Please login to check coupons
Product Detail
Specification
Type: H7 Hi / Lo (Hi side only)Rated Voltage: DC12V
Power consumption: 20W
Color Temperature: 6000K
Description
●When installed on the Hi beam side, the left and right lights can be switched on at the same time even when the low beam is on.
■By efficiently releasing the heat generated by the LED, the LED can always be lit at full power!
LEDs are characterized by their extremely high conversion efficiency (the efficiency of converting input power into visible light [electromagnetic waves with wavelengths that can be seen by the human eye]), but even so, if the input power is 100%, more than 70% is converted into heat.The Cyclone LED series uses a combination of solid aluminum, a heat sink, and a waterproof cooling fan to efficiently dissipate heat and enable full power lighting at all times.
Thermal management is essential for heat-sensitive LEDs.If this heat cannot be dissipated efficiently, the power must be reduced from the start of lighting or from the middle of lighting.In other words, if you don't have a good thermal management system, you can't get the full potential of LED.
■Adopts a highly durable waterproof fan!
In the Cyclone LED series, Protec also paid attention to the fan which plays an important role in cooling the heat generated by the high power LED efficiently.The fan used for general electronic equipment is not suitable for motorcycles because the bearing of the rotating part is "metal support type" and durability is low.The Cyclone LED series uses a "dual axis ball bearing type" bearing with waterproof performance and excellent durability, which is also used for cooling fans of radiators.It may look small, but it has passed the 20G seismic test for 2 hours!Protech is the only LED bulb for motorcycles that uses a waterproof and durable fan.
■Long life!
It has a longer life than H.I.D.
■Power-saving design!
Power consumption is 30W for H4 / H4-R type and 20W for H7 type, so it is more energy saving than general H4 halogen bulb (12V 55 / 60W).
■Adoption of reliable CREE LED!
Durable and reliable CREE XLamp XP-L LEDs are used for the light emitter.
■Hi / Lo switching!
H4 / H4-R type has 3 LEDs for Hi beam and Lo beam respectively and Hi / Lo switching is available.
■Easy to install!
It is easy to wire by replacing the valve coupler.
■Bright and quick lighting!
Unlike HID, it lights up with full power immediately after power-on.Also, the color of the light does not change gradually like HID.
■By efficiently releasing the heat generated by the LED, the LED can always be lit at full power!
LEDs are characterized by their extremely high conversion efficiency (the efficiency of converting input power into visible light [electromagnetic waves with wavelengths that can be seen by the human eye]), but even so, if the input power is 100%, more than 70% is converted into heat.The Cyclone LED series uses a combination of solid aluminum, a heat sink, and a waterproof cooling fan to efficiently dissipate heat and enable full power lighting at all times.
Thermal management is essential for heat-sensitive LEDs.If this heat cannot be dissipated efficiently, the power must be reduced from the start of lighting or from the middle of lighting.In other words, if you don't have a good thermal management system, you can't get the full potential of LED.
■Adopts a highly durable waterproof fan!
In the Cyclone LED series, Protec also paid attention to the fan which plays an important role in cooling the heat generated by the high power LED efficiently.The fan used for general electronic equipment is not suitable for motorcycles because the bearing of the rotating part is "metal support type" and durability is low.The Cyclone LED series uses a "dual axis ball bearing type" bearing with waterproof performance and excellent durability, which is also used for cooling fans of radiators.It may look small, but it has passed the 20G seismic test for 2 hours!Protech is the only LED bulb for motorcycles that uses a waterproof and durable fan.
■Long life!
It has a longer life than H.I.D.
■Power-saving design!
Power consumption is 30W for H4 / H4-R type and 20W for H7 type, so it is more energy saving than general H4 halogen bulb (12V 55 / 60W).
■Adoption of reliable CREE LED!
Durable and reliable CREE XLamp XP-L LEDs are used for the light emitter.
■Hi / Lo switching!
H4 / H4-R type has 3 LEDs for Hi beam and Lo beam respectively and Hi / Lo switching is available.
■Easy to install!
It is easy to wire by replacing the valve coupler.
■Bright and quick lighting!
Unlike HID, it lights up with full power immediately after power-on.Also, the color of the light does not change gradually like HID.
Caution
*Optional part (No.15201) is required to install this product on HONDA CBR600RR (PC37) ('05-'06).*This product is for Hi side only.