Reviews
![SPI-H19 Shift Position Indicator Exclusive Kit [for CB400SF H-VTEC SPEC 1/3]](https://img.webike-cdn.net/catalogue/images/41170/protec001_TS.jpg)
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
I received a damaged product and it cannot be used after installation according to the instructions. I also shipped a broken monitor without QC.
Received damaged goods, which cannot be used after installation according to the instructions. Even the broken monitor will be shipped without QC ---------------------------- ------------------------------- I received a damaged product and it cannot be used after installation according to the instructions. Even the broken monitor will be shipped without QC. Powered by Google Translator View detail
Fits: HONDA Super Cub 110, HONDA cross-cub 110, HONDA Cross Cub 50, HONDA Super Cub 110, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50 Pro, HONDA Super Cub 110 Pro, HONDA Super Cub 110 Pro, HONDA Super Cub 50 Pro, HONDA cross-cub 110
Defective product.
Poor quality for the high price. It malfunctions all the time and has many contact failures (even contact resurrector doesn't work). I bought it with the determination not to complain even if I was cheated, but I am so frustrated that I rated it because I just can't agree with it. View detail
Gone in six months.
Measurements were quite accurate.
However
After about 6 months, it started blinking abnormally and the measurements were crappy.
I tried Setup again, but to no avail.
I can't even find the warranty card so it is going to the Garbage box.
It was an unnecessary expense.
This product is shoddy, just like the Chinese products!
View detail
![[Optional Parts] PG-660 Pulse Generator Rotation Signal Converter](https://img.webike-cdn.net/catalogue/images/41170/11295_01_TS.jpg)
Fits: YAMAHA SEROW, KAWASAKI KLX, KAWASAKI D Tracker, YAMAHA SR
I misread the guarantee of conformity.
As stated in the product description This product is part number 11294 (TVM-01). It seems to be an "Option Parts for UniversalTachometer" and cannot be used with UniversalTachometer. I have connected it to 3 different UniversalTachometers and it is completely useless. I had no choice but to buy another product and throw away this one. View detail
Fits: HONDA MONKEY125 ABS, HONDA MONKEY125
Product defective both times.
Purchased and installed at a certain motorcycle accessory store. Immediately after installation, the Lens fogged up and emitted a yellow color.
The product was defective and was replaced by the Manufacturer, but the product sent back had the same problem.
Seriously, I'm disappointed.
View detail
Fits: YAMAHA SEROW, KAWASAKI KLX, KAWASAKI D Tracker, YAMAHA SR
Not available
I used it for the UniversalTachometer, but it was completely useless and the Tachometer is still unresponsive. View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO
Frustrated with Manual.
I haven't even used it yet, but I installed it on my CUBJA07 and destroyed the body.
The Harness is short and both the Harness and Instruction Manual call for the power supply to be taken from the IGCoil, but the Manual does not give enough warning, so I connected it to the wrong side.
After I broke it, I read the Instruction Manual carefully and found that it says "Connect to the 0-colored Connector side of the IGCoil. It says "Connect to the 0-colored Connector side of the IGCoil", but the Harness shape is the same and the side of the Harness that should be connected is hidden. However, the Harness shape is the same and the side of Harness that should be connected is hidden, so I connected it without thinking and this situation happened.
I think you should try to get the power from another source, or give more warning in the Instruction Manual.
15,000 yen was an expensive study fee.
View detail
The one that was sent to me was not Cover processed as shown in the picture, but a normal METAL resistance.
It was a lot cheaper to buy a regular METAL resistance.
At least make it the same thing as the picture. I feel cheated.
View detail
I don't think I explained myself well enough!
I ran with a Can Seraer.
It cancels the Blinker, but
After all, you have to CancelPush the
That's the problem!
I'd like to see that in the purchase description.
I'd advise caution if you're considering buying one!
It's also quite difficult to install, so it's not for amateurs.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
A shitty product.
High beam and low beam Kelvin are different.
Light failure in 6 months. Paid repair even within the warranty period.
Even after repairing, the light does not light up properly. After all, the contact of Control Unit is not good, and Light does not turn on.
I called the company and they were all over the top and said we were fine. I shouldn't have bought it.
View detail
Fits: BMW , BMW R1200RS, BMW S1000RR, BMW S1000XR, BMW S1000R, BMW R1200RS, BMW S1000RR, BMW S1000XR, BMW S1000R
It sucks
I have a S1000RR 2015 and the bulb stopped working the same day I put it in. I can understand the error lamp but the bulb is defective even though it has a built-in canserar.
By the way, Quantity:2pc. Buy SetQuantity:2pc. It's not even close to Set.
