Reviews
Good cosmetics if you don't take it on and off often.
[How is it used?
Used on OEM Exhaust pipe and Silencer joint of MainMotorcycle's XJR1300C that had been inspected.
The Exhaust System itself is the same as the normal XJR1300, so Gasket could be used normally.
How was your experience with it?
The exhaust leaks were normally prevented, and this black shiny joint gasket from KITACO was able to keep the exhaust from leaking once it was used.
Even if successfully removed, it is basically non-reusable. This is a type of Gasket that is quite crushed and sealed.
How did it compare to other products?
I decided to go with KITACO because the OEM Product costs 2300 yen.
However, the OEM gasket is a metal type that can be used over and over again as long as the shape does not get messed up when tightened.
I think they are essentially disposable. In fact, it can be used normally.
So it is cosier to buy OEM if you have to wear it on and off a lot.
[Points to note]
Anyway, Gasket sticks to it and I can't peel it off. I wish you could do something about this.
Even if I wanted to make a new Gasket, it just falls apart and won't come off at all.
Can it be removed quickly if I apply something to it before installation?
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Thicker than OEM
Purchased to install YOSHIMURA's Slip-on Silencer.
Since the vehicle was still new, I thought about reusing the one that had been installed, but I replaced it with a new one just to be safe.
It was thicker than OEM, and the insertion was quite snug, with no way for the exhaust to leak, so much so that a Clamp band was not necessary.
View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
Even if it's not OEM.
The quality is good enough even if it is not OEM View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)
Compatible with SEA BASS cars?
When I bought a SCProject Slip-on Silencer from Webig, I searched for Gasket as well.
Motorcycle is GSXS1000 (22) It is
Search by Car Type Also, this product was a hit on the Slip-on Silencer's product page. Gasket is here. Tap it and you'll get a hit on this product. 。
However, the product is actually not usable when replacing Slip-on Silencer.
Because it is for the exhaust pipe assembly (before the catalyzer), the size does not fit.
Slip-on Silencer can help you After Catalyzer." You have to look for it in the "Search by car type" section, but it doesn't show up in the search by car type!
The piping size of the Silencer section of the GSXS1000 is
On the Catalyzer side Φ49
It is Φ54 on the OEMSilencer side.
So, I believe the model number is JPS4. For the Silencer part of the GSX1300R HAYABUSA. fits.
speaking one's mind Search for WeBig products by model. is full of holes and governed by a governor.
Gasket, which recommends when purchasing Slip-on Silencer, recommends non-conforming products that cannot be used.
View detail
To replace Silencer on SR400
It is compatible with YamahaOEM and can be used without problems.
KITACO sells them, but DAYTONA seems to be cheaper.
I don't see any difference in quality.
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R, KAWASAKI NINJA250R
Costa good!
I used it to replace my Slip-on Silencer. It is well made and reasonably priced.
LargeSatisfied. I liked it so much I bought Stock.
View detail
Fits: SUZUKI BKing, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Gasket
I purchased this product when I switched to Slip-on Silencer. It is a perfect product if you have a spare. View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
As expected, don't be stingy and be sure to change it!
It is not an expensive part, so don't be stingy and replace it. Leaking waste is not good for the Machine. I don't feel any problem at all. View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
Value Product for motorcyclist
It's the same as the genuine product & it's so cheap. product quality is awesome I replaced the gasket with exhaust maintenance of TW200 . This is the gasket on the silencer side. It takes a little time to remove the old gasket, but you can rest assured that it is the perfect size and Kitaco brand.while you installing this exhaust gasket to the silencer make sure put anti-seize compound around exhaust gasket otherwise it will seize to the silencer & difficult to remove it.It can be used without exhaust leakage .HAPPY OVERALL.I'M GIVING 10/10 View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
Exhaust System、Gasket
I bought the Exhaust System for my XG250 TRICKER on a whim to change it back from db's to NORMAL. I thought that the quiet NORMAL would be nice once in a while. However, I will definitely want to replace it with db's again, so this time I bought Quantity:2pc. Set purchase. I think I can use it without changing it, but I don't feel good about it. I don't have any particular impression, but it gives me a sense of security of a new product. Don't be stingy and replace them. View detail
Fits: HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FXDRS), HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FLFBs), HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FXBRs), HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FLHCs), HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FLDE), HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FXFBs), HARLEY-DAVIDSON XL1200C SPORTSTER 1200, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FXBB), HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FXLRs), HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FLSL), HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FXST), HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC(FLSB)
It's the best after all.
There are cheaper ones if you look for them, but after using many different ones, this was the cheapest, easiest to use, and longest lasting one. View detail
Necessity for Exhaust System Replacement
Used for Slip-on Silencer, no problems View detail
No quality issues.
Used for NORMAL return for vehicle inspection.
I have purchased from them several times and will continue to do so because the quality is consistent and the prices are lower than OEM products.
View detail
Fits: SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200F, SUZUKI INAZUMA400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI GSF750, SUZUKI GSF1200S, SUZUKI GSF1200, SUZUKI GS1200SS
No exhaust leakage now.
BANDIT1200 (GV79A) The size is perfect, but I had to widen the opening on the exhaust pipe side to get it to fit. Also, I had a hard time removing the existing gasket left on the exhaust pipe side. If you apply some molybdenum grease to the joint, you may be able to remove it cleanly when replacing the pipe. View detail
Fits: KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX150
With especially no problem
With especially no problem View detail
Fits: HONDA SHADOW750Classic, HONDA VT750S, HONDA Shadow slasher 750, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450R, HONDA DN-01, HONDA TRANSALP 600V, HONDA Silver wing 600, HONDA SHADOWPHANTOM 750, HONDA CRF450R, HONDA CRF450R, HONDA Silver wing 400, HONDA Shadow slasher, HONDA Shadow slasher, HONDA SHADOW 400 Classic, HONDA VT400S
Exhaust System replacement
I have been using this product for a few years now and I am very pleased with the results. View detail
Fits: SUZUKI BKing, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Reliable KITACO Gasket for a low price.
The thickness and precision of the steel parts are perfect! View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)
Purchased in preparation for Exhaust System replacement
We will be replacing the Exhaust System on the NINJA1000 soon!
Naturally, I had to replace the Gasket, so I purchased it in preparation.
Since NINJA's exhaust system is a dual exhaust system, two Gaskets are required.
Gasket itself could have been anything, but I chose this one because it seems to be a standard product used by many people.
I can't wait to replace it.
View detail
Fits: HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB400F (2013-), HONDA CBR400R, HONDA VTR1000FVTR1000F FIRESTORM, HONDA CB500F, HONDA CB500X, HONDA CBR500R
No different from OEM Product
Replacement for Maintenance.
No different from OEM Product
View detail
Fits: KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled)
If it is a bit cheaper
I bought it because I needed it to return to Normal muffler for car inspection. I am satisfied with the Gasket which seems to be a good seal in a firm shape, but I think that it is good if it is a little cheaper because it is a thing which cannot be reused. View detail