Reviews
So stylish!
It was deteriorated by ultraviolet rays and other factors, so it was replaced.
The White Tank that originally came with it lasted over 10 years.
This is a purchase for a change of mood.
View detail
Mount expansion foundation with no gap required
[How is it used?
Used on the Clutch Side of CBR250RR (MC51) from April 11, 2020 to October 2, 2023.
Mount the iPhone miniSeries using the following parts
1.RAM MOUNTS BallMount M10xP1.25:https://www.webike.net/sd/24021956/
2.RAM MOUNTS Short arm:https://www.webike.net/sd/21313052/
3.RAM MOUNTS XGrip (M) Smartphone Holder (maybe):https://www.webike.net/sd/22558592/
4.Large amount of Screw Lock agent
Was the one you received as per Image?
The product is exactly as shown in the image.
Was the installation difficult?
I forgot to measure the distance between Bolt.
BoltQuantity:I guess it's easy enough to remove and replace the 2pcs and install. Since I feel there is a gap at the bottom, it may need to be filled with Washer or something.
How was your experience with it?
The Smartphone Mount is a good choice because it requires far fewer unnecessary parts than a dedicated bar.
Since it is installed by replacing the original parts, there is no need to consider the gap between handlebars, etc., unlike retrofit Mirror Holderet etc. The original bolt can also be used.
Smartphone mounting is possible with far fewer wasted parts than with dedicated mount bars, etc.
After mounting the ball on the car body, I shook it with the ball, and the car body shook, so it seems to be robust.
I don't remember how many times I actually ran with my phone on it.
Riding the phone on the Clutch (Left) side rather than on the Brake (Right) side met the request because I prefer the LeftMount for the possibility that the phone could escape to a non-roadway in case of an emergency.
[Included Parts:were they on?
Included Parts:None, only this product wrapped in Vinyl
[Was there anything that disappointed you?
I think I used a similar part from YAMAHA for the R6 Brake because of the similarity.
YAMAHA 5YU-26393-00:https://www.webike.net/sd/25729937/
That one did not occur when the gap was R6.
[Notes]
This product Mirror Holder It is used like the CF POSH Universal mirror holder (https://www.webike.net/sd/1125900/), but it does not say anywhere that it is for smartphone mount.
View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
long vowel mark (usually only used in katakana) (>ω<;)
Converted to my son's BALIUSA5, which had an air leak from the MASTER.
I thought about installing the Radial master, but I decided to go with the ZrX1200 DAEG because it is expected to be replaced by the ZrX1200 DAEG next year, so I decided to go with this one for cosmetic reasons.
Tank Separated Type is good for a different atmosphere. (? ・ ・?)
For the price, Touch was fine and a good buy!
However, it may be a little long for Mr. Balius in the standard lever….
It was sticking out of the handlebar, so I replaced it with a short lever. (Polish)
I should have measured the length before purchasing and selected the short lever type lol.
View detail
Fits: KAWASAKI Z1000 (water-cooled), Others , YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP
Inexpensive and easy to handle
Inexpensive and easy to handle. It is a Control property for the amount of grip. View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
Article of good quality
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliable View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
Great!
Replaced an OEM Master Cylinder with a BALIUSA5 that developed an air leak.
The color is Black×Black.
I was relieved to find that the front brake, which does not bite the air, was properly connected to the Snap. (? ・ ・?)
The only problem I have with this vehicle is ….
The tank is placed too close to the HandlebarCenter and may be covered by the Tachometer.
Well, I can just buy a Bracket at Home center and move it to a new location, lol.
I have a shabby blog, if you are interested! (^_^;)
https://enjoy-motorcycle.blog.jp/
View detail
Fits: KAWASAKI Z1000 (water-cooled), Others , YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP
NISSIN Radipon
Motorcycle history of over 20 years, first radipon.
Brake was so easy to use that I regretted not using it sooner.
View detail
A helping hand after being in trouble
I replaced the Rear brake reserve tank. I replaced the hose at the same time, but the connector from the rear brake master cylinder was a Straight Type, which made it very tight to handle. The angle of the hose was changed to shorten the overall length and simplify the oil line, It also refreshed the look. It was a great help. View detail
Fits: その他
STREET TRIPLEr (675) Used for
The Switch was not working well and I first disassembled it to fix it, but it was still too delicate to leave pry marks, so I ended up buying a new one.
It's not that expensive, so we should honestly buy new parts that we can get.
View detail
Custom Brake Circuit
It was decided to change the Back Mirror and shift the reserver tank, and to consider a custom aluminum reserver tank.
I couldn't find a good one, so I put on a small for clutch for the time being, and it was surprisingly clean.
The interference with the mirror was handled well, and although it is a Universal Product, it feels like a custom job.
You have to be careful with the amount of Brake fluid though.
View detail
Fits: YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J)
Used in BirdCity155
I used it on a BirdCity155 (2023 model) Rear brake master. This Horizontal Type 11mm seems to be just right.
The banjo extraction position is not much different from that of the OEM, so the OEMHose can be used as is.
I am not aware of this because I replaced the Front master as well, but if you replace only the Rear master, you need to work on the interlocking Brake.
*If removed, the front brake will fail.
I had to cut it off a little because it interferes with the Handlebar Cover.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZZR1400 (ZX-14), SUZUKI GSX-R750, Others
For Single caliper
I installed it on a BirdCity 155 (2023) and it is very loose. I think it is for single caliper because it seems to grip in.
Since it uses a mechanical switch, it is durable (many MASTERs from overseas manufacturers are pressure-sensitive and less durable).
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZZR1400 (ZX-14), SUZUKI GSX-R750, Others
Stroke deepens.
