Reviews
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA MT-25
Isn't that good?
Installation is very easy, and the pictures in the Instruction Manual are easy to understand.
2017 MT-03. delivered last week and went for a quick run to break in the car, but it got muddy.
It looks like the previous owner went with a Fender Eliminator, but I didn't notice it when I bought it, because all I cared about was Engine and Position.
I haven't ridden on it yet after installation so I don't know how well it works, but I like the way it looks.
I think the price is too high, as I've seen in other people's impressions.
View detail
Refreshing appearance and no dirt on the suspension.
I purchased this product because I was concerned about dirt on the suspension for driving in the rain.
When installing the bracket, it is recommended that the fixed bracket be attached to the fender first because there are parts where it is difficult to tighten the screws if the installation is done in accordance with the order in the Instruction Manual.
Brake hose cannot be fixed in the same way as NORMAL.
A little ingenuity is required to fix it properly.
It looks tighter and better looking.
The sass stains are gone.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA MT-25
Practicality and Looks UP
The Fender Eliminator Kit was installed when I purchased it used.
When I rode in the rain, the dirt under the seat was so bad that I had to clean it off every time.
After installation, it is almost dirt-free.
Installation was also easy after reading the Instruction Manual.
I am also satisfied with the look and feel of the Rear wheel area.
I thought it was a little high.
View detail
Fits: BMW R nineT, BMW R nineT RACER, BMW R nineT PURE, BMW R nineT URBAN G/S
It looks pretty good.
I bought this one because it doesn't have an inner fender and I thought it would get dirty when it ran.
Motorcycle purchase store recommended me to buy this one. I am satisfied with the quality and appearance of Large.
I haven't been able to see the effect on driving yet, but I'm quite happy with the results.
View detail
Material:Carbon Style is Race ish.
I have this Rear Fender on my ZX-6R (2012) which is used only for Circuit driving. At the time I bought it. ZX-6R The Emblem of the "M" was processed three-dimensionally, but the shape of the current model has also been model changed.:Carbon Style is also more [Color] The shape has become more three-dimensional, and the Rear has become clearer. The shape has also become more three-dimensional, and the Rear ZX" Parenthesis is also good. View detail
(It is not impression.) since the connection method was not known, I had you let it use this column -- it is the field engineer who did the impression contribution of the > impression person-in-charge Mr. point to the goods. Although it thought th
(It is not impression.)
since the connection method was not known, I had you let it use this column -- it is the field engineer who did the impression contribution of the > impression person-in-charge Mr. point to the goods.
Although it thought that two or more photographs could contribute and the text was written, there is a part where only one sheet is made to correct the text to in part since like.
-- It is unclear.
a photograph -- like -- of a muffler and a tool -- photograph -- like -- -- please delete.
View detail
Fits: BMW R nineT, BMW R nineT RACER, BMW R nineT PURE, BMW R nineT URBAN G/S
Jack-up is required
I bought a genuine product, although there are Chinese products on Amazon and other sites for half the price. It is a solid product, and although I did not compare it to the Chinese product, there is probably a difference in material, rigidity, and surface treatment.
The Washer and other parts listed in the Instruction Manual were not included. I had them on hand, so it wasn't a problem, but for a product of this price, not being able to find the parts listed in the Instruction Manual is a bit of a problem. I've deducted one star regardless of how complete it looks.
The instruction manual says it's easy to just pull the bolt out and install it, but in reality you have to jack-up the pivot part of the Swing Arm. If you don't do this, the thickest bolt will not come out, and even if it does, you won't be able to put it back in.
View detail
Fits: SUZUKI V-STROM 650, SUZUKI V-STROM 650 A, SUZUKI V-STROM 650 XT
be torn
I installed it, and it was good parenthesis in the carbon style, but at the point when I ran about 5,000 miles, it cracked about 5cm between the Fender part and the Chain case part. View detail
Parenthesis is good!
GSX-R1000R doesn't have Inner fender of Rear.
There are a lot of Inner fenders on the market, but the best thing about Puch's Inner fender is that it can be installed with Bolt On!
Inner fender of Puch is Chain Cover and Quantity:It's a Set!
The Chain Cover is tightened together with the Chain Cover, but it was a little difficult to remove and install the Chain Cover!
Overall, I'm satisfied with the Large variant.
