Reviews
Diversion to CB250F
I installed a ZETA handlebar on my MC43, and it was about 30mm higher, but the OEM tension was too tight, so I replaced it with a ZETA handlebar. 1 pc of pull was applied to the handlebar, and the direct feel was increased by adjusting the play and the handle.:Pair (for Left and Right) I let it have play at full lock. View detail
it work very light and smooth
I bought Hurricane long throttle cable to replace the old on my Honda VFR800 VTEC 2003. Shipping time is a bit longer than 2 weeks after shipping. Hurricane throttle cable is Made in Japan, the cable is long enought to install on my bike, it work very light and smooth. View detail
good quality, perfect fit
Bought these for dragstar 1100 classic. The cables look to be of good quality and fit my bike perfectly. Don't forget to lube the cables before installing them on the bike. View detail
parts for handling
It's not yet installed, but it's the Hurricane z2 that everyone does.
I was going to ride it in the middle of the day, so it was hard to have a lot of power in the wrist part if you drive long distance . The Z2 steering wheel is more comfortable to drive.
I ordered it because it was possible. The packaging came meticulously well, very good. The above product is purchased for replacement because the existing parts do not have the length ------------------------------------- --------------------- It's still before it, but it's the hurricane Z2 that everyone does. I tried to ride it with a pure, so when I was driving a long distance, it was hard to have a lot of strength in the wrist. Z2 handles are more comfortable I ordered it because it was possible. The packaging came well. Wids are not long because existing parts are not lengthy, so purchase to replace Powered by Google Translator
View detail
Is good
When I cleaned the throttle body of my 2008 CB400SB, I decided to replace the Accelerator Wire as a precaution since the mileage reached 50,000 km. The reason why I bought the 50 millimeter long wire is because my BOLDOR is equipped with a HURRICANE Handlebar Up Spacer that can be used with the OEM wire, and the OEM Accelerator Wire is quite limited and there is no room to spare. After cleaning the Throttle body, I lubricated the wire before installing it, and then I put grease on the Thailand coil. I was satisfied with the length of the wire when I assembled it. I thought nothing special would happen, but I have several motorcycles and I can clearly see that the Axel pulls much lighter. I have several motorcycles, so I can clearly see that the pull of the Axel has become much lighter. I can twist the Axel without effort, and as a result, it is harder to get stuck. I have no complaints if I can choose various lengths and buy at this price with this quality. View detail
good product
it's product excellent. my motorcycle is mor beautiful and more complete. fast shipping. but little bit expensive. thank you. View detail
I put it on my GPZ400R.
I ordered a new Throttle Wire (pull) for GPZ400R D2. 2 days later, it arrived and I worked on it at night after work.
Don't remove the carburetor, just remove the Tank and Seat!
The work efficiency is not so good, but if you get the hang of it, you won't mind. I post maintenance records on social networking sites. (It's messy.) If you are interested, please look for it lol.
As for the feeling, I have driven about 600 km and so far there is nothing to worry about. The impression is that it is a little hard.
Price, quality, I wonder if this will be Base. I don't know about durability, but Large would be sturdy!
View detail
Very good
They are better than stock, because of this multylayer sleeve. But on the other hand it's difficult to lubricate them. Ant they are long. For very high handlebar. Too long for my classic medium size handlebar. It's not a problem for me, but keep it in mind. View detail
very good cable
It is a cable currently used for the w800, but I bought it because I thought it was time to change the clutch and throttle cables. You'll use it well.^^ View detail
Throttle Wire replacement
I'm glad the product is what I thought it would be because it was a part I needed to replace. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
As per the dimensions, it is safe.
The Outer length is also as described, and I was able to use it with 60mm Up with no problem.
There was no unraveling of the Inner cable and no wobbling of Thailand's coat.
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX
Material is not bad, OEM and the like. It looked like. It was the best if the Outer could be adjusted also on the shrink side.
ZEPHYR750 (2001 type) I exchanged the Handlebar, I bought it because the Throttle Cable was a little short.
I installed it after oiling with a missing mission oil.
Quantity : Pair (for Left and Right) Even with full lock of Throttle the weight did not change and the shape of Handlebar also matched, making Turn easier to do.
Too bad I bought Throttle of ZXR 1100 and thought about Petit High Solo,
I gave up because the Wire was short and the Outer could not be shortened.
We are thinking about this part in the future, not a defect of goods.
View detail
Fits: HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN
Throttle Cable for disconnection
Reverse SideThrottle Cable I bought it for disconnection. It was my first work but it was easier to exchange than Image. Quantity : 1 Set of 2pcs. So I also replaced Pull Side. As for durability, it is still unclear because I just changed it, but the price is also cheap and I am extremely satisfied. Because it is longer than OEM Product, people with Normal handles may need to pay attention to the line's handling slightly.
View detail
[Webike Monitor] It diverted to VTR250. if pure when the Wire exchanges for the Throttle holder of the Type which comes out ahead -- -- die length not suiting naturally but finding here [ of die length right by chance just ] -- purchase.
[Webike Monitor] It diverted to
VTR250.
if pure when the
Wire exchanges for the Throttle holder of the Type which comes out ahead --
-- die length not suiting naturally but finding here [ of die length right by chance just ] -- purchase.
quality is very good at the pure average and more than it.
View detail
High quality product. Sophisticated packaging. Mother made an excellent, well-fit. Quickly installed on the scooter.
High quality product. Sophisticated packaging. Mother made an excellent, well-fit. Quickly installed on the scooter. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Since it exchanged for the handle of the effex in zrx1100, I exchanged for the goods here. the handle of an effex is arranged as it is with a pure cable and hose -- 縲?gets -- it is -- although -- it thought that it was a little impossible in any way,
Since it exchanged for the handle of the effex in zrx1100, I exchanged for the goods here.
the handle of an effex is arranged as it is with a pure cable and hose -- 縲?gets -- it is -- although -- it thought that it was a little impossible in any way, and since a pure throttle cable moreover was cutting well for a while, it exchanged drastically.
It will manage, if it says which is used with 10-cm Long from 15-cm Long and the conclusion which I used although it wavered, and I am order and think that either is arranged.
The direction thoroughly made up thinks that this one is recommended, of course.
Although I think whether to become the comparison by already stretching about a thing and it being pure, the structure of a portion which adjusts play of a cable is also often processed just like pure, and I regard it as whether there is any point of feeling a problem.
it is that this is important -- it can use, without caring just because it is a portion which is not conspicuous! I think whether this product is in full marks at that point!
View detail