Reviews
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR
10R SE Swing Arm Cover
I drilled a hole in the carbon cover to install it because it interferes with the chain guard, and the double-sided tape is not strong enough. View detail
Cracked.
Postscript.
Crack in Bolt On part under Right without driving 100km.
It was claimed to be sturdy and Bigli...
Even if you fix it with all kinds of glue because of the location, it cracks when you tighten it with Bolt..,
We are currently asking WeBig to replace it.
Since it is FRPMaterial, did you happen to pull a HaGap?
View detail
I'm not sure how long it will last.
I got a used FAZE with this Rear Carrier.
However, about six months after installing the rear box, I casually looked at the motorcycle and felt that the position of the rear box had been lowered, so I looked closely at the carrier and found that the base that attaches to the motorcycle body had been torn!
I understand that the vibration of the motorcycle will put a load on the base because there is no support from below due to its shape, but I never thought that it would happen.
And upon closer inspection, it seems that it was originally re-welded several times with the same symptoms….
I removed it as soon as possible and looked for another Carrier, but there were no parts (including used ones) that would fit the unpopular Carrier, which had already been discontinued for more than 10 years. However, there were no parts (including used ones) that fit the unpopular carriers that had already been discontinued for more than 10 years.
I could not imagine life without the Rear box, so I had no choice but to purchase the same product.
Currently, every time I get in and out of the car, I remove the rear box and check the base, but this is not good for my mental health, so I am thinking of having a local ironworker add a support from below.
The design and texture are very good, so this is the only disappointment.
View detail
![[KEDO] Fender Eliminator Plate Kit](https://img.webike-cdn.net/catalogue/images/98045/KD-62032_01_TS.jpg)
The length of the mounting screw of the key cap is not correct.
The mounting screw for the key cap was too long to fit, so it was shaved off and installed. View detail
Fits: HONDA MONKEY, HONDA CT125, HONDA MSX GROM, HONDA DAX125, SUZUKI Gixxer, HONDA GROM, HONDA SUPER CUBC125, HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA GORILLA, HONDA MONKEY
It is easy to install.・・・
When tightened, I think the Spring washer is adversely affected. In the end, I took out the spring washer, adjusted the spring washer with the adjust nut, and then tightened the bolt additionally. Maybe I am not using it properly. View detail
One more twist and it's excellent!
When I purchased and installed the handlebar grip, I replaced the handlebar grip with a rubber grip from For Motorcycle.
Now for the Review, the person who Tandem'd it said that the hand holding the Handlebar Grip hits the back, so in the summer, the driver's back heats up …w, but it doesn't seem gross if you wear a thick jacket and gloves. w
For those who carry children, it is likely to be safer to have it.
As a driver (MotorcycleUser), I struggle with the sensation of a hard object hitting my lower back while driving. It hurts a little. I would like to put a cushionetc. in between, but I can't because the sitting position is too far forward.
Quantity of Cushion:Pair (for Left and Right) If the Handlebar Grip is located on the backrest, it can be used as both a backrest and a tandem grip, and will be very useful.
I hope Manufacturer will improve it.
That said, the texture of the Stainless Steel part is good.
Also, when using the Center Stand or walking around pushing the Motorcycle, it is a different way of using it, but it can be quite useful.
View detail
parts shortage
Very nice product! The shortScrew is 11, but theQuantity:I was disappointed that only 1 pc was included in the package instead of 2 pcs. I installed it, but one part of the cowl is not stopped, so I'm worried about the buzzing sound in Situation with strong embrace. View detail
Fits: SUZUKI Universal, SUZUKI Universal
It's kind of thin and cheap-looking.
It is only a Carbon Style Seal.
It is thin without thickness and looks cheap.
Well, the price is the price.
Tank cap is dirty and just right for a blindfold!
View detail
It was not for 125CC!
I thought I bought it for 125CC, but the product is for Horizontal Type, so the upper Quantity on the License Plate is not available.:Pair (for Left and Right) has overflowed.
The reason is that I did not carefully check the shape of Engine Displacement Volume and License Plate.
It is a waste to replace it with another product so we use it with the overhang.
Parenthesis bad (crying)
View detail
Looks good, but too shoddy.
Vertia's stuff is basically too shoddy.
