Reviews
Fits: KAWASAKI ELIMINATOR250SE, KAWASAKI ELIMINATOR250, KAWASAKI ELIMINATOR250LX, YAMAHA YZF-R3, YAMAHA YZF-R25, KAWASAKI ELIMINATOR250V, KAWASAKI ER-5, KAWASAKI FX400R, KAWASAKI GPX250R II, KAWASAKI GPX250R, KAWASAKI GPX400R, KAWASAKI GPZ250R, KAWASAKI GPZ400R, KAWASAKI GPZ400S, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI VERSYS-X 250, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI ZEPHYR400
exchange
I bought this for a ZZr250 Rear Sprocketfor replacement, it is lighter than the OEMSprocket and looks better in Gold. It is an applicable product and I was able to install it without any modification. View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, YAMAHA AG200, YAMAHA TW125
A little tainted.
Used for Restore of TW200
I bought it to go along with the Front that I also replaced.
Maybe it didn't have to be Duralumin.
Well, I bought it.
The items are clean and trustworthy.
View detail
Fits: SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650X, SUZUKI V-STORM250, SUZUKI ACROSS, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400V, SUZUKI BANDIT400V, SUZUKI BANDIT400VZ, SUZUKI BANDIT600, SUZUKI BANDIT600S, SUZUKI BANDIT650, SUZUKI DESPERADO400 WINDER, SUZUKI DESPERADO400 X, SUZUKI DESPERADO400, SUZUKI DESPERADO800, SUZUKI DESPERADO800X, SUZUKI GLADIUS400, SUZUKI GLADIUS650
Rear Sprocket replacement
Changed Front from 14T to 16T and Rear Sprocket from 48T to 46T.
I thought it would be sluggish at the start because the GEAR ratio was quite low, but I don't mind that much.
It is easy to handle for long touring and city driving.
View detail
Fits: HONDA Monkey125, HONDA SUPER CUB C125, HONDA GROM
SUNSTAR Rear Sprocket Duralumin
Chain replacement (Mileage 8,000 km) Sprocket was also replaced along with the
Satisfied with the improved appearance compared to OEM.
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SP, HONDA CB1300ST, HONDA CB900F HORNET, HONDA CBF1000, HONDA CBR1100XX, HONDA CBR600F, HONDA VTR1000F, HONDA X11, HONDA X4 TypeLD, HONDA X4, YAMAHA YZF-R6
be confused about the color of something
[How is it used?
Sometimes Touring
Was the one you received as per Image?
Yes
How was your experience with it?
Good
[Points to note]
Careful installation
How did it compare to other products?
Good color, other companies are flashy Gold, but SUNSTAR is gentle Champagne gold.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA MT-03, KAWASAKI ZZR250, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ, KAWASAKI Z250SL, KAWASAKI VERSYS-X 250, KAWASAKI Z250, KAWASAKI Ninja250SL, KAWASAKI Ninja250, KAWASAKI GPZ400S, KAWASAKI GPZ250R, KAWASAKI GPZ400R, KAWASAKI GPX400R, KAWASAKI GPX250R II, KAWASAKI GPX250R, KAWASAKI FX400R, KAWASAKI ELIMINATOR250V, KAWASAKI ER-5, KAWASAKI ELIMINATOR250SE, KAWASAKI ELIMINATOR250LX
lightweight
I purchased the SUNSTAR RK-102-41 for my YZF-R25. I have been using the 41 for my Driven Sprocket, so I decided to use the same one this time as well. View detail
Fits: SUZUKI GSX250FX, KAWASAKI ZXR250R, KAWASAKI ZXR250, KAWASAKI BALIUS, KAWASAKI BALIUS II, HONDA VTR1000SP-1, HONDA VTR1000SP-2, HONDA CBR954RR, HONDA RVT1000R, HONDA CBR954RR FireBlade, HONDA CBR929RR, HONDA CBR600RR, HONDA CBR900RR, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR1000RR, HONDA CBR600F Sports
Nice quality
thats is nice quality and light if you looking for rear sprocket this is your choose, this brand very nice. and good service super fast delivery to other country. View detail
Fits: KAWASAKI ZR-7, KAWASAKI VULCAN800, KAWASAKI ZEPHYR750, KAWASAKI W400, KAWASAKI VULCAN800 Classic, KAWASAKI VULCAN800 Drifter, KAWASAKI VULCAN400-2, KAWASAKI VULCAN400, KAWASAKI VULCAN400 classic, KAWASAKI VULCAN400 Drifter, YAMAHA srx-4, Others DYMAG 2011 and later production models, KAWASAKI ZR-7S, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SRX-6, YAMAHA SEROW225WE, YAMAHA SDR200, YAMAHA RZV500R
Fitted with 520Conversion of Zr-7
I installed 36T with 520Conversion in Zr-7.
