Reviews
I like it because it looks like Mr. Battle.
Short Type.
I am a wait-and-see motorcyclist, and I chose the short length in order to limit damage in the event of a fall.
I like Battle's products because they are generally suitable value with Stages.
Note that it is more difficult to use than Long Type for private use.
View detail
Material:Plastic is sufficient.
With Gold, you will be disappointed when scratches appear while using the product.
Material:I like Plastic because it doesn't show any crumbs and is very simple.
View detail
Acts as a Guard. Fade resistant
It is a Stand Hook of a fairly Large size.
The color purchased is Gold; it is a somewhat bright Gold color as shown in the product image and has not faded in the 4 years I have had it on. The weather resistance is quite high.
It functions well as a Stand Hook, and the large size makes it easy to hang.
It also functions as a guard in the event of a fall. In fact, it also works as a guard in the event of a large fall, and a large down type exhaust system was able to survive with only a small scratch.
I was afraid that the Swing Arm side of the support would bend, but the material itself is soft and the large size makes it firm and secure. "Spinning away." The Swing Arm side did not bend.
I used to use MORIWAKI's product, but the catch on the Swing Arm side bent even after a light fall (after that, I replaced the Swing Arm and started using this product).
I can recommend it because it stands out rather prominently due to its large size and color, and it is inexpensive as well.
View detail
They Do Offer a Much More Stable Platform to Work on the Monkey 125
About quality and texture: I am happy with the quality of the suspension spools from G-Craft. The spool is made up of two parts that are secured together with the included fastener. The material used is aluminium with the black surface being anodized and the silver surface being a raw finish. About the feeling of use: I find these spools a useful addition when working on the Monkey 125 from cleaning and lubricating the chain to stabilizing the rear end to allow the front end to be lifted to remove the front wheel. Products to buy together: Some lifting hooks for your rear servicing stand would also be desirable to purchase alongside the suspension spools. Difficulty of installation: The process to install takes about 10 minutes. Remove the OEM Honda rear shock nut and install and torque down the silver part of the spool and then install align and tighten the black part with the included fastener. Repeat the process for the other side. Not difficult to do. Cost performance and comparison with other products: High costing but you are getting quality materials and finishes with this product at a higher price as compared to the stainless steel option available on Webike and the even cheaper quality option available elsewhere. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: You may think these suspension spools are not neccessary but they do offer a much more stable platform to work on the Monkey 125 then just using the platforms on the rear servicing stand. View detail
Dress-up
Using Lift jack is now much easier.
The installation was a bit tricky, as the angle of the fixing spacer needed to be adjusted when tightening the bolt.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
STANDBracket
DesignSimple, One point, and the letters YOSHIMURA are good.
It is easy to install and works well with V-Uke.
It is not listed in the compatible car models.
It went on the ZX-25R with no problems.
Recommended
View detail
As Axle Slider
As Axle Slider,
I purchased it in the hope that I could use it as a Stand Hook.
It is strictly as Stand Hook.
Maybe JTrip's Hook receiver would work.
It is not easy to find a receptacle of this size, and Rear
There is no point in using it around.
It looks good, it will be One point.
View detail
Fits: HONDA , DUCATI , KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI ZX-10R, KAWASAKI ZX-6R, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR
Stand hook slider
The maintenance stand is J-TRIP's V-receiver. View detail
![Swingarm Spool (Stand Hook) (Off-set Type)[Cotton Reels (Offset)]](https://img.webike-cdn.net/catalogue/images/50737/22636551_1_TS.jpg)
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
Genuine R&G Cotton Reels for 09 Fireblade
There were a couple of other parts that I wanted to get for project track bike which will help protect the bike if there is any accident. These are what I decided to get and the added bonus is that not only will they protect the swingarm but you use them to lift the rear wheel with a paddock stand. Dual purpose which is brilliant.I found the correct part numbers by checking R&G website and adding the model of bike. Very pelased to see that Webike also stock them, so purchased them from here instead.The price is roughly what I could get them for locally but I can count of Webike delivering my items on time and without a hitch. The outer box was sealed and the littel bit of empty space inside the box was filled with buble wrap. All my parts, even the samller ones arrived in perfect condition. The cotton reels came in their own box which was nice and touch so there would be no damage. They have a really smoothed out thread on the bolts which went in smoothly, not notchy or sharp edged. They attach to the mounting points on the swingarm with no issue. The cotton reels themselves are made from a special nylon I believe, don't quote me on that though but they are very similar to the others I have purchased. I tried them with my standard paddock stand and they are a perfect fit, no wobble like some other cotton reels so a very good product all around. Very pleased with the result. Thank you Webike for your hard work. View detail
Racing Stand Hook
Reason for purchase
Since GOOSE does not have a center stand, I bought a very inexpensive racing stand and worked without a hook, using the rear swing arm to support the stand. It is not impossible, but it is easy to gap and may damage the Swing Arm.
For work efficiency, we decided that it would be better to add a Stand Hook and purchased it.
Although there are a variety of Material:I chose Plastic because I thought I would not have to worry about scuff marks. I also thought the price was reasonable.
