Reviews
ZETA Zita Enduro Sucido Plate installation
It's well made and Covers the sides, so it feels secure. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250L Type LD
Protect before receiving Damage
I bought it because I want to go Off.
Installation is easy once the Bolt on the Mount is removed.
As you can see from the other reviews, the bolt was very torqued up, so I had a hard time removing it.
SRC seems to have Rubber attached where the Frame hits, but Zeta doesn't come with it. I purchased a similar one from Home center and
I pasted it, I saw in Review that SRC interferes with PowerBox, so I went with Zeta.
The Engine sound seems to reflect and is a bit noisy. I think that if there is a hole at the bottom, the sound would escape and the weight would be reduced, but I wonder if it would lower the protection power.
Instruction Manual was attached.
View detail
I installed it along with the KLX conversion.
[How is it used?
I bought this together with the KLX125 wheels when I installed them on my Ditra 125.
I think this is a must-have for Enduro.
Was the installation difficult?
It is a simple product with a small number of parts, but it requires a hang for installation.
Fix the frame at four points, but do not try to attach all four at once, but loosely attach them one at a time.
How was your experience with it?
I haven't driven it yet, but it seems to protect me well enough.
[Was there anything that disappointed you?
It would have been nice if it came with a rubber plate, etc. to put between the frame and the fixture.
If you install it as it is, the paint will surely come off.
If the paint peels off, it will rust, so measures must be taken.
View detail
Parenthesis was good.
The construction is solid. But there are 2 kinds of Bolts and 2 kinds of Spacers, so it is hard to install. The front side Bolt was too short, so I installed another Bolt appropriately. View detail
If you want to go off-road.
I purchased this for Off-Road.
If the vehicle is left in NORMAL mode, there will be an unexpected failure of the vehicle if a small stone is splashed or hits a rock, so the Hand guard and Quantity:You can buy it as a set.
It's easy to install and doesn't require any modification, etc.
There is also an OilDrain hall, so you can change the oil as it is attached, but you need to wipe it clean after changing the oil because the oil will be on this plate.
I think it will look and feel cool, so even if you don't run off-road, it's good for dress-up.
While driving, vibrations can make noise.
View detail
Fits: HONDA XR250 Baja, HONDA XR250, HONDA XR250MOTARD
Safe on forest roads
The product has high processing accuracy, and although it is not impossible to be able to pontificate with only the accessory parts, the Spacer and It would be better to add a rubber packing for a better fit
It will protect the lower part of the engine and oil line, etc. firmly, so that it can be used on the forest road It's safe
However, like the OEM Under Guard, it is not easily removable
It's a good price, but I bought it to take advantage of the Point redemption period before it became difficult to get parts
View detail
The imprint was highly rated
The texture and thickness were exactly as I expected before the installation I think it is possible to install it As for the installation, I used the rubber sheet to prevent the scratches on the frame I will View detail
Fits: SUZUKI 250SB, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI KLX250
It looks good when you paint it
Motorcycle Frame is green and I had to put another skid plate on it But I came up with the idea to use the paint for aluminum
I painted it black and installed it before installing it, and it showed a great harmony
I was able to install it with only the included Bolt!
It has a larger area than before, so the vibration of the Engine will cause a little resonance
View detail
This engine guard of ZETA is not bad
This guard plate was bought for my Honda CRF250 Crawler. Once installed, I can go to the surroundings with riders. The reason why I chose the ZETA brand is that my fellow riders have personally used it and recommended it to me. The overall effect is good, that is, the mud in the guard plate is not very clean when washing the car. The manufacturer will improve it later, I believe it will become better~ This guard is bought for my Honda CRF250 Climb Chicken. It can be played with the riders after it is installed. The reason why I chose the ZETA brand is recommended by my chicken climber. The overall effect is good, that is, the mud in the guard plate is not very clean when washing the car. The manufacturer will improve it later, I believe it will become better~(translated by Google Translator) View detail
Fits: SUZUKI 250SB, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI KLX250
I feel secure..
