is better to think of it as a dress-up,
And to think,
I think the price is high.
View detail
Mounted on REBEL 1100
I bought it to install it by myself, but I had to remove the Mount Bolt from the Engine... I thought it was too much to handle, so I had the Shop install it for me. It took about 2 hours even for the experienced staff. I am satisfied with the tightening of the foot and the improvement of the parenthesis. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR, DUCATI , HONDA , KAWASAKI Z800, SUZUKI , TRIUMPH DAYTONA675
The texture is elegant.
I bought it just for the looks.
The quality is good and I have no complaints.
View detail
I've been using it well since purchasing it.
hello. I am the owner of a 19 year old Z900RS Hongryeon in Korea. I purchased the engine guard I always wanted at WeBike with a 20% discount on the overlacing engine guard.
A jockey is required to install this product, so be sure to install it at the center!
I hope there will be more sales in the future ------------------------------------------- --------------- hello. He is the owner of the Z900RS 19-year red lotus in Korea. I bought an engine guard I usually wanted to have with a 20%discount on the over -racing engine guard at Wewbike. Be sure to install it in the center because you need jaki to install the product! I hope there will be more sales in the future. Powered by Google Translator
View detail
Fits: DUCATI Panigale V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Side Stand is perfect!
Panigale and Streetfighter boots do not have good footing for most Japanese people. I am 177cm tall, but when I use a type of racing boots with the heel covered with a resin protector, like the ones from Pine Starz, the part where the heel hooks onto the side stand is too short and I slip and run away. When I am in the riding position, I can get it out with about a 50/50 chance, so when I am in good health, such as when I am refueling, I can stick it out a few times, but when I am tired, I can't get it out. No more." and I had to get off the Motorcycle and take out the Side Stand. If I had a normal leather or rubber bike, I would be able to get off the motorcycle and put out the Side Stand without any problem.
The AELLA product is almost twice as long as the AELLA product, so the Side Stand can be easily produced.
View detail
Wow that's cool
I installed it because I was lonely around the Front.
Circuit also runs, so Protector in the event of a fall.
I hope it will be ??
View detail
Better than nothing, installation hassle
The Female Screw side did not fit as expected, and I measured it with Caliper. 0.5 millimeter. I managed to insert it by shaving the average thickness with Belt Thunder.
Personally, I think Other Brand Product is the way to go!
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI BALIUS2, KAWASAKI ELIMINATOR 250V, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA400R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZZR1400 (ZX-14), KAWASAKI VERSYS, KAWASAKI VULCANS, KAWASAKI ZRX1100, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000
Convenient for maintenance
It's OEM Parts and convenient for maintenance. View detail
Fits: DUCATI STREETFIGHTER V2, DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI PANIGALE V2
It may not be the original use.
When I was standing up, this probably saved me from damaging my Cowletc. (not guaranteed in all situations)! (Not guaranteed in all situations) View detail
Over Racing front axle slider for z650rs
The front axle slider for z650rs from Over Racing is well made and fits the z650rs stock front wheel with minimal tools necessary to install. It’s a direct bolt on and no other necessary bolts or screws are needed for installation. The sliders tip is flushed on the axle as you can see in the picture and installation time is quick. Just insert it in the hole in the front axle and screw it tight and its done. View detail
z650rs Over Racing rear axle slider
In the picture included, the rear axle slider is attached to the top of the bolt that holds the rear wheel. This is possible because the z650rs has a hole in the rear axle unlike in the other z650 lineup. It is an easy install and the sliders looks and feels well made. View detail
Engine guard for z650rs from Daytona
The engine guard from Daytona looks good on the motorcycle as you can see in the picture and fits the frame. The screw included in the item is a bit short but it is something you can buy on your local hardware so not really a big problem. The welds can be better also given the price of this item. Overall, its an OK product. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
The footrest for Monkey
I bought a footrest for a Honda Monkey, I really liked it because it is made of aluminum and is not adjustable - the length of 19 cm is what you need. It came up without any problems, the installation is fast and easy. The price and quality are minimal. I recommend it to everyone. I bought a footrest for the Honda Monkey, I really liked it because it is made of aluminum and is not adjustable - the length of 19 cm is just right. Fits without problems, installation is quick and easy. Minimum price and quality are high. I recommend to all. View detail
Simple but good performance
It looks good, but the grip is good, so there is no burden when standing due to the grip of the boots and chassis. Installation is very simple and I think it's good because it prevents scratches.About quality and texture View detail
When the Center Stand is installed, a little effort is required.
The Instruction Manual indicates that the cover under the tank must be removed for installation, but it can be installed without removing the cover.
On the Left Side, the lower claw is first fitted and then fastened with two bands (Large and Small).
The Left bottom of the Right Side Cover interferes with the Center Stand, so it must be trimmed, including the claws.
I think you should cut at the base of Radio pliers and Cutter to Beauty!
Then fasten with Largex2 Band
Bundling Electrical Cord Covers Next Needle Gold Makes Banding Easier
View detail
Installation is done by aligning the machined portion of Thermo on the Right Side.
The Under Cowl is held in place by four mounting brackets. The mounting brackets are held in place by bolt1 pcs, so they can be fixed in any position. Therefore, it is easy to install by aligning the Right Side Cowl so that the notch on the Right Side Cowl matches the protrusion of the Thermo. View detail
80mm for MOTARD in WR
I put it on my WR250R MOTARD, but the height of the STANDIncluded Tip is too low and the motorcycle falls over a lot. It would have been better if the height of the tip could be selected in STANDIncluded Parts:. View detail
Cospar good
I bought this because I was told that without it, the Swing Arm would be scraped off in the event of a fall.
The length of the shaft that came in the first package was wrong, but they sent it to me right away.
I am satisfied with the quality and response for the price.
View detail
Fallen cannibals
[How is it used?
I installed it on my last model CB400SF.
This is a beginner's family Motorcycle and there are concerns about standing and falling,
There are several manufacturers, but I chose this one because of its simple design.
Was the one you received as per Image?
Yes, Aluminum base and DURACON SliderBody, Color, Bolt Quantities:Set. Decorative stickers are included, but I did not apply them. I thought about Pipe Bumper, but I decided to use Refreshing Bumper.
Was the installation difficult?
Tools used:14mmSocket, Extension bar, Breaker bar, 14mmSpanner for holding the nut on the back (or Glasses Wrench) Only.
I used a breaker bar instead of a ratchet handlebar because the NORMAL Engine Mounting Bolt is tightened hard. Especially on the Left Side, the Nut is located close to the Radiator hose and the Exhaust System, so it is best to work on the Engine when it is cold.
If you work on one side at a time, you don't need to use Jack and it's Large sturdy.
How was your experience with it?
I hope you don't have to come in.
[Included Parts:were they on?
It comes with a Sticker that wraps around and attaches DAYTONA! As you like.
[Was there anything that disappointed you?
I think 10mm longer would be more secure.
Balance between design and function is difficult.
View detail
I'm not sure how effective it is, but just in case.
The quality of the slider itself seems to be a little small. Well, I bought this Slider just in case. I don't know how well it works yet, and I don't want to know. I don't even want to know.... View detail