I have not researched it in detail, but I think the only 520Sprocket for Zr-7 is lineuped only by SUNSTAR. I would be very grateful if there is a 520 setting since it is an old motorcycle.
Before the replacement, I had a 525 OEMSteelSprocket, so the 520 Duralumin is laughably light. And of course, I feel more nimble when I roll my Motorcycle.
Life may be inferior to Steel, but I personally find it acceptable because I think Large is what you get with lighter weight.
View detail
Fits: SUZUKI GSX250FX, KAWASAKI ZXR250R, KAWASAKI ZXR250, KAWASAKI BALIUS, KAWASAKI BALIUS II, HONDA VTR1000SP-1, HONDA VTR1000SP-2, HONDA CBR954RR, HONDA RVT1000R, HONDA CBR954RR FireBlade, HONDA CBR929RR, HONDA CBR600RR, HONDA CBR900RR, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR1000RR, HONDA CBR600F Sports
Sunstar sporcket
Good quality and more light more stronger, i will buy it again and super fas shipping. Recommended to everyone. Must try it. View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, HONDA XR200R, HONDA XR200R, HONDA XR200R, HONDA XR200R, HONDA XR200R, YAMAHA XJ6 DIVERSION F, YAMAHA XJ6 DIVERSION F, YAMAHA XJ6 DIVERSION F, YAMAHA XJ6 DIVERSION F, YAMAHA XJ6 DIVERSION F, YAMAHA XJ6 DIVERSION F, YAMAHA XJ6 DIVERSION, YAMAHA XJ6 DIVERSION, YAMAHA XJ6 DIVERSION, YAMAHA XJ6 DIVERSION
regularly-scheduled replacement parts
Replacement from OEM, not much change in texture and slightly lighter weight.
It's a regular replacement part.
View detail
Fits: SUZUKI GSR400, SUZUKI SV1000S, SUZUKI V-STROM1000, SUZUKI GSX1400, SUZUKI GSX1300R HAYABUSA, TRIUMPH DAYTONA650, TRIUMPH SPEEDFOUR600, TRIUMPH TT600, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER ABS, TRIUMPH THRUXTON, TRIUMPH THRUXTON, TRIUMPH SPRINT RS, SUZUKI SV1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI GSR600
super ligh weight
I ordered a 520 conversion kit for my Hayabusa 1300R which include Sunstar rear sprochet duralumin 43 teeth same stock size (stoch with 530 size). The Sunstar rear sprocket has super ligh weight, full kit include DID 520 ZVM-X chain, front and rear sprocket weight only about 2.5kg, I think I've lost 50 percent of the weight. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja650, KAWASAKI VALCAN S, KAWASAKI VERSYS1000 SE, KAWASAKI VERSYS650, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n
Lightweight &Dress-up
It is just so light. I don't feel any stress at all while riding. It looks beautiful and perfect. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja650, KAWASAKI VALCAN S, KAWASAKI VERSYS1000 SE, KAWASAKI VERSYS650, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n
Exchange together
[How is it used?
The ironclad rule is to replace the Sprocket at the same time when replacing the Chain, but it was a hassle, so I bought just the Chain. But I found that the Sprocket was worn out more than I had expected, so much so that I had to hang it up in one place. I ignored the teachings of my predecessors and ended up having to do it twice. I laughed at my own stupidity, didn't I?
Was the one you received as per Image?
It is just like the Image. I was impressed by the clean cutting and the quintessential SUNSTAR, not just toothpaste.