【attachment】
The original Screw hole Cap was removed and the Screw hole was grimly and thoroughly cleaned to make sure the supplied Bolt would fit Smoothly before installation.
【Impressions】
I have not used other Stand Hooks of this type, so I can't compare, but I think it is something like this. I think it is not bad.
View detail
CrabHook
I used it with Jay Trip's Endurance Hook and was able to secure it without any rattles.
As mentioned in other reviews, Bolt looked very cheap in Uniqlo!
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
Mounted on R1000
Simple and Parenthesis is good. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR, DUCATI , HONDA , KAWASAKI Z800, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR
The finish looks good.
I am satisfied with the look and feel of the product. View detail
![Swingarm Spool (Stand Hook)[Cotton Reels]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0150/3235388_1_TS.jpg)
Fits: YAMAHA FZ1, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-10, YAMAHA MT-09, DUCATI Monster 821, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA XSR900, YAMAHA YZF-R1, APRILIA Shiver 750
Genuine R&G Cotton Reels for MT09
There were a couple of other parts that I wanted to get for my wife's MT09 which will help protect the bike if there is any accident. These are what I decided to get and the added bonus os that not only will they protect the swingarm but you use them to lift the rear wheel with a paddock stand. Dual purpose which is brilliant. I found the correct part numbers by checking R&G website and adding the model of bike. Very pelased to see that Webike also stock them, so purchased them from here instead. The price is roughly what I could get them for locally but I can count of Webike delivering my items on time and without a hitch. The shipping method I chose this time was EMS fast service. It was a very good price as I also had a few other parts in my basket and this cut the shipping down than just buying one or two parts. Everything arrived with me in 5 days. The outer box was sealed and the littel bit of empty space inside the box was filled with buble wrap. All my parts, even the samller ones arrived in perfect condition. The cotton reels came in their own box which was nice and touch so there would be no damage. They have a really smoothed out thread on the bolts which went in smoothly, not notchy or sharp edged. They attach to the mounting points on the swingarm with no issue. The cotton reels themselves are made from a special nylon I believe, don't quote me on that though but they are very similar to the others I have purchased. I tried them with my standard paddock stand and they are a perfect fit, no wobble like some other cotton reels so a very good product all around. Very pleased with the result. Thank you Webike for your hard work. View detail
Fits: YAMAHA , TRIUMPH DAYTONA675, DUCATI Panigale 899., DUCATI MONSTER S2821, APRILIA RSV1000 Series, APRILIA RS250, APRILIA RS125, APRILIA SL750
Works well with J-TRIP's STAND
[How is it used?
Used in conjunction with the company's Rear stand in Circuit
Was the one you received as per Image?
Yes
Was the installation difficult?
It is very easy to attach to the OEM Swing Arm by simply attaching it to the original Screw Mount with the included Bolt.
How was your experience with it?
There is no problem at all for the purpose of use. I installed White because I thought Black would stand out because the Swing Arm is Silver. I think it goes well with J-TRIP's Rear Stand.
[Included Parts:were they on?
Bolt and Washer required for installation
[Was there anything that disappointed you?
Nothing in particular, but a little cheaper would be better.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
There are no particular installation points, but be careful not to overtighten the bolt because the side to which it is attached is aluminum and the bolt is steel.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
For Maintenance
Purchased for maintenance
Only YOSHIMURA has a sense of luxury.
I chose Gold because the work area is not dark enough.
I plan to remove it while driving.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
cheap
Cheap and this quality can be scratched with confidence.
It hangs a Y-shaped Hook and gets scratched, but that's the way it was in the first place.
I think cheap is justice, and this price is reasonable for MORIWAKI.
View detail
Fits: KTM 950SUPERMOTO, KTM 990ADVENTURE, KTM 990SUPER DUKE R, KTM 990SUPER DUKE, KTM 990 SUPERMOTO, KTM 690SUPERMOTO, KTM 690SMC R, KTM 690SMC, KTM 690DUKE, KTM 690ENDURO, KTM 200DUKE, KTM 390DUKE
I saw that it was for car models only.
You can't use it, so all you can do is complain! With rising prices, Cup noodles are also increasing in price.
What a waste! I'm going to eat an ear of bread for a while!
View detail
It wasn't necessary.
Purchased to raise the rear wheel when cleaning the chain, etc., as there is only a side stand.
I attached it, but I only needed the L-Type Adapter that came with the Rear stand.
Well, it looks good, and I'll leave it on.
View detail
Fits: SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSX-S1000, SUZUKI SV650 ABS, SUZUKI GSX-8S, DUCATI 999, DUCATI 999S, KAWASAKI ZX-10R, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R HAYABUSA, SUZUKI SV650X, SUZUKI GSR750
Texture Psycho
Purchased for use with Maintenance Stand.
I chose YOSHIMURA because I thought it would be the best choice among various manufacturers.
Installation is not particularly difficult, as all that is required is to tighten the Bolt.
The colored aluminum part is fixed and the black resin part rotates round and round, so it seems to be less prone to scratches, and it may be lighter because it reduces resistance when the STAND is hung or removed.
I am not sure about the durability of the product yet, but as it stands now, I am satisfied with the Large change.
View detail