Reviews
That's the car model Exclusive Design!
It is designed to be installed specifically for the car model, so it can be installed securely with Bolt On exactly.
Since it is lightweight and sturdy as it is named "Aluminum Carrier," it can be driven with confidence even if the Case is installed after each Base is installed.
When the Carrier is installed, the tip of the base is at the top rear of the Seat, so even if the Seat falls over, there is no need to worry about the Seat falling off, and this eliminates the need for maintenance such as battery replacement, rear fluid replacement, and tank removal. This is an excellent product that eliminates the need for maintenance such as battery replacement, rear fluid replacement, and tank removal.
If you must remove the Seat, it is recommended that you remove the Seat after removing the aluminum carrier unless you are prepared to risk the Seat cover being scraped and torn, or at worst, the Seat base being damaged.
In other words, if you have a Carrier, you will never do any maintenance or repair work on it! If you are not one of those people, you will regret buying this Carrier, so I won't recommend it to you.
Since the Carrier is designed for such usage, the user is also recommended to use the Carrier within the scope of the Manufacturer's assumptions.
Clearly Garbage.
View detail
Endurance for safety and security
Installed on XSR125.
I was not worried about the texture since I had used it in dax125.
Compared to the other company's product, the loadable weight is Large and it feels solid.
View detail
Rear caliper replacement
OEM is less noticeable due to the paint color and the beauty of the plating, Large change satisfactory. View detail
Rear Rack for Topbox: CB400SF
Delivery was prompt. Item came nicely wrapped in bubble foil bag. Instruction on how to assemble was provided in english. Installation was simple. The rack is stacked on top of the stock rear handlebar, eliminating the need to put aside the item. Overall this purchase is value for money. View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB125R
Carrier with Tandem Grip
[How is it used?
Motorcycle is used for commuting, so it was installed immediately after delivery.
Was the one you received as per Image?
As the Image shows, it is very firm.
Was the installation difficult?
It was easy if the temporary assembly was done according to the Instruction Manual.
How was your experience with it?
Tandem grip is useful when maneuvering
[Included Parts:were they on?
Everything was in order, no problems.
[Was there anything that disappointed you?
There is none
Other items that would be helpful
The installation points and hang points are to make sure to perform the temporary assembly according to the Instruction Manual and to make sure that the bolt on the Both Sides of the car is not damaged.
It is quite hard, so use a firm tool.
View detail
First Rear CarrierBOX
Unlike the Scooter, there is no storage space, which is also the fate of a naked motorcycle. I looked around to find a better looking frame for the carrier, and chose ENDURANCE because it seemed to have the most strength.
SHAD (Shad) I use it in combination with SH40. Based on the other's Impression, I judged by myself where Screws and Nuts are likely to loosen and put in 6mm Spring washers. I have not yet installed it on my car, but I am looking forward to seeing how durable it is.
Also the Instruction Manual for handling, but it is electronic and I have difficulty reading it, so I used my experience and installed it without the Instruction Manual.
View detail
Suitable for SV650.
The KIJIMA Rear Carrier that I had purchased before broke from the bent part of the bracket. I had a hard time to install it at first, but I found it easy to install after I fixed the collar and washer to the sub-bracket with super glue. When I received it, it was large and a little heavy, but when I put it on, I felt no discomfort at all. I wish I had chosen this Rear Carrier from the beginning. View detail
Fitting good
As expected of DAYTONA, installation is easy, and the manufacturing is good, so it can be easily installed in the Quantity.:I was able to set it up. I installed GIVIBox on this Carrier, which is rigid enough not to move even with a heavy load in the box. Because of its rigidity, it can be used as a handrail when moving the motorcycle. However, there are two drawbacks:first, the clearance between the carriers and the car body is narrow because the car carrier's mounting pipe frame is close to the car body, making it difficult to wash the car when washing it; second, the welded parts rust after a long time. I am generally satisfied with the product and have no complaints about the others. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125ThailandMODEL
SPTakegawaLargeRear Carrier
I wondered if it would be too large. I wondered if it would be too big, but it seems to fit nicely.
The bag is well made and even with the box attached, it is firm and solid.
View detail
![Special Rack [SR1168]](https://img.webike-cdn.net/catalogue/images/91664/19703_01_TS.jpg)
Simple construction
[How is it used?
Used to install a GIVI Box.
Was the one you received as per Image?
The Pipe diameter was thick and strong enough, just like the Image.
How was your experience with it?
GIVIMono-lock basePlate was also fixed firmly and was simple and well made.
[Points to note]
Quantity:Pair (for Left and Right) The two symmetrical parts were aligned at the back center and bolt-tightened.
The screw holes on the tire house side were a little difficult to align, so we installed it by picking up the four screw holes little by little.
How did it compare to other products?
No comparison was made.
▼Other than that... I tried to install KIJIMA's back support item number:210-4963.
The Shock absorber side of the OEM Carrier has a thin wall on the inside of the Shock, while the Shock absorber side of the OEM Carrier has a thin wall on the outside of the Shock.
The GIVI rack is thick-walled, and the thick flat washer on top of the Shock is removed and tightened with a cap nut.
The thickness of the plate on the Cap Nut side of KIJIMA's back support eliminates the screw space for the Cap Nut to stop.
It could not be installed.
View detail
It is very useful to put up a Case
[How is it used?
I wanted to install a Case so I could put my hand luggage in it when I commute to work.
Was the one you received as per Image?
Yes.
I'm sorry to say that I'm begging for something, but it would be perfect if there were not only black but also chrome plated as color variations.
Was the installation difficult?