Was the installation difficult?
Remove the rear wheel and remove the old Sprocket from the hub carrier and replace it. At that time, you should also replace the Hub damper to avoid having to do it twice. If you can do that, you are an intelligent person.
How was your experience with it?
I was able to firmly stretch the Chain. The subtle one-sided stretching symptom was worn from the altered wear of the Sprocket.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Parts that are going to be removed anyway should be replaced at the same time. I guess a fool like myself will repeat it every time.
View detail
Fits: SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650X, SUZUKI V-STORM250, SUZUKI ACROSS, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400V, SUZUKI BANDIT400V, SUZUKI BANDIT400VZ, SUZUKI BANDIT600, SUZUKI BANDIT600S, SUZUKI BANDIT650, SUZUKI DESPERADO400 WINDER, SUZUKI DESPERADO400 X, SUZUKI DESPERADO400, SUZUKI DESPERADO800, SUZUKI DESPERADO800X, SUZUKI GLADIUS400, SUZUKI GLADIUS650
Driveline Custom
[How is it used?
Large for weekend touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Unknown because I asked Shupp to do it, but I think it would be difficult for an amateur.
How was your experience with it?
At the same time, the front sprocket was changed to 15T and the chain was changed to DID Gold. This may be the reason that the fuel consumption is no longer less than 35 km/h.
[Included Parts:were they on?
Unknown.
[Was there anything that disappointed you?
I am satisfied with Large.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI ZZR1200, KAWASAKI ZZR1200, KAWASAKI ZZR1200, KAWASAKI ZX-12R, KAWASAKI ZZR1200, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZRX1200 DAEG
Fantastic visual
I bought this sprocket and DID 525 Chain for replacement mine. Perfectly fit and so satisfied with light weight & color. I think i gonna buy sunstar sprocket every time when i need. View detail
Rear Sprocket Replacment
This is almost close to OEM, the T52 rear sprocket is good condition, I fitted this parts on CBR250RR MC22 Also with the Front sprocket too, good to keep both working well. View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, YAMAHA NIKEN, YAMAHA YZF-R1, YAMAHA YZF-R1M, HONDA 400X, HONDA CB1300 BOLD'OR, HONDA CB1300 SP, HONDA CB1300SF, HONDA CB400F, HONDA CB500F, HONDA CB650F, HONDA CB900 HORNET, HONDA CBF1000, HONDA CBF500, HONDA CBF600N, HONDA CBF600S, HONDA CBR1100XX, HONDA CBR400R
520 for Conversion on the 2021 MT-09SP.
The Chain on my 2021 MT-09SP rusted due to forgetting to apply lube after cleaning, so I used this Sprocket as a 520 for Conversion while replacing it.
When selecting the rear sprocket, I thought that the Duralumin sprocket might wear out faster, so I also purchased the RACINGSteel, which seems to be more durable, but the Duralumin sprocket weighed about 310g and the RACINGSteel weighed about 870g, which was unexpectedly heavy. The RACINGSteel is heavier, and I thought that the Duralumin product would be better for the MT-09, which is characterized by its light handling, so I installed the RACINGSteel here.
If the Duralumin is worn out too quickly, I will replace it with RACINGSteel.
Installation is not particularly difficult, but there are holes at the same intervals next to the mounting holes, so if you want to install it, you can use these holes as well, so be careful when working in a dark place.
*I had seen on someone's blog that they had actually left marks where they had been installed incorrectly, so I thought no way, but I was about to actually do it when the sun went down on Blue Sky Garage.
After the installation, the synergistic effect of the front and rear Sprocket and 520 Chain was felt as the friction was reduced and the weight was lightened.
Specifically, when braking at low speeds with embracing the brakes, the car seems to move forward more than expected.
Also, when going uphill, I used to feel a little uneasy unless I was in 3rd gear, but now I feel like I can go uphill in 4th gear.
