Reviews
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
Longing for Separate handle
CB400SB (2014) The LeftRight Switch Box has a small protrusion on the vehicle's LeftRight Switch Box. The LeftRight Switch Box of the vehicle has a protrusion, so it is necessary to drill a hole in the handlebar side. It was a large problem to decide the drilling position while adjusting the Master Cylinder and Brake hose so that the handlebar end would not hit the tank when cutting all the way off. I really wanted to use a separate handle, but I am satisfied that the cowl position, hose, wires, etc. were all installed as OEM. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Speaking of Cafe racer
Speaking of Cafe, the original
Separate handle, Swallow, and Condor.
I think, but of those three, if you don't reverse-engineer it.
I think the first Position is the easiest.
However, when I installed it, I was surprised.
It looks like it's angled properly, so...
It is moderately Recommendation.
For the last 1.2 years, according to Manufacturer, the parts
The ingredients themselves are not stable, he said.
I think it will take much longer in terms of delivery time.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
I wasn't sure if I should reverse-engineer it.
Better posture than OEMHandlebar! View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Excellent appearance & operability
[How is it used?
I changed XJR400R from OEM Handlebar to this Condor Handle.
Was the one you received as per Image?
The precision of the construction is good and the shape is cool.
Was the installation difficult?
It was the first time for me to replace the handlebar, so I had to remove and install the switch, fine-tune the angle of the handlebar, etc. The drilling of the holes for the switch box was done by a nearby motorcycle shop.
How was your experience with it?
With the OEM Handlebar, it seemed a little far away, but now that the Throttleetc. is in front of it, it is much easier to ride.
Curve also feels easier to turn.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Point or hang of installation:Anyway, it is to do fine-tuning repeatedly.
If you add a Switch box, you should fine-tune it, if you add an AxelSlot, you should fine-tune it, and repeat until you are satisfied.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Thoughts.
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used to it.
If you are going to reverse mount it, CondorSW looks better without interference to Tank. The product itself is very good, so it depends on how you attach it.
I only reverse-mounted it, so just for reference, Accelerator Wire and OthersWire can be used as they are. However, I think it would be better to change the wires if possible, since they seem to be in pain. The same can be said for any handlebar replacement, but I think a drill is necessary because it is necessary to drill holes to fix switches.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Cool
The installation was no problem and I like using it without feeling any fatigue. View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
It is good !!
I thought that I wanted to replace the wide Handlebar,
In the same way I thought Tsumaranai and chose this Handlebar.
As a result it is not hard for things that have become somewhat forward-looking
I am satisfied with Large becoming Sporty than NORMAL.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Ideal for me
Separate handle is stiff forward.
But, I want to Custom!
So, select CondorType.
Even with Normal handle comparison, the forward tilted posture does not change much, and there is no need for Rear Sets.
It is exactly right for age.
As the Handlebar End got down, the clearance with the Tank when the Handlebar was turned off became narrower, but none won.
It was a little troublesome to drill a hole in the Handlebar with Switch related installation.
Looks like it feels like a Custom feeling.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Cool! Easy to drive!
We are riding the ZrX400 of the 2006 year formula.
Condor Handle interferes with Bikini cowl etc etc. I listen but I was able to install it without problems.
Clear the Handlebar Clearance with Tank Thumb 1. Adjust with a gap of about 5
HandlebarRight Side's OEMBrake fluidTank? Felt it was Limit.
Hose and Wire were still OEMs and there was no particular problem.
It is necessary to open the hole for fixing Electrical Switch Series by yourself.
Exchange time required time about 1 hour
Driving situation
Thinking from Bar handle, it makes me feel a bit cramped, but for someone I like it does not accumulate.
GSXetc. It feels like Separate handle.
Corner is also easy to bend (There are individual differences) I feel like it got it..
Mirror became easier to see also the arm became low!
View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
Just a little Mischief Position Raccoon
Separate handle posture of SR seems to be painful, purchasing a sharp knife instead of an ordinary Pipe Handlebar.
Wire did not matter, I insisted a little and it looked good.
The riding attitude is comfortable and satisfying.
I bought it for another one, R1 - Z..
View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
Middle between Bar handle and Separate handle
I installed it in the 14-year CB 1300SB. I wanted to make it a Separate handle, but it seems that there are various problems too, so here it is safe ,, both Clutch and Brake have bremboRCS attached. When you turn off the Handlebar, Lever root is Cowl. Since Brake side slightly presses Lever, Brake is applied in the condition of adjustment, so it is dangerous, so Setlev the Handlebar to the front using HURRICANESet Back Holder.