As I posted the other day, it was originally a horizontal 5/8.
Manufacturer recommendation was 19mm, but I actually put on 19
It is possible to grip more lightly and control by the amount of Stroke.
17mm, isn't it?
I bought it separately and replaced it with a new one.
If you grip it all the way down, you can bring it to full lock,
It is possible to control the effect by the amount of grip, not by the force,
This was the best choice for my riding style.
View detail
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
Also for Restore of older vehicles.
[How is it used?
I acquired this product as part of the Restore process when I reached middle age, having acquired the vehicle of my dreams that I was unable to obtain during my Blue Spring days, "Run" "Bend" "Stop" The most important of the "Stop" Focusing on NISSIN for Peace of Mind In
Was the one you received as per Image?
It was the equipment that was equipped with Large body on the vehicle that I admired in the Racer replica era from the late 1980's. It was a product just like Image, and I am thankful for the age when we can easily purchase products with higher performance than those days at Motorcycle accessory stores and Webike.
How did it compare to other products?
The comparison was a longing for those of our generation. "Brembo" When YamahaOEM Product It was
Since then, brembo products have become easier to obtain and there is a wider selection of brembo products compared to Nisshin products. Very expensive."
And OEM Product, when I was allowed to test drive a friend's vehicle at that time. It doesn't work very well." I also have a feeling that it would be better to stick with the OEM, which I have always felt was the best way to go. And, above all, it is impossible to get new parts for the 1987 Motorcycle because the manufacturer has stopped selling them.
It's not that we don't have overhaul kits, but it's just not worth the time, effort, and money for something that doesn't work as well as it should...
in the manner of Works great." Affordable prices." Brand for Peace of Mind." The Nisshin brand is the best choice.
[Points to note]
Please check the compatibility with the Brake Caliper and the standard before purchasing.
When installing, be sure to connect and bleed the brake fluid properly, and be sure to install and maintain the brake troublemaker properly, as it can kill you and others.
[Included Parts:were they on?
All images attached on Webike's Site.
[Was there anything that disappointed you?
Nothing at all, so much so that I don't think it should be compared to the OEM time with Caliper. It works as well as it should." They will give it to you, and you will never go back to NORMAL again.
0Other items that may be useful include
Point and hang of installation
Both point and hang. We make sure each task is done right." It is important to
After temporarily assembling this product in the handlebar and aligning the position balance with the lever on the clutch side, firmly install the brake hose and brake caliper to prevent leakage, and be sure to bleed air from the brake fluid.
[ITEMS TO BUY TOGETHER
Let's replace the Brake hose, Caliper, and Pad.
Even if it is a Large kesa, at the very least, you should have new Brake fluid and hose connection washertc.
[Opinions and requests to Manufacturer
More and more people are restoring various old cars on SNS and YouTubeetc. video sites.
I have a feeling that demand will continue to increase in the coming years, and I look forward to the continuation of Lineup for many years to come.
View detail
Lever
It is just the right length for MONKEYetc. mopeds! View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Installed on SKYWAVE250 burgman (CJ43A)
The front master cylinder is deteriorating and I bought it instead of OH.
It has bolt holes for mirrors (with Reserver tank), so it may not be suitable for Cowl mirror cars.
It is more like an OEMSpec. ready-made product sold in Rose than aftermarket parts, and the prices are reasonable.
It is made by NISSIN, a trusted manufacturer, so people who do not want to use cheap Chinese products can rest assured.
Since it is basically an OEMSpec, there is no difference in feel between NORMAL and LARGE, and it is a kind of dress-up parts, but it comes with an adjust lever as a byproduct.
View detail
Bracket
The no-frills Bracket. Yes, it's a Bracket. View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
MASTER change for DIO-ZX
Around the Front of DIO-ZX on AF24TACT
MASTER here while swapping.
Version up to Cylinder.
I don't know how to Brake in NORMAL condition.
Comparison of BrakeControl and effectiveness
I can't do it, but it looks like Race ish.
I like it very much
Air bleed is a pain in the ass when it comes to installation.
It's not particularly difficult, but it's about as difficult as it gets.
Cowl must be cut to fit on AF24TACT.
It cannot be installed.
View detail
Fits: KAWASAKI Z1000 (water-cooled), YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP, Others
Very Controllable
Used on SV650X.
Since the OEM has a horizontal 5/8, the fit is 19mm, so it was installed.
I wanted to use the OEM Brake hose, so I bit on the Offset adapter.
The Hose could be installed without any difficulty at all, and the difficulty level of the work was at the beginner's level.
Brake switch is also changed from OEMNisshin to Radial masterNisshin,
Installed without tampering anywhere.
Air bleeding, which I had heard was time-consuming, was completed in 3 minutes because of the Breeder on the MASTER side.
As far as the ride goes, I was quite torn between this and the 17mm before I bought it,
As a result, I have a slight regret that I should have gone with 17mm.
Everyone will have their own preferences, but the reason I want to put on Radial master is,
Because I want to control Brake by the amount of grip, not Breaking by force,
Stroke wants to take plenty.
At 19mm, it was tighter than I expected, and I would prefer to be able to grip it a little more.
However, it is still quite different from OEM horizontal placement.
It is very easy to bed in while leaving a small amount of front brake.
I will buy a 17mm one of these days and give it a try.
View detail
Fits: Others
Size of Circlip was different
The size of the Circlip was different and the included items could not be used.
I was going to use this Repair kit to make everything new, but alas.
Circlip reused the previous ones.
I think quality control during shipping is inadequate.
I have already assembled it and do not wish to return or exchange it.
View detail