Reviews
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S
A must have when changing Grip!
I replaced it together with my commuter Address when I replaced the grip.
The OEMInner Cone has warts and bruises that need to be removed, so we introduced this one.
I was able to kill two birds with one stone because I didn't have to remove the Grip when I changed it.
I pimped it out and so far it's working fine.
View detail
It's an ordinary throttle pipe.
I purchased this product because I heard that it is a large machine that can be diverted to the OEM holder of WR250X. In conclusion, you have to modify it to install it. I don't have anything bad to say, just use the R6.
I processed it, but it was subtle, so I took it off. The thing itself is an ordinary inner.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 50, HONDA APE 100, HONDA Live DIO Series, HONDA MONKEY, HONDA MONKEY, HONDA XR50 MOTARD, HONDA XR100MOTARD
Used for 12VMONKEY
I have to regrip it delicately to be able to open Axel fully.
I feel like I've changed my mind.
I don't want to make it a High Solo in any way.
View detail
Fits: KAWASAKI KLX125, KAWASAKI KLX150, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX250, KAWASAKI D tracker, SUZUKI 250SB, KAWASAKI D Tracker 125, KAWASAKI D-TRACKER-X
It's neither good nor bad
It's not going to be a High Solo, but I replaced the Throttle cone on my D Tracker because I was getting reluctant to move it.
There seems to have been no large reduction in Friction loss.
I felt that it was simply the experience of being a Replace.
However, I am satisfied with the performance and functionality of the product as expected.
View detail
Fits: HONDA XR400 Motard, HONDA CRM250R, HONDA CRM250AR, HONDA XR230, KAWASAKI KLX250, KAWASAKI D tracker, SUZUKI 250SB, HONDA XLR250, KAWASAKI D-TRACKER-X, HONDA XR230MOTARD, HONDA XR650, HONDA XR250
Open end supports Hand guard.
When you install the ZETAHand guard, in case of NORMAL, if there is no hole in the throttle or the hole is too small and it needs processing, if you make a mistake in processing, it will be Large.
There are some difficulties such as breaking it during processing, processing does not work well, and installation does not work well.
With this, you can easily install the Hand guard without any modification.
View detail
MT07 Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loose-Loos
I would like to use the MT07 for my regular legs, but I have to open and close the throttle very nervously because it's small but has a lot of power. It would be. Ladies and gentlemen, it's a The thumping sensation. You say.
This throttle pipe is designed to reduce the diameter of the windings to small to allow for more subtle throttle operation. The one I purchased was 28pie. I thought that it was too small, but there was only this choice, and there was a cheap price, and I bought it in vain.
The installation does not do any processing, just put up the wire on the Return side and the adjustment is finished. It is Kan Tan.
The current Throttle is well made and not difficult to disassemble and adjust.
My MT07, 5 years old with 10,000 miles used. When I first rode it, I thought it had a very Severe Throttle feeling, but the cause was rust on the Handlebar side of the Throttle part. I can't see how it rusts so well.
When you remove the rust and run it, there is still a little bit of Severe feeling, but I think there is a Large motorcycle like this one.
I bought this Inner Throttle only and used the Outer as OEM and installed it without any modification of the Throttle.
The MT07 is tamed by this Throttle and the Seat anchored by the Seat. It's a very light, fast and easy to ride motorcycle. By the way, the Anko is Ni Bird's 3-ply low resilience seat cushion with a thickness of 40mm.
View detail
When the Grip heater is installed
The SEA BASS OEM Throttle is engraved with a Giza Giza and Rib to prevent the Grip from shifting.
I'm too lazy to shave off the Rib, so this Teflon (R) Use the Inner Pipe to attach the Grip heater.
It's a little pricey, but it's convenient because you can choose the diameter of the windings, so you can make it Large, which is close to OEM, or you can make it a little High Solo.
