Reviews
baby baby
I chose it after much consideration with other front axle protectors, and I am very satisfied.
First of all, the price is very reasonable. Also, the product quality is excellent. If you buy
Recommended. I believe that the baby face will protect the 23-year-old Katana well. rear axle
It would be nice if a protector came out, but I couldn't find it no matter how much I searched ----------------------------------------- ----------------- I was worried about other front axle protectors and chose. First of all, the price is very reasonable. In addition, the merchandise is also excellent. If you buy it Recommended. I believe that I will keep Katana well with my baby's face. Rear axle I wish I could come out as a protek tap, but no matter how much I found it. Powered by Google Translator
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
Beautiful Coloring and high quality!
[How is it used?
This is not how I intended to use it, but I bought it to replace the slider on the lower part of the Rear suspension on my CB1100.
Was the one you received as per Image?
The product was Beauty and more accurate than Image.
Was the installation difficult?
Bolt can be easily installed by simply removing it and inserting it between the bolt and the bolt.
How was your experience with it?
The dress-up effect is excellent because of its high quality. The color is different, but it matches NITRON's Titaniumium color and is a good parenthesis.
I haven't fallen yet so I don't know, but I think it will protect the Rear suspension and footpeg.
[Included Parts:were they on?
Instruction Manual only, no other Included Parts:.
[Was there anything that disappointed you?
None in particular. Please note that this is originally a Slider for Mini bike, not for CB1100, so any diversion is at your own risk.
View detail
Fits: KAWASAKI NINJA ZX-14R, KAWASAKI ZX-10R, KAWASAKI NINJA H2, KAWASAKI NINJA H2SX/SE
I am satisfied with the high quality and Large
It is a bit expensive compared to others.
The quality of the product is commensurate with the high price, so I don't think I will regret it. I used to install one from another manufacturer, but this one has a more luxurious feel and a better design than the previous one, so I will buy one from the same manufacturer the next time I buy a motorcycle.
Large Satisfied!
View detail
tipping over measures
Use in Gymkhana.
I bought it because the Axle contacts the road surface in a fall and is scraped off.
It is a good product and easy to install.
View detail
It was not long enough and could not be installed.
Installation is easy and anyone should be able to install it easily.
The one I purchased this time could not be installed due to insufficient length.
View detail
I am satisfied with the ease of installation and the appearance of the product.
I am satisfied with the appearance and the Fit feeling when installed.
I have not fallen over, so I do not know the effect.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
Mounted on 10InchMONKEY
Installed on a 10-inch wheel MONKEY.
I think it's pretty cool.
Front fork when it is actually tipped over.
They've protected us and, of course, practicality.
There is
Pull out the front axle shaft for installation.
It is a little troublesome to set the front wheel.
I think it is a good idea to install it just in time for the Timing to be removed.
View detail
recommendation
The weak point is that it is too large, so it is difficult to put in the JTRIP STAND. The weak point is that it is too large, making it difficult to insert the JTRIP STAND. If it is a receiving type, there is no interference at all. View detail
Risk Reduction
[How is it used?
In case of emergency.
Was the installation difficult?
Remove the NORMAL AxleBolt→attach the included AxleBolt (with a hole for the shaft)→Slideretc. and attach the rest of the parts. If you have a Glasses Wrench and a Hexagonal Wrench, all you need to do is to follow the instruction manual. It took me about 10 minutes to do it.
How was your experience with it?
If you look closely, there is a small gap between the brake side bolt and the gold base plate, which is not a good parenthesis.
But overall, I am satisfied with the Dress-up and everything else.
I'm glad I put it on." I hope that the day will never come when we will be able to do so.
View detail
Fits: HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA X-4
k-factory stuff was always good
The left and right sliders are very light and neatly injected. It's simple to install it by putting it in the left and right holes of the front axle. I have z900rs, but I changed the front suspension to raise up light I bought it for cb1300sb and installed it. The middle gold metal ring has a very good design. View detail
Is it useful or not?
It is unclear whether it will serve as a Slider, but it has high Quality as One Point Decorative Parts. The price is reasonable, and it is a gem of Recommendation. View detail
No worries in case you fall down!
[How is it used?
I purchased this car so that I can drive it safely even if I fall down when I go on a long trip, such as touring destinations.
Was the one you received as per Image?
Quality is as good as the Image.
The precision of the screws and pipe lengths, etc., were fine.
Was the installation difficult?
It was a complete Bolt On.
I was concerned about the durability of the Axle ShaftBolt since it is a hole type, but when I saw the product, I was reassured that it was well made.
How was your experience with it?
I have not fallen down yet, but it also has a dress-up effect.
[Included Parts:were they on?
Instruction Manual, Bolt, Shaftetc.
[Was there anything that disappointed you?
I am concerned about the durability as it is anodized and may fade in the future due to sunburn, etc.
For Honda models other than CB1100, CB400SF, CB1300, etc.Fork pitch is the same type and can be used with Hollow Axle Shaft by Bolt On. In my case, I use it with 0 pointsShaft and it works fine.
View detail
I put it on as a cane before I fall.
I had used it on another car before and it protected me well when I crashed on the Circuit, so I put it on this car as well (the slit in the middle cracked because it protected the car body so well...) View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
It is so Exactly that it makes me anxious when I put it on.
Before I put it on, it looked like it might interfere with my work, but it fit perfectly.
It was a perfect fit for my NSR50 Front fork.
I would like to install the balance and the rear, but I am wondering if I should shave 1mm off the Axle of GCraft's Swing Arm because this Slider is too large in diameter.
View detail
Fits: DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI DIAVEL, DUCATI StreetFighterV2
Simple and inexpensive.
I thought I had researched and ordered it, but the PanigaleV4S was not among the compatible models. Sweat
Item number:006-AD007
The length of the Long Bolt was sufficient, so we cut the transparent tube of the Long Bolt by 1 cm to match the length.
It can only be installed if you have a 10mm deep socket.
I am surprised that neither the product introduction nor the Review mentions SheepSocket.
I went to Astro to buy one.
Single Item:about ?,300, Quantity:It is about 2500 for a set.
View detail
Aiming to be WSBK-like.
The standard cover is a rubber cover with a split pin, but it can also be a rubber cover.
Split Pin is not available when it comes to this product.
As stated in the product manual, retightening checks are required every 500 km.
I think it's a good idea for those who run Circuit to have their vehicles inspected rather frequently.
Otherwise, if the frequency of inspections is low, I think it would be better to go as OEM.
View detail
Focus on appearance
I almost never scrape here when I fall (experienced,, sweat),
Well, I introduced it because I thought it was important to look good.
One point of Gold is nice.
It is also well made.
It comes with a detailed instruction manual and is very easy to install.
View detail
Fits: INDIAN MOTORCYCLE FTR 1200 S, INDIAN MOTORCYCLE FTR 1200
Axle SliderRear for IndianFTR
Gil's Axle Sliderfor Rear
Just tighten it with a hexagonal bolt like Front.
for Rear comes with Sticker
View detail
Fits: INDIAN MOTORCYCLE FTR 1200 S, INDIAN MOTORCYCLE FTR 1200
Axle SliderFront for IndianFTR
Axle SliderFront by Gil's
Installation is simply tightened with a Hexagonal Wrench.
View detail
It can be used in Normal stand even though it is PRO ARM.
I originally had a STAND that was not for PRO ARM, but since I could not use it on my CB1000R, it was left in the yard. View detail