Position came slightly ahead, but it was easy to attack at the pass and it became easy on town ride. This Recommendation. Black is easy to get damaged so carefully when installing!
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Regrettable
Used for bar handling of ZZr 1100.
Both the width, the height, and the diaphragm were not discomfortable, it was quite satisfactory Position, but as the height, the narrowing and the narrowness got hurt and just Cowl (Not Screen) And Brake lever will be hit, so when Left is full, automatic Brake!
There was no problem for riding normally, but pushing walking and UTurnetc. I dismissed that I was bibi thing to fall over with.
It is a little lower, it is a bit wider, and if the diaphragm is a bit more relaxed it may have been no problem.
It seems that SWCondor is out for such people (I learned about a while ago)
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
No more than expected!
Being more beautiful than I thought, I was looking for a while or trying it on the Handlebar. Installation is scheduled to enjoy spirit in the upcoming weekend. However, the schedule will be undecided and not finalized! - - - Wonder. View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
Condor bar
CB400sf (nc31) We mounted on. Handlebar drilling to the Switch box part was necessary, but the installation itself was easy. I enjoyed a different ride from OEM. It was not so tight as Position, I did not feel cramped around the suspension. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
very good
I attached it to the W800 of Kawasaki.
Pass etc.. But I installed it to make it easy to run even a little, it was just right Position.
It became easier to apply load to the Front and it looks better.
The truth is that Separate handle is better for running - - - I think that it is just right to make a simple change.
View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
LEGEND of the Handlebar circle
Up to now Forward Conti (Also Made by HURRICANE) Although I was wearing it, I wanted to be in front of Position so I made it to Condor.
Since the width became narrower and higher than before, we were able to afford the Wire as well. Of course, Position will also be easier and you will finally feel like going to Touring.. (I've been using American for long distance. )
In my case I only extend Brake hose. In the previous Handlebar, other Wire types changed handling to Limit, but this time it may be possible to remain in NORMAL's handling.
Seal of paper peeled off to some extent Spray the Parts cleaner and wipe it clean up. I would like you to make Seal a little more peelable if possible.
This old Handlebar is really Parenthesis, I think that quality such as welding and painting is also the best.
Parts of parting are attached, but I like peculiarly here nicely.
View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
I hear that the posture of the Riding got tired easily for a while, and the former Handle made it the Condor handles near the body with some Up. appearance was also smart, and the price was also cheap, and although time also required attachment
I hear that the posture of the Riding got tired easily for a while, and the former Handle made it the Condor handles near the body with some Up.
appearance was also smart, and the price was also cheap, and although time also required attachment, it has attached [ it could adjust into the Position suitable for itself, and ] satisfactorily especially! He has no
complaint!
View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
[Webike Monitor] It thought that & posture which interferes with a Tank and meets was likely to become tight although the purchase of the Swallow handle was considered at the beginning of , and the posture purchased the Condor handles which seems
[Webike Monitor] It thought that & posture which interferes with a Tank and meets was likely to become tight although the purchase of the Swallow handle was considered at the beginning of
, and the posture purchased the Condor handles which seems to be easy.
The comment with which it equipped are pleasant anyhow! Although
former 々 thinks that there is also a cause which was a Up Handle, a sense of togetherness with a Motorcycle is completely different.It is the shin without the
Corner and the posture about which it was easy to turn at and worried being tight to there.It did not interfere in the
Tank and was individual very good shopping.Supposing even
mentions a difficulty, is it having to vacate a hole required for attachment by oneself?The
hole referred to the Handle attached from the first, and I vacated.
View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
useless, since form is very pleasing -- by the basis, it attached to CJ43A and saw! As expected, it interfered in the Inner cowl and a Handle did not go out.
useless, since form is very pleasing -- by the basis, it attached to CJ43A and saw! As expected, it interfered in the Inner cowl and a Handle did not go out.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
[Webike Monitor] It is exchange from the pure Handle of GN125. Since it was the exchange in which the Front fork is downed [ make ], the Handle became quite the bottom. It is not the Position that an arm becomes painful. Operativity became quit
[Webike Monitor] It is exchange from the pure Handle of
GN125.
Since it was the exchange in which the
Front fork is downed [ make ], the Handle became quite the bottom.
It is not the Position that an arm becomes painful.
Operativity became quite good and also felt appearance refreshed!
View detail