It looks cool, but this product is just terrible. Scratches are common, screw holes don't fit, and if you look closely, you can see the quantity.:Pair (for Left and Right) Asymmetry.
ScrewQuantity is used to attach the Parenthesis well, but it is not originally used to attach the ScrewQuantity:The handlebar is not perfect, but it hits the cover of the Radiator, and for some reason, it only hits the Left (as others have done). (So did others).
If you want to put Parenthesis well, you need trial and error.
The price for this Level is unbelievable. Incidentally, the Wide Upper Cowl was also quite poor. I don't have a picture of it because I put it on. (If I take it off again, it will be a hassle to adjust it again.)
View detail
I had high expectations because of the high rating.
I was attracted by the installation method and the design, and I had high expectations for this product because it was highly rated, but I was disappointed because the accuracy was so poor.
I asked the Motorcycle shop to do something about it, and they did their best, but there was nothing they could do.
It's a good price, so it's a bit of a gap, but it's better than nothing, so I'm putting it on.
View detail
It looks nice and neat, but you won't be able to bring it into an authorized Dealer.
Installation was somewhat difficult and the Instruction Manual was confusing.
The angle of the License Plate Holder is adjustable, but of course it is mounted at the proper angle.
However, the fact that it is installed with an adjustable angle in the first place is itself a Color:They are going to be in a Gray state. (From authorized Dealer, Engineering Dept.)
After I installed it, I filled the hex Screw holes with Pate and modified them so that they are not adjustable.
I would not recommend this to anyone who wants to bring it to a dealer for repair, etc., because it will be a problem if you have to remove it after installation.
However, it is a recommendation for those who do not care about the appearance of the Rear Area, and for those who install it at an appropriate angle.
View detail
ab27MONKEY
The adhesive strength of the double-sided tape was weak and it came off. View detail
![WINDSHIELD SCREW KIT [Silver] [KEITI]](https://img.webike-cdn.net/catalogue/14762/05150114_519262f3b2a43_TS.jpg)
For Screen Fixation
I bought this one for a trial so that I can easily clean the screen and remove it.
I wanted Black, but it was out of stock, so it is Silver.
As expected, the Screw head is Large.
It would be better if it were smaller and less conspicuous.
This is what we plan to use for other purposes.
View detail
Bolt cover
It seems to be good for Screw head protection and One point dress-up.Quantity:1 Set of 3pcs., Plastic, slightly stiff.
Installation is fine, but when removing it, it almost cracks.
Lack if you force it off, the color will peel off.
The price is not that much, though, so I would just buy it again.
View detail
Weak adhesion
The one on the Tank is Large sturdy, but the one on the resin part is too weak adhesion!
It came right off ….
The color is more Color than Black.:I think it would be better to say Gray
View detail
There doesn't seem to be any Logo.
When I ordered and received the without Logo and asked for an exchange, I was told that I may receive the without Logo even if I exchange it for a Spec. change.
If you want to buy one with Logo, please be careful.
View detail
Good looking Fitting?
Material purchased at Axxon for about $5,000 for about 6 months.:Material of Carbon Style:I was using PlasticYAMAHA Super JOGZr Wing Blackettes. The shape and fitting were perfect, but it looked cheap, so I bought the Barrier sheet.
First of all, the holes are messed up.
Quantity:Pair (for Left and Right) asymmetry (If you force it to widen it, it looks like it could be done, but it might break.)
As mentioned in other reviews, the actual product is different from the picture shown in the introduction! (I'm ok with design-wise).
I managed to install it, and I'm glad it looks so classy. if only I can get through Fitting, it will be Recommendation. No, I'm not going to make a recommendation, but … I'm not going to make a recommendation.
View detail
Simple and Design, texture, etc. are very good.
Simple and Design, texture, etc. are very good.
This area is trustworthy, as is ZETABrand.
However, because the soft material is designed to fit into the groove of the Air cleanerBox, even a slight bump can cause the hook to the Air cleanerBox to become shallow, making it easy to fall out. (For example, when your knees hit a little when hanging Center Stand, etc...)
View detail
Quantity:Pair (for Left and Right) asymmetry
The welding position of the right bracket is gapped for the price, and I had to force it on a little. View detail