View detail
Fits: HONDA CBR1000RA, HONDA VFR800FI, HONDA Forza300, HONDA SUPER CUBC125, HONDA VFR800A, HONDA VFR800, HONDA RVT1000R, HONDA NC750XD, HONDA Monkey125, HONDA FORZASi, HONDA NC750X, HONDA GROM, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, HONDA CBR300R, HONDA CBR600RA, HONDA CBR1000RR, HONDA CBR250R
To replace the Grip
The OEM Throttle cone has warts on the surface and cannot be easily replaced by Grip.
This throttle makes it wart-less and easy to replace the Grip.
Also, there is a little bit of Rib to prevent Gap.
View detail
The diameter of the inner pipe can be changed.
This time I needed it for radiphone purposes, not for High Solo. I chose the Φ40, which is almost the same as the NORMAL, with the same throttle response.
If you don't like the accelerator operation at low speeds to become severe and difficult to ride, this is Recommendation.
View detail
Used to change the winding diameter
I used it to change the winding diameter of Active's High Solo.
I wanted to make my Solo more High Solo than the diameter that came with it, so I bought the Large diameter ones.
I'm not a big fan of the High Solo, but it's not as easy as it should be.
View detail
Fits: HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450X
Convenient
Since the OEM is closed end, it is made open end with the Hand guard installation etc. It is useful when the OEM processing is large (when you cut it off, the throttle width is not large enough). (Because it is missing, I have to open the chimney with Leutor or something). The quality is the same as OEM, so I have no complaints. View detail
Fits: KAWASAKI KLX125, KAWASAKI KLX150, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX250, KAWASAKI D tracker, SUZUKI 250SB, KAWASAKI D Tracker 125, KAWASAKI D-TRACKER-X
Installed at the time of Handlebar replacement.
Hand guard and Grip and the 2016 KLX250 Handlebar when replacing the Handlebar. Replace the Throttle tube.
The Handlebar area has been redesigned and the Throttle is lighter
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
For now, I'm happy with it
I was a little disappointed that there was some BALI left on the product It is easy to install However, I thought the change would not be as much if it wasn't a bit more High Solo-like View detail
Fits: HONDA PCX150, HONDA ADV150, HONDA PCX160, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125
It is effective
My car, PCX150 (KF30) and ADV150
I installed the Grip heater at the same time, so I was able to replace it efficiently
The exchange is with the OEM Product with no modification whatsoever
The tools are Phillips Screwdriver, Slotted Screwdriver, and Radio pliers, for example
Time required
With High Solo only
If there is some skill, it will be about 30 minutes
The effect,
The RPM range has been reduced to about 80%
My wrist pain has been cut in half
I highly recommend it if you have many opportunities to open it up to the fullest
View detail
Fits: KAWASAKI KLX125, KAWASAKI KLX150, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX250, KAWASAKI D tracker, SUZUKI 250SB, KAWASAKI D Tracker 125, KAWASAKI D-TRACKER-X
Unable to mount
D Although it's labeled for the Tracker, it's not the size that will fit in the holder 。
The D Tracker 250’04 cannot be installed on a large diameter D Tracker
Too bad
View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
The price is also cheap, and when it comes to Grip replacement, yes!
I bought these to replace my Grip The price is cheap, so it's easy to buy I don't know about the other products because I've only bought this one, but I think it's Smooth compared to the OEM I don't have to replace the OEM as I've only used 5,000 km View detail
Fits: HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 50, HONDA APE 100, HONDA Live DIO Series, HONDA MONKEY, HONDA MONKEY, HONDA XR50 MOTARD, HONDA XR100MOTARD
It's almost a Universal Product!
