Reviews
Fits: YAMAHA XJR400R, HONDA MONKEY, HONDA HORNET250, HONDA APE 50, HONDA APE 50, KAWASAKI ZRX400II, KAWASAKI ESTRELLARSCustom, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI W800, KAWASAKI W400, HONDA MONKEY, KAWASAKI 250TR, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA TW200E, YAMAHA TW225E
Handlebar replacement for SV650!
For handlebar replacement, it is necessary to drill a hole to hold the switch in place.
The SV is even more compact than the OEM because it is 1~2 cm shorter on the One Side.
The aperture angle is larger than OEM and the handlebar height is a few millimeters higher than OEM.
I think it is the best handlebar for me, although it is hard to say because each person has a different body shape and riding posture.
View detail
Fits: YAMAHA XJR400R, HONDA MONKEY, HONDA HORNET250, HONDA APE 50, HONDA APE 50, KAWASAKI ZRX400II, KAWASAKI ESTRELLARSCustom, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI W800, KAWASAKI W400, HONDA MONKEY, KAWASAKI 250TR, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA TW200E, YAMAHA TW225E
Quality is fine
I use it on my GIXXER250. 20mm up on the riser to adjust the height, and the Riding Position is much easier. Drilling is necessary but not difficult. View detail
Fits: YAMAHA XJR400R, HONDA MONKEY, HONDA HORNET250, HONDA APE 50, HONDA APE 50, KAWASAKI ZRX400II, KAWASAKI ESTRELLARSCustom, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI W800, KAWASAKI W400, HONDA MONKEY, KAWASAKI 250TR, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA TW200E, YAMAHA TW225E
I think I failed to use it on the W800
I've been using the EZ-FIT-Bar, but I just need a little more height! And greedy
I purchased this product
The quality is good with no plating irregularities and no surface scratches
400ccClass for Replacement compatible Pipe Handlebar I think the width is just right for the
However, this width seems to be narrow when it is W800 used this time, and it becomes a tight position around the shoulder
I ended up having to go back to the EZ-FIT-Bar I bought last time
Well, it's a MotorcycleParts-esque story
As for the products themselves, they manufacture and sell a wide variety of Pipe Handlebar It's only HURRICANE
Very good product quality and I would recommend it to anyone
That's why I was a little disappointed (Lol)
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, KAWASAKI W400, KAWASAKI 250TR, HONDA MONKEY, HONDA MONKEY, HONDA HORNET250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SUPER BOLDOR, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400
HURRICANE BM Continental 3 Type Φ7/8-inches Handlebar Steel
Been using this handlebar for a few months and it is much better than my previous wide handlebar. The sweep back angle and height brings the handlebar closer to my body and easier for maneuvering. The shorter length from end to end and the sweep back angle towards me makes it alot more easier for lane splitting. All in all better posture and handling for urban riding. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, KAWASAKI W400, KAWASAKI 250TR, HONDA MONKEY, HONDA MONKEY, HONDA HORNET250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SUPER BOLDOR, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400
This is the limit.
Since it was 163 cm and Small handle, I felt Handlebar was a bit far and low, so I exchanged it. Harness and Wire had plenty of time, but since Brake hose was feeling Limit even at NORMAL, I searched for the range where the Large Year Position does not change and made it to this Handlebar.
Because it is a Universal Product, install mounting hole of vibration proof material Quantity : Pair (for Left and Right) Quantity Pin hole of Switch box with 2 places : Pair (for Left and Right) You need to be able to open one place at a time. The dimensions from the end and the vibration isolating material mounting hole are Quantity : 2pc. Care must be taken so that the hole position of Set is 180 degrees relationship. The position of the hole in the Switch box, after positioning the Handlebar and Lever correctly, put Pin in red and marked the Handlebar and opened it. I did not need it because it was remodeling so that the parking brake can be operated with Lever, but NORMAL also needs to open the pin hole of the bar KingBrake.
Brake hose was in a state of being sticking unless you remove what is fixed at the Upper clamp.
I thought that Grip is ahead better, but I think that it is impossible to replace Brake hose any further, because it is ABS, so I am not confident of bleeding at the time of replacement.
View detail
Fits: YAMAHA XJR400R, HONDA MONKEY, HONDA HORNET250, HONDA APE 50, HONDA APE 50, KAWASAKI ZRX400II, KAWASAKI ESTRELLARSCustom, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI W800, KAWASAKI W400, HONDA MONKEY, KAWASAKI 250TR, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA TW200E, YAMAHA TW225E
Shape Material is both good feeling. I will try HURRICANE next time.
ZEPHYR750 (2001 type) I bought it because the OEMHandlebar was a little crooked.
The Handlebar I bought this time is a nice feeling, but there may be shapes to fit more.
Since this Manufacturer is rich in variety, I plan to exchange Handlebar several times and search for Best position while getting on in the future.
View detail