Just install and replace NORMAL's Under Guard. It is still easier if you have 8 mm Deep socket. Cool and have a sense of security. However, there was a delicate gap with the Frame on the Front side, and when it was pressed by hand, it hit the Frame and a sound was made, so we attached the excess sound absorption Sponge appropriately. I think I will go out for a forest road tour for the first time in several years. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250L Type LD
It's a good product - - -
It is a very good product with high precision and wide protection range, but the Installation Instruction Manual was not attached and it had to be examined by Net. As a product there are five stars but as a product - - - , I was allowed to make this evaluation. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250L Type LD
Zita Enduro Skid Plate
I think that a bit of Small stones will bounce off considerably firmly. With this, it is possible to travel in a forest road with confidence.
Unfortunately, however, since Aluminum's unique Gold native sounds are generated
Packingetc. It may be necessary to insulate with.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250L Type LD
It is sturdy!
Although it is Aluminum, it is thick and quite sturdy.
I will not do hard things like logs over but I will depend on it as an OEM so I replaced it.
Installation is simple, but there is a place to hit the Frame directly and a terrible vibration sound has come out, so we installed a door per Rubber pinched.
Of course it is okay to raise it as is in MotorcycleLift.
Speaking of the difficulty, grass seeds and fine items accumulate (Lol)
View detail
Reliable sense of wearing by car model
There is a sense of security for wearing by vehicle type. Fit feeling is good enough for wearing. Material seems to endure hard running as well. It might be easier to buy more if it is a bit cheaper. View detail
Guard perfect
OEMGuard equipped with Standard is a bit of a mind, but if you Guard it is a relief, Guard from almost the bottom is perfect. It is also possible to exchange Oil with no problem. View detail
To the forest road for a walk
Since it was worried that the stepping stones and branches would hit the forest road and the waste oil mouth of the Engine would jump out so it would break and be damaged.
I am enjoying walking along the forest road with confidence by installing it.
Occasionally, there is a sound that the stepping stones hit the steam and the skid plate, Oh, it is protected. I feel it..
Anxious points
- It does not take much time to install, but it is a little troublesome. If you can install it a little more easily.
- Engine oil It is troublesome that it becomes an obstacle at the time of replacement and needs to be removed every time.
I wish I had a hole that could discharge Oil.
View detail
Although I think that it guards firmly to a bad road run, since it has not run yet, it cannot evaluate.Although attachment is not so difficult, since a hand cannot enter easily under an Engine when attaching a Clamp, there is a little hang. Sinc
Although I think that it guards firmly to a bad road run, since it has not run yet, it cannot evaluate.Although attachment is not so difficult, since a hand cannot enter easily under an Engine when attaching a Clamp, there is a little hang.
Since he did not want to give a crack to a car-body Frame when attaching, the Rubber sheet of 1 mm thickness was stuck on the Skid plate.Although the form which also protects the portion of
Oil-drain Cap may be sufficient, since a Skid plate must also be removed at the time of an oil change, it is a little troublesome.
View detail
Although appearance and structure were large satisfaction, since it was just made too much, attachment was quite troublesome in spite of four Screws. if it does not remove at the time of oil change -- a Plate -- a waste oil ball -- If I think th
Although appearance and structure were large satisfaction, since it was just made too much, attachment was quite troublesome in spite of four Screws.
if it does not remove at the time of
oil change -- a Plate -- a waste oil ball -- If I think that it removes since that is right, but you think that it must attach once again .......
-- in a Dirt, although it is not running, defense power still seems to be high.
The after [
] engine sound echoed and it became noisy a little.
He got the jitters and there was no sound in particular.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250L Type LD
the Screw mount put in in between although attachment was writing that it was serious -- -- it was difficult. Since there was also no explanation, when it would probably be this, it attached and carried out. Although Screw mount is put in,
the Screw mount put in in between although attachment was writing that it was serious --
-- it was difficult.
Since there was also no
explanation, when it would probably be this, it attached and carried out.
Although
Screw mount is put in, the Screw was firmly serious, but
attachment was able to do somehow.
After
attachment is said to mind by good touch.
View detail
In skip Plate attachment 10 minutes, although completion, a description, etc. are not contained, they can be attached easily.The products are solid and it has satisfied them very much also in COSPAR.
In skip Plate attachment 10 minutes, although completion, a description, etc. are not contained, they can be attached easily.The
products are solid and it has satisfied them very much also in COSPAR.
View detail