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 50, HONDA little cub, HONDA Super Cub 90, HONDA Super Cub 50, HONDA little cub
worst
For models that do not have a vehicle speed sensor, the possibility of reading error is likely to occur. Even though contacting the Manufacturer and adjusting the position of the magnet several tens of millimeters, the 2nd speed to the 4th speed were not recognized. Two models of Others (With vehicle speed sensor) So it was a pity that we had no problem. View detail
Bad voltage
I purchased it to attach to S1000XR but it appeared in Meter when there was an abnormality in Lamp. When contacting PROTEC it was said to attach a resistance to stabilize the voltage, but it was said that abnormal Lamp did not disappear but it was told once again that the voltage did not stabilize and it was said that there is a motorcycle that does not fit, so use abnormal Lamp I did but Lamp disappeared. This time Yellow color part of Lamp is 1pc. Quantity : 2pc. We were also vulnerable to set and take off vibrato in the end. View detail
Although I tried installing ...
When I open the box, there are different Control Units of Wiring.
Twice via Webike, at last I inquired, "Controller
We changed the handling Instruction Manual sequentially after changing to new VERSION,
It is in a situation we are not keeping up. Answer that was asleep.
The fact that we do not even attach a sheet of paper separately is quite suspicious for inspection (Made in China) !
When finally starting to assemble to the car body,
■ Instructions for attaching a resistor to a position that interferes with Cable in a prudent manner (Handlebar as Quantity : Pair (for Left and Right) To move to
Because we do not consider it, it will break afterward if attached)
■ Since the fixed Bolt with the cooling unit of the Light unit is only one point in the center, follow the instruction manual
Plate can not be securely fixed around when it turns into light after assembling.
(It is necessary to screw into Light case at Light unit Single Body, Pliers + Dustcloth)
■ Because ControllerUnit is different from product image, Headlight - Wiring to cooling fan is Limit
etc. We have designed somewhat electricity knowledge and designed quality control after productization
Not just neglecting, just vaguely "Good to have" Products ignoring handling
It is a difficult substitute as.
High beams are somehow flying for some reason, so it seems that they will be removed soon.
I can only say that I can not buy it. Real, the star Zero!
(Webike! Has no incompleteness, like no misunderstanding)
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Ninja650
The sophistication of the handling of webike's items was revealed
I purchased 65010 which is exclusive for this product and Lo side for NINJA 2 Helmet 50 R.
But it was a mistake.
First of all, if you were checking the contents of the product, the cooling fan's Wiring had run out.
Of course I sent it back.
And as I tried to install it, there were various problems.
First of all, I installed the valve Valve of the exchange at the position where the OEM's Valve was located, but ... I can not easily hold down the holders of holding down. The reason is that LED Bulb is thicker than OEM's Valve.
I was forced to do it, but I was stopped when I pushed it with the force of half breakage.
Next, the cooling fan behind Valve and the dustproof Sponge can not fit nicely. Too bad.
The extremity is Harness. It does not correspond to NINJA 2 Helmet 50 R.
I brought back the goods, finally returned, I forced it, finally it was over. I think that this work is overkill now - obviously I do not agree with Large. Since it was troublesome to contact webike anymore, I directly contacted Protec.
That said,
Since this year, 65009 and 65010 are no longer compatible with NINJA 2 Helmet 50 R. I also told this to webike.
That's right..
I got out of my body already. Webike Is not it too much?
At the end of the phone, webike was told to tell him to remove the unmountable MODEL from the adaptation table. I called the phone in 2017. 4. It was 19. However, 2017. 4. 30 It is still on the current adaptation table. I do not know whether webike or Protec is bad, but I think we should fix it before a new victim comes out.
After all, it is troublesome to send it back so it is left as it is. It was supposed that I bought Garbage of about 40000 yen in Set. If it is true, come to my house to take responsibility and bring the thing adapted to NINJA 2 Helmet 50 R properly, I want you to install it, but it is impossible, so I give up. It is very unlucky.
View detail
Fits: KAWASAKI ZZR400
Well
PositionIndicatorBody is okay, but the position of Wiring of Harness by car model was wrong and it did not work at all. Although the Wiring color described in the Instruction Manual matches ... I opened it and I got a Wiring diagram so I changed the Wiring of the Connector myself. View detail
It does not become a talk.....--inferior goods. It sent to the Manufacturer. -- the number of a Shift position does not come out probably ..... it has replaced with the thing with the wiring mistake of a Harness, and another Harness. Althoug
It does not become a talk.....--inferior goods.
It sent to the
Manufacturer.
-- the number of a Shift position does not come out probably ..... it has replaced with the thing with the wiring mistake of a Harness, and another Harness.
Although
, next a Position were set to Ok, the display number of daytime stops being in sight, and it becomes normal.
A display becomes thin clearly (it becomes the brightness of night mode).
Business is not done daytime.
It returned again.
What kind of inspection was completely conducted ? .
The thing with the wiring mistake of a Harness, the Harness, and the new article of an indicator body have been sent again.
...... It is the same as before and a display is not in sight.
Not to mention it is not repaired, it indicates to exceeding fixed rotational frequency by a blue Lamp, but it is not displayed.
Furthermore, it worsened.
It is although I have you exchange again when it tells attaching as it is and placing and a cause is known until a cause is known, since sending is troublesome for the time being....... Do you do kindly??? ???. .
View detail