Reviews
sound good
Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. We recommend this product to those who love and like bikes. Reliable product, fast delivery, I am very satisfied with the result. I am very satisfied. I will order again and trust. Thank you. I love you. I will order today. Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. For those of you who love and love bikes, Now I recommend this product. Reliable product, fast delivery, very satisfactory results I like it very much I will order again and trust thank you Love it I'm taking orders today View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
Chromium PlatingHorn
I used it on a 6V GORILLA that I converted to 12V. The plating is high quality and the sound is not cheap, so I am glad I bought it. View detail
Replaced with Plating Horn
The price is reasonable and the Plating quality and sound quality is good.
To the Horn Bracket attached to the Emblem Bracket of Mukawa
I was able to install it.
If you use the Wiring of MONKEY125 as it is
The drainage hole has been turned sideways on both sides.
I don't ride in the rain, so we'll see how this goes.
It's a modest dress-up, but it's highly satisfying.
View detail
Compact to improve volume and sound quality
I was thinking of replacing the OEMHorn as it sounds poor.
I wasn't sure if I should go with DoubleHorn.
The lack of room for mounting space and
It was a bit pricey from the posts of those who purchased it.
As a Manufacturer, we have confidence in our products, and the sound quality is excellent at 400Hz, 500Hz, and
Three types of 600Hz can be selected, and Cover is included for
I chose the Single Body by piaaSports Horn.
To install the Body, remove the OEMHorn and
I just had to replace it.
Wiring is a special type of OEMHorn Plug.
I bought a Denali Electronics Connection Plug.
It was easy to connect.
I haven't compared them, but my feeling is that
I think it is right to install 500Hz.
View detail
Chrome horn
It is a good item that can replace oem horns. It has a nice design and is easy to install. Sound is similar to the oem horn. It's a bit big. View detail
Plating looks good on American.
I installed it on DragStar250.
The bolt holes on the bracket that came with the kit were too small to fit, so I used the original bracket that came with the kit and installed it.
The work was done in about 10 minutes.
The Shiningly look of Plating suits American very well.
The size is a little larger than the OEM Horn, and the presence has been increased.
View detail
It is made in Taiwan.
I bought this because my KSR2 OEMHorn stopped sounding.
You can buy a new one for the same price as OEM used one or less, so I think the cost is very high.
There is Horn made by other companies in the same price range, but I chose DAYTONABrand of safety and trust because it is the one which cannot be disassembled and repaired basically when the inside breaks down like this time.
The Package includes MADE IN TAIWAN and I personally trust them more than products made in China or other Southeast Asia countries.
The material is iron, but the surface is coated with thick plating.
KSR Horn is DC, so I could use it normally.
I think it is seldom, but I haven't confirmed whether it sounds when Horn is AC.
There is a nave screw for the adjustment of the example on the reverse side, but it is not written in the instruction manual. Don't spin it, it'll break. It is stated that
At any rate, there was no problem in the use with the sound quality as it was without touching anything.
It is unconfirmed whether it is possible to adjust it by turning Screw when it stops sounding due to aging or whether it is really damaged if you turn Screw.
In the case of the KSR, remove the 2nd oil tank and work on it.
However, if you remove only one of the two screws from the oil tank, the other screw hole will be overloaded and may break.
By the way, OEM new products of Oil tank have been discontinued.
The OEM bracket has a rubber damper to prevent vibration, but the screw length of HornBody is too short to use it.
If the neck is long, it may become severe in terms of space depending on the type of car, but even the Spring washer of the loosening stopper was difficult to insert, so I thought I would like to set the screw longer by 5-10?
In the meantime, I'm tightening it up.
We have already installed the countermeasure regulator on our KSR, but we were able to install it without any problem.
As for the Nut of Reverse side, there was Space that tightened without a problem with the Twrench of normal Size by removing the Shroud of Right Side.
Because of its location, it is exposed to rain and mud, so I cleaned the terminals well and applied Contact Grease before installing.
The sound quality is larger and thicker than OEM Horn, and it became about a light car.
Horn, which is seldom used but is quite impatient when it doesn't ring at the time of need, can be firmly claimed, and I am satisfied.
View detail
Bracket will break.
I used to use it on my KawasakiZ1, but the bracket broke after three years.
I guess it couldn't take the vibrations.
View detail
usually
I bought it for the cost and small space. It works fine, and the sound is lovely. View detail
Expected
The OEM Plating Horn was rusted out, so I replaced it along with the Lo.
The reason why I chose this is that it was a colored product, not plating, and had the same shape as the OEM. The tone is almost the same as OEM, so it is not suitable for people who want to change the tone.
View detail
Good sound
Best sound ever. The process is easy, even for a clumsy person like me. View detail
DoubleHorned with OEM UCH-201 and this product.
[How is it used?
The HornUCH-201 of the car body Standard Equipment and this product make the DoubleHorn of the tone High and Low.
If you use a bracket that is not included, you can fit this product inside the Shroud and make it waterproof.
Was the installation difficult?
The selection of the bracket for the Other Brand Product and the installation of the HornRelay requires the removal of the Shroud and Cowl, so it becomes a little complicated.
How was your experience with it?
DoubleHorn has become a powerful Horn like a car and shows its power.
[Included Parts:were they on?
One Side Flat Female Terminal Cord is Quantity:It comes with 2pc.
[ITEMS TO BUY TOGETHER
Quantity as Horn1pc.3.5A consumes:2pc. Set consumes 7A, so I added an external HornRelay.
HornRelay harness is the same Manufacturer's Horn harnessQuantity:You can purchase Set SZ-1133 for easy Wiring.
We were quoted and purchased from Webig's quotation system as it was not one of Webig's standard products.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Safe and reliable Nikkosan products
I replaced the bracket of Universal Type Horn of other RiproManufacturer because it was broken.
It is made by Nikko. I think it is close to the OEM Initial Model. The tone is also quite austere.
View detail
KIJIMA Horn
I was using a cheap Horn from OEM, but it got Gold fatigue (?). and the bracket was
It was broken, so I bought Horn of KIJIMA this time.
The broken Bracket was thin, so I think it was broken by the vibration for many years.
KIJIMA's Horn Bracket is thick enough not to be broken by vibration.
Because the body is Red, I made Horn Red, too.
The size of the product is larger than I expected, but the quality of the product itself seems to be good without any wound.
I think to
The color of Red is also beautiful, and I am satisfied, however, the sound is an ordinary sound that is not strange.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Large I'm strange
The Bracket is well made and I don't think it will ever bend or come off.
I would give it 5 stars if it was a little cheaper.
View detail
It is a common Universal Horn, and the sound was as I expected.
It was easy to install.
LargeIt was good.
View detail
Plating shine is good
This horn has a very nice shiny plating and looks great with American style. This horn has good quality and beautiful plating, so it looks more custom than NORMAL horn. View detail
Can be installed anywhere.
The horn has a plating body and looks great in American. The quality and tone are good and the price is reasonable. View detail
Large volume
[How is it used?
horn
Was the one you received as per Image?
It's about as large as two Whirlpool Horns, so you shouldn't judge it by the picture alone.
Was the installation difficult?
If you have the knowledge of Wiring, you can install it easily.
How was your experience with it?
High-pitched and Large volume.
[Included Parts:were they on?
Mounting Hardware、RelayWiring
[Was there anything that disappointed you?
Translation (There is no instruction manual to enter here.
View detail
Easy to install.
The size is small but the volume is large and there is a sense of presence. View detail