The only work to be done is the removal and attachment of the Nut.
The DIY-loving woman worked alone, and the project took less than 30 minutes.
It would have been easier to work with one other person, but it was easy to work alone.
How was your experience with it?
The nominal value is supposed to be 6Kg load capacity.
I use it with Case + luggage weighing about 10Kg.
(At your own risk, of course!)
So far, I have had no problems with it.
If rattling, damage, or other abnormalities occur, discontinue use at that time.
It is hard to believe that it can only hold 6 kg, although it is also claimed to function as a grab bar.
We won't be responsible for any problems that might occur if you put something heavy on it." We have decided that this is an excecution from the Manufacturer.
→ or do you mean up to 6Kg of luggage that can be loaded when running Tandem?
[Included Parts:were they on?
Yes, I have. There was no shortage.
However, in order to co-tighten with the side bag support, an M8×65mm nut purchased separately was used.
The included M8×45mm Nut is unused.
[Was there anything that disappointed you?
None in particular. As expected.
As for the color variations, I purchased it knowing it was Black.
this Disappointing. would be missing the point.
Point and hang of installation
If you are used to customization and DIY, this should be obvious to you.
When tightening the Nut in installation, if you tighten a particular part too deeply at once, the Nut on the other side will not be able to reach the back. (For ease of installation, use the Quantity:Pair (for Left and Right) (This is because there is more space between the)
First, tighten the One Side nut loosely enough to prevent it from coming off, then do the same for the other side.
Quantity:Pair (for Left and Right) Both Sides, after all four Nuts have reached the back, retighten evenly etc., and gradually increase the Quantity:Pair (for Left and Right) I think it would be a good idea to fix them in such a way that the spacing between the
*It's hard to explain in writing…….
View detail
![[K TOUR] Rear Carrier](https://img.webike-cdn.net/catalogue/images/117047/80-539-13200_1_TS.jpg)
rear luggage rack
I am very happy and very easy to install. I recommend it. came fast. The packaging has been very good and well protected. The quality of the product is very good and very strong.
-------------------------------------------------- -------- I am very happy and very easy to install. I recommend it. Fast came. The packaging has been very good and well protected. The product quality is very good and very strong. Powered by Google Translator
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L
Trunk of DRZ 400
For installations and an additional tank with a capacity of 5 liters, the area of this trunk was used. The metal (thickness, strength) and shape of the trunk completely satisfied my requirements. The tests were successful. -------------------------------------------------- -------- For installation and an additional tank with a capacious 5l, a flattener of this trunk was used. Metal (thickness, strength) and the shape of the trunk completely arranged for my requirements. The tests were successful. Powered by Google Translator View detail
Fits: HONDA CRF250L, HONDA CRF250L RALLY, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CRF250L RALLY, HONDA CRF250L
It seems to be easy to use.
I felt it was a little difficult to install. View detail
Fits: HONDA Super Cub 50 Custom, HONDA Super Cub 50 Custom, HONDA Super Cub 70, HONDA Super Cub 70, HONDA Super Cub 90, HONDA Super Cub 90
Good appearance and balance
Purchased along with 53 Seat. It looks and balance are both great!
Two washers on top of the Rear suspension when installed (quantity):Pair (for Left and Right) Note that you will need (4 sheets in total).
View detail
It was a good shopping
The Carrier itself is not too large and is sturdy and of very high quality. The price is a little bit high, but I think it is a good purchase. View detail
First transaction
I am satisfied ------------------------------------------------ ---------- I'm satisfied Powered by Google Translator View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB125R
Can be used without problems
I think it is not cosmetic, but it is normal. The luggage Hook is so hard to use. View detail
Fits: HONDA Monkey 125, HONDA Monkey 125, HONDA Monkey 125 Thai model
Takegawa Black
It arrived today in Hungary. IM very happy, becouse in Europe I can not buy it. I look here very massive, and nice in my Monkey. I order first time from Webike, and ewerythink its very correct, delivery its very fast, it became one day earlier!!! My opinion, for the blue-silver Monkeys the black is the best!!
A bit in Hungarian, if someone like me would order from above. Not a rip-off page! I received what I ordered, I am very satisfied with it, the quality is excellent. I can only recommend them!!! The Monkey is a very specific vehicle anyway, and I found the best stuff for it here. Next up is a tachometer... --------------------------------------------- -------------- It Arrived to Hungary. I m very happy, Bucuse lin europe I can not buy it. I LOOK HERE VERY MASSIVE, AND NICE LIGHT MONKEY. I Order First Time From Webike, and Ewerythink Its Very Correct, Delivery Its Very Fast, It Becamed One Day Earlyer !!! My Opinion, for the Blue-Silver Monkeys The Black Its The Best !! A little in Hungarian if someone would order like me. No pulling pages! What I ordered was, I was very pleased with it, also a qualitative excellent. I can only recommend them!!! Monkey is a particularly specific vehicle anyway, here I found the best stuff. Next is the rpm ... Powered by Google Translator
View detail
Always in contact with the plating at the base of the RightBlinker
OEM Product with Style emphasis ?Grab Bar alternative,
I purchased and installed the Blinker, but it always hits the base of the Blinker during installation. I expected that it would escape firmly in the installed state, but as expected the Right remained in contact.
If you look closely, you can see that theQuantity:Pair (for Left and Right) The dimensions are not contrasted in
As per other reviewers, the accuracy seems to be poor depending on the lot.
I have an external Shock installed, and since the upper side is covered, I have to put up with it to prevent theft, but I would like it to be replaced with a good one if possible.
View detail