View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA Integra 700
The rear fender is essential
My car is made by Honda, the model is NC750X, and the year is October 2020. I bought Puig’s rear fender on webike. Its material is plastic; the chain guide box of the original car must be removed when installing it; it cannot ride too fast, otherwise it will still be thrown on the leg; Puig’s rear The fenders are still a bit expensive, especially 300 yuan tax at the customs, the cost is a bit high ------------------------------ ---------------- My car is Honda brand, model is NC750X, the year is October 2020. I buy on the rear fender commodity webike Puig, whose material is plastic; when installed original car should guide chain box demolished; can not ride too fast, otherwise it will still throw the legs; after the Puig fender or some small expensive, especially in the customs duty was also $ 300, the cost of a little big Powered by Google Translator View detail
A little more expensive, but looks better than OEM.
It's written like it's for the PC40, but I was able to use it on the PC37 as well, I think it would have been better if it had the look of Carbon, so I'm also including the 4.
Unlike the round OEM, the back part of this product has a more sporty look to it, which makes it more comfortable to recommend.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA MT-25
We can pimp it out
Clearance with Tire is not too large
The Fender itself is a smallish thing
The Fender isn't overly assertive, it's just right!
Installation is the same as OEM, 2 locations + 1 location for brake hose
It is fixed in three places to prevent rattling
It's a bit expensive, perhaps because of the imports, but if you like the shape of this one
I don't think it's a bad idea to buy it
View detail
The product itself is a yes
I asked for a Luster Type, but I received a Luster Eraser Type The product itself is very nice I like Parenthesis. 200/55 and 200/60 because the width is wider on top than OEM You can even wear them until the end It's just... they send you a different type of product, as expected of Webike View detail
Fits: SUZUKI BANDIT1250, SUZUKI BANDIT1250S, SUZUKI BANDIT1250F
To prevent staining of sass
Purchased to prevent the hard-to-clean rear suspension from getting dirty
The material is made of plastic, which is often seen in OEMs, and is not so thick, so it is soft to the touch It feels cheap
But the system of processing is so high that it doesn't feel cheap just by looking at it
There's plenty of room between the Tire and the gap and it doesn't seem to be interfered with by the Tire brand
Color:I bought the Unpainted one and it has the texture of an OEM product, for better or worse
However, considering the Material, I think the price is high
View detail
Fits: KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled)
I'm happy with the way it looks
The bottom of the scuzzy Seat is Dress-up because it has been Fender Eliminatorized I think we could have done it
I don't know much about it, although it seems to have some heat retention properties and so on ^^^;
The installation was done by a motorcycle shop for various reasons
View detail
There is a crack between Body and Bracket in 10,000 KM running!
There is a crack between Body and Bracket that can run 10000 KM and it got worse and worse.. Repair with universal adhesive material but running 500 KM, cracking occurred, quality accuracy too bad. View detail
Fits: SUZUKI V-STROM 650, SUZUKI V-STROM 650 A, SUZUKI V-STROM 650 XT
Mud relieves
I also do forest road touring with V-Strom 650 XTL 7 but I bought it because mud hone was concerned.
Since only English sentences are included in the manual, we decided to install it while imagining the installation.
You will fix the Fender with the Swing ArmScrew hole and the Chain GuardScrew hole under the ABSControl Unit and the BRKT attached to the Arm on the Rear brake hose side.
View detail
Fits: BMW R nineT, BMW R nineT RACER, BMW R nineT PURE, BMW R nineT URBAN G/S
Installation is ...
STANDetc. Because it seemed impossible without it, we asked Dealer to install.
The wages were slightly higher due to bringing in goods, but as expected, it seemed that it was unavailable as long as it was in a state with a slight Tension applied, so it was a correct answer.
If you do not have confidence, I feel like I'd better ask you to order from installation to installation.
The texture is good, the mounting accuracy is high, I think the strength is enough. We have not run rainy yet, but it seems to be active on rainy and wet roads with a good feeling.
View detail
Easy detachment without removing suspension. It is outstanding Fit feeling to doubt that it is an OEM.
In the product selection, it is described as Carbon, I thought it was clearly Carbon Material : It was Plastic. So I think that this price is honest high, but I definitely do not like Carbon until Chain Cover and I think that it is meaningless to drop maintenance with the Naked model, so there were no other options. View detail
Rear suspension No stains around
I purchased CBF because Rear Fender is not attached. However, Screw can not be completely closed as installation is slightly larger than I expected, and Chain side mounting part is slightly different from Standard Chain case. Since there is no rattling for the time being, I think whether there is a problem.
Tire and Rear Fender have only a few skims.
For installation, remove Left Sidefootpeg, remove Right Side Exhaust System, remove fixed part of Rear brake hose, shift Hose and attach Bracket.
View detail