It is used for the switch box and throttle holder of CB125T that I used for another model of car I did
Big bikes often have a separate switch box and throttle holder But in the case of Mini bike, there is a good chance that Switch box and Throttle The holder is integrated
And with the NORMAL Throttle cone, when you install the external carburetor Full throttle if the throttle valve cannot be raised fully or if it is not regrasped It may not be
This is a recommended product for those who want to improve such conditions
I had simply ditched the NORMAL Throttle cone for this purchase It is only, but it seems to be expensive to find a used one, and the purchase of a new one of OEM is also something that is not I chose this one because it's not white
The CB125T (Throttle holder) is also available without incident
Basically, if the Handlebar is 22.2mm and the Throttle is 1 pc off, you can use it It can be done, can't it?
The Grip was 110mm, so it's a moped size
Since this is a Pierced Type, pay particular attention to the length of the Grip
Probably if you try to put a 125mm one on, it will be hard to turn around
The Carburetor I used is PZ27, which is the so-called KEIHIN PD series Carburetor
Full throttle was possible without regripping the Limit
It seems that the Switch box of CB125T is going to be able to use the Switch box of CB125T on the Custom vehicle safely
If you put the Grip on, it will be completely invisible, but the color is black and the surface is uneven as the name suggests is not Flat
I don't mind it when I install a regular Grip, but thanks to the Flat, I can use the Grip heater as a I appreciate it when I put it on
You can use Posh with confidence as the quality is stable
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 90, HONDA little cub, HONDA little cub
Don't underestimate the 10 percent
The duo from Tokyo were surprised to see a pair of guys from Tokyo at the Super Ultra Low Slow and Iron CUB
That family's LITTLE CUB is also surprisingly low profile, so the full opening is as far away as possible
That distance is Level to regrip
Thanks to that, the throttle could not be turned back on at the full throttle to brake rapidly from the full throttle & hellip! ;…
What an experience shareholders should probably buy
[Only 10% change
This Throttle...only 10 percent change You're wondering what the difference is only 10 percent!
Ladies and gentlemen, when the sales tax changed from 8 per cent to 10 It was only 2 percent and you made a LARGE fuss about it!
That's what I mean
With this on, the Ultra Low Slow becomes a normal MotorcycleLevel
It's so effective that it becomes an ordinary Motorcycle sensation Throttle It is not suitable for those who want a High Solo with a high level of performance
I don't like the OEM low slots; I converted my carburetor to a Large caliber This is for people who are
But this 10% is pretty effective, and the price is cheap, so buy it and feel cheated Please give me a copy
We do a good job for the price
[About the exchange]
The installation goes generally as per the Instruction Manual with no problems
But the grip thrust washer that comes with it, be careful of the order in which you put it in
I forgot about it, so I cut off the edge of the washer and put it in later
Well, it still doesn't cause any problems
By the way, exchange Timing is Recommendation when you exchange Grip
I also remove the Grip
Huh? Want more High Solo? I think you can drop your gold in Mukawa
Mukawa High Solo ▼
https://www.webike.net/sd/542666/
This is 22% High Solo
But the Takekawa is too expensive for me, so the CF POSH one is more affordable I think it is
View detail
I'd like you to add some more information
Depending on the vehicle, you don't have to purchase the throttle holder separately, but you can use the OEM housing to make the vehicle more comfortable It may be available
It is an indispensable part of the setup when changing the carburetor, and it is easy to change the opening angle It's nice to be able to I bought several sizes in bulk
In addition to the rewind diameter, information on the thickness of the Thailand-coated part and the length of the Grip part is It would be useful if it was listed
View detail
Fits: YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog
It is not High Solo for JOG
I previously purchased this Manufacturer's Throttle for my CUB and DIO
Both of those items were slightly High Solo, so I'm going to take a slightly High Solo as well I bought it with high hopes
When I put it on, it had the same pull as NORMAL
When I checked, the product description said "High Solo" It was a misunderstanding based on our assumptions, as there was no mention of
You have listed the OEM Parts part number NORMAL same etc., not High Solo I would have appreciated it if you had clearly stated that
High Soloization was not achieved, but the product itself is very accurate and the OEM product is very good I think it's good enough for Repair
View detail