Unless you are a long distance runner or the latest SUPER SPORTS750 with 200 hp over, etc., I thought the Merit of lightness was Large, as the Duralumin product would hold up well there.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250X, HONDA XLR200R, HONDA NSR250R, HONDA NSR250R, HONDA NS250R, HONDA NS250R, HONDA NS250R, HONDA NS250F, HONDA NS250F, HONDA JADE, HONDA NS250F, HONDA JADE, HONDA JADE, HONDA JADE, HONDA JADE, HONDA XL600R, HONDA XL600R, HONDA XL600R, HONDA XL600R
Secondary reduction ratio change to high gear ratio
[How is it used?
FZS600 has the Largeest Torque of 6.2kg and Mission's 6-speed GEAR ratio is 1.074, which is enough for practical use but at high speed cruising, the car is running 100km/h at 5000rpm in 6th gear. I decided to change the front and rear sprockets and set a high geared secondary reduction ratio to lower the cruising speed a little more.
Was the one you received as per Image?
This lightweight Sprocket is anodized in Champagne gold. The processing quality is the most beautiful.
Was the installation difficult?
Since FZS600 is equipped with a center stand, the rear tire is floated, the wheel is removed, the Sprocket Nut is removed using the Impact Driver, the OEM Sprocket is replaced, the Nut is tightened using the Torque wrench, and the wheel is re-installed on the Swing Arm. Then, the Wheel is installed on the Swing Arm, the Chain tension is adjusted, and the work is finished. Even if you work at a leisurely pace, two hours should be sufficient.
How was your experience with it?
After changing the Driven Sprocket from OEM 15T to 17T and the Driven Sprocket from OEM 48T to 44T, and changing the secondary reduction ratio from 3.200 to 2.588, 100km/h cruising in 6th gear at 4000rpm became possible. Even with a secondary reduction ratio of 2.588, there was no lack of torque or difficulty in riding, and in fact, there was no jerkiness at low speeds, making the setting easy to drive and fatigue-free. However, the Axel is still too tight and the Axel opening angle increases, causing wrist fatigue, so we replaced it with an ACTIVE Throttle inner pipe 42Φ and compensated by making it High Solo. (OEM Throttle inner pipe is 37Φ)
In the case of FZS600, the fixing method of the Driven Sprocket is NutFixed Type as mentioned above, so both sides of the Sprocket can be used, making it more economical. (With the taper bolt type, only one side can be used.)
Also, the chain size was changed from the OEM 530 to 520 to match the front and rear Sprocket replacement to reduce weight.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I didn't notice it with the OEM Iron Sprocket, but the DuraluminSprocket has a GEAR squeal, or a squeaky operating noise. the Chain line is straight and not Gap, so is it a Material specific sound? It doesn't bother me that much during the ride, so I leave it alone.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CRF1000L AFRICA TWIN DCT, HONDA CRF1000L AFRICA TWIN, HONDA ADVENTURE, HONDA CB-1, HONDA CB1000, HONDA CB1000SF, HONDA CB1100F, HONDA CB1100R, HONDA CB400FOUR, HONDA CB750, HONDA CB750F, HONDA CB900F, HONDA CBR1000F, HONDA CBR400F, HONDA CBX1000, HONDA CBX750F, HONDA SHADOW600, HONDA STEED400
I wanted to give it a custom feel.
[How is it used?
City Riding &Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Not yet installed.
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1-R, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1-R, KAWASAKI Z1-R, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000
SUNSTAR is still a perfect circle
The front and rear Sprocket and Chain are replaced at the same time, so this may not be a review for Single Body, but for Large Body, I think the Chain Sprocket is replaced at the same time, so please refer to it…
As I wrote in the Chain Review, after the replacement, the push and pull of the Motorcycle became lighter.
This may be a Large effect of Chain, but I still feel that it is somewhat related.
I personally like the slightly understated Champagne gold look, which is very pleasing, not glaringly like XAM.
And SUNSTAR's unique roundness processing technology is also very reassuring for my mental health.
The durability is indeed inferior to OEMetc. steel, but it is a TradeOff of Parenthesis quality and lightness.
Compared to the removed OEM iron Sprocket, the lightness is overwhelming.
If you can agree with that, you will not lose anything by buying it.
I did the replacement by myself, but it is necessary to remove and install the wheel, so if you do not have a certain level of equipment, knowledge, and experience, it would be safer to ask a shop to do it for you.
View detail