Reviews
I don't think you'll notice the effect on city driving...
I don't know if I increased the horsepower or not. The intake sound is a little larger than before. It took some time to remove the cowl, but it was no problem. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Normal.
Trickster's Air ductGuard is not much different from NORMAL when installed.
It is not noticeable because it is in the Duct section. But I am self-satisfied.
View detail
provides more cooling
I installed the part on my XJR 1300 Bj 2000, so it fits. it should provide more cooling. It does (minimally), but you shouldn't expect miracles from it. I ordered the unpainted version. I think the price for the painted version is too expensive. -------------------------------------------------- -------- I installed the part on my XJR 1300 BJ 2000, it fits too. It should ensure more cooling. It also does it (minimal), but miracles should not be expected. I ordered the unpainted version. I find the price for the painted version too expensive. View detail
Purchased in conjunction with IntakeDuct replacement
Purchased with the introduction of PowerIntakeDuct.
Attach to the inside of the Front cowl with Double-sided Tape.
Slightly misaligned, interfering with Cowl...
I fine-tuned the Double-sided Tape to be thicker.
If anything, Color:It is a Gray color and stands out more than OEM, but the texture is good and I am satisfied.
View detail
Increased air intake efficiency
The diameter of the outlet and the connection to the cleaner box is clearly wider than the OEM. I can visibly feel that this will increase the intake airflow….
The installation itself wasn't that difficult, but you do need to remove the Front Cowl as well.
If you don't install it at a good angle, the intake port of the front cowl (Inside) and Duct's mouth interfered.
I referred to youtube videos and other sources, but I don't think anyone specifically mentioned interference, so it could be individual differences or …wrong installation……
The intake sound is much louder and more powerful. It is a good sound. I love it.
It also feels like it has more power blowing up to ~10000 RPM. In general, I am satisfied with Large.
Now I need to replace the Funnel and Filter to complete the intake system.
View detail
Fits: KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX
Switch to Carbon!
Change to Carbon duct.
I don't know if it's just my imagination or if the intake sound is a little bit larger or if it's resonating in the duct, but…
At any rate, it became a low sound echoing with the sound of the Exhaust System.
And then there's the look.
The price was also the best, although this was not so cool and the pattern of Carbon twill shibori was beautiful and my favorite.
The installation was a little tricky, but I was able to do it without any modification.
View detail
It's not even close.
It is not Level that can be shaved a little. Only the outside is left after grinding and grinding.
The inside is completely rebuilt.
Not for amateurs.
I'm going to reapply FRP because it's necessary for performance.
If it's just Parenthesis, don't ever buy it!
View detail
Products with distorted shapes
After I opened the package, it said it was a hexagonal aluminum mesh, but the way it was cut was messy. It's not hexagonal. Is it defective?
If it's this large, it's better to buy aluminum mesh at Home center.
View detail
Increased horsepower is very attractive, isn't it?
The volume seems to have increased a little.
I'm not Racer, so I don't know the rest.
I don't have a Rapid and my exhaust system is AXIS labs...
View detail
It's a must for PowerIntakeDuct.
It is indispensable because it is a governor after installing PowerIntakeDuct without this. View detail
There is an experience in combination
I used it in combination with rapid bike easy, and it gave me the guts from over 10000 and the largeness to allow me to start second gear.
The balance between the sound and the acceleration seems to be getting better.
If you remove the sub chamber of the NORMAL Intake Duct and cut the aperture part that connects to the air cleaner, you can get the same effect as this part. I'd like to try it in my spare time because the OEM one is much better.
View detail
Image is too much.
I bought it thinking it was the Core guard in the picture!
I looked closely and saw that it said Air duct.
I feel bad that I didn't check it better myself.
Couldn't you have just posted a normal Air ductGuard picture?
I've been using Webig a lot.
I was able to suspend my disbelief a bit.
View detail
It's very windy.
I don't feel any change when I put it on. Just the appearance of Parenthesis is good. The sound of the wind is heard from the engine part when it is running, so the cylinder head seems to cool down firmly. It is Large parts for air cooling. 。 View detail
A little frustrated
I was convinced that it would take longer to deliver because of the made-to-order nature of the product, but the + 1 week response was late
After delivery, I checked the product and found that the bottom part of the product had become cloudy and white
View detail
best fitment ever
good looking . direct fit . no modification needed,the most important is made in japan,best quality on the market. we trust Japanese made product . View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Pure, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT /5
Screw interferes
Screw for fixing sticks to the outer edge of the intake entrance, so the exterior interferes and it feels like it can not be installed as the original.
I feel that it looks bad.
View detail
It looks better......
2017 ZX-14R H. Attached to G.
Although a Custom feeling may appear in appearance, it is subtle to say whether the product is for the price.
The installation precision is also bad, and also in the Instruction Manual "Attach to the place to be comfortable..... It is stated in the expression "bae pa LePera itself. There is Screw attached to attachment, but I do not want to open a hole, so it is not translated exactly with the car body so we installed Double-sided Tape with double sticking. Working time 2 minutes.
Cost may be high in small production but price may be a little cheaper.
View detail
It looks good.
I bought it as if I could blow air efficiently even a little. As for installation, since it was changed to Oil cooler of Other Company Product, it became a slightly different mounting method from the manual, but it was able to install without problems. Material : Titanium makes it thin and has good texture. I feel that split feeling high, but I think that it is functional product if it is a functional product. Of course there is no complaint. View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA BWS125(BWS)
To BWS 125 SEA 6 J
At first I was looking for Fan cover, but there are many things that clearly fit or not written
I was procrastinating.
I accidentally found this item and it seems to be OK so I bought it.
Very Parenthesis is good.
We also exchanged Lightweight Cooling Fan together.
View detail
Expectation of the effect of summer performance!
Although I thought that the effect was good for the price, buy it because it looks cool.
Mounting is easy. It's about 5 minutes by BoltON.
Actually installed and felt...
We ran in the middle of the day when the temperature was high in July.
I noticed running, but surely a hot wind will come to the inner part than before!
Is that - - - (Lol)
The effect seems to be!
Although it looks more noticeable than it seems, you may only know who is on the same model car (Lol)
I think that Titanium color VERSION should be good because expectation is Titanium of the corner.
View detail