Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

Enduro Skid Plate Clear all

ZETA

12 Sep 2023

Enduro Skid Plate

Fits: YAMAHA SEROW250, YAMAHA TRICKER, YAMAHA XT250X

Japanese Webike user

5/5

Sturdy and simple design.

[How is it used?
When I switched from a SEROW225W to a used and reasonably priced SEROW250 a few years ago, I purchased these parts for mountain fun.
The Under Guard, which was standard equipment in the SEROW225 era, has become an option. After comparing Y's Gear and ZETA products, we chose this product, which is simple in form and seems to be easy to fix the board gold even in the event of a dent.
Was the one you received as per Image?
It is made of thicker aluminum than expected, and its sturdy construction betrayed me in a good way.
The product was more than Image.
Was the installation difficult?
Included Bolt & Washer4Quantity:The set is simply fastened to the bolt holes originally set in the SEROW250's underframe.
Installation alone takes only a few minutes.
How was your experience with it?
The guard coverage is wide and quite strong, and although it is prone to scratches, this is not a problem because that is what Under Guard is supposed to do.
I have deformed it many times in the past, but each time I correct it by hitting it with a gold hammer.
In Other People's Reviews. The reflected sound of the Engine is Large. However, with a little effort, the reflected sound can be reduced considerably.
[Included Parts:were they on?
Under GuardBody with Bolt and Washer 4Quantity:Set included, simple and easy to understand.
[Was there anything that disappointed you?
It is not at all, and it is not as rugged and refined as those made by Y's Gear, but it is more powerful. Forest Roads & Difficult Areas Attack! It is my personal favorite design because of its feeling.
Other items that would be helpful
Point and hang of installation
As I mentioned above, I heard that the reflected sound of Engine etc. is strong, so in my case, it is sold at 100s etc. Gap Sponge tape is stretched on the inside of the guard to try to absorb reflected sound.
I installed it from the beginning when I purchased the product, so I don't know the difference before and after use, but I don't mind the reflected sound while driving, so I think it is effective. I think it is effective.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but the name of the product tells the purpose of use, and it is hard to find a product that is easier to understand than this one. It is so easy to understand that it is hard to find a better product than this.
[Notes]
If you have replaced the pipe with an external exhaust pipe, it may interfere with the pipe depending on the type, so it may be a good idea to take countermeasures after lightly assembling the pipe temporarily in advance (it is said that the POWER BOXPipe made by SP Tadao does not interfere except for the very first lot).
[ITEMS TO BUY TOGETHER
If you are concerned about reflected sound, see above. Gap Tape made by Sponge." to try it on.
[Opinions and requests to Manufacturer
I bought a used SEROW250 that didn't have an Under Guard on it." Please continue to sell as much as possible. View detail

ZETA

15 Oct 2022

Enduro Skid Plate

Fits: YAMAHA WR250R, YAMAHA WR250X

Japanese Webike user

5/5

Thick and sturdy! Even more secure!

*Motivation to purchase
When I purchased a new car, the shop optionally equipped Under Guard did not protect the entire surface of the down tube, and the down tube (especially the underside) was prone to wounds.

Installation
Remove the white plastic guard on both SIDE in front of the engine, loosen the 4 bolts of the aluminum under guard, and remove it.

0The lower side contained Spacer.

0Removal is not considered to be particularly difficult, since all that is required is to loosen the 6 Bolt.

0In my case, the installation had some Gap, and there was some more Clearance on the seat of the installation in front of the Down tube and on the ED Skid Plate.

The front of the down tube is supported by a 5mm aluminum spacer, while the lower side uses the same spacer used in the Option.

*Appearance after installation
The thickness of the plate was thick and it did not seem to dent easily as it had in the past.

The size of the guard became larger, and the area that could be protected seemed to increase.

*What I felt when I actually used it.
The area of the skid plate has been increased to cover the entire down tube, so the down tube no longer has a wound in it as it did before.

0They were running in a gare, from a large stone to a small stone, and they were very fast. Clunk!" The skid plate was bouncing back and forth with a sound. When I checked later, there was no particular sinking point, and when I removed the skid plate, it was not distorted as a whole, and there was no effect on the removal and attachment.

The Damage from the side was not guarded, so a hole was made in the hose. The Clamp is also deformed and coolant leaks out when the water temperature rises. Damage from the side is a must. View detail

ZETA

01 Aug 2021

Enduro Skid Plate

Fits: YAMAHA SEROW250, YAMAHA TRICKER, YAMAHA XT250X

Japanese Webike user

5/5

It's a great tool to have when exploring forest roads and playing in the mountains. "You protect the underside of Motorcycle." It is

[How is it used?
When I was 225, Guard was Standard Equipment, but when I got 250, it became Option...
I bought this because I need it to play in the woods and mountains.
Was the one you received as per Image?
When I purchased Under Guard, I took into consideration my own usage situation since it was released by several companies.
Personally "You go to the mountains to fall." For me, I think that "I want you to protect the sides as much as possible, not just the underside." In the end, I hesitated between YamahaOEM and ZETA because I thought, but I decided to make ZETA, which was cheaper than Webike at the time of purchase, Image was as it seemed to be sturdy.
Was the installation difficult?
There is a screw hole for installation on the SEROW Under frame itself, so just fit it there and tighten it with the included bolt.
How was your experience with it?
It is also thick and very durable, and the simple shape of the martial arts, so some scratches and dents are "We're on the off-road. I think it's a good feeling.
Webike's revue. "The echoes are too loud. I put Sponge tape on it as shown in the picture because it was stated that it was a good idea to do so, and because of that, the echo sound is not bothering me.
[Included Parts:were they on?
The packaging was simple, just the body and 4 bolts for installation. "I want to put Under Guard on my Serow 250." When
If you bought it thinking, you can install it without any problem.
[Was there anything that disappointed you?
Simple and sturdy, and because of its simple shape, it can be easily deformed and tapped out from the reverse side (I have deformed it many times...)
Other items that would be helpful
Point and hang of installation
Do not tighten the bolts one at a time, but install all four bolts by hand and then tighten them evenly, etc. "Gap and screw holes don't fit!" You can prevent troubles like this. I don't think there is any problem.
[Availability and clarity of the Instruction Manual
The shape of the product itself is easy to understand and the installation position is "It's the only place!" I don't think it's a problem.
[Notes, Items to be purchased together].
Please note that there is a separate MODEL that is compatible with the 2018 and later Canister models, so please do not make a mistake when purchasing.
If you're worried about echoing sounds, you might want to buy Sponge tape, I've got some at Da0so. "Tape for doorways." purchased
[Opinions and requests to Manufacturer
The SEROW250 is no longer for sale, but please keep it in your Lineups for as long as possible. View detail