Reviews
Fits: SUZUKI ADDRESS110 CF11A, SUZUKI STREET MAGIC 110 CF12A, SUZUKI STREET MAGIC 110 II CF12A
It is the feeling betrayed thoroughly. They were parts which can be declared that the one purer 100% was Massey.
It is the feeling betrayed thoroughly.
They were parts which can be declared that the one purer 100% was Massey.
View detail
Fits: YAMAHA JOG [jog]., YAMAHA JOG-ZR [JOG]., YAMAHA JOG [jog]., YAMAHA JOG-ZR [JOG].
A suction noise is a little smallish for philharmonic power with a cover. There is merely little absolute quantity of intake air. If it can say and a surrounding cover is removed, it will inhale considerably. However, as a variable type, it is
A suction noise is a little smallish for philharmonic power with a cover.
There is merely little absolute quantity of intake air.
If it can say and a surrounding cover is removed, it will inhale considerably.
However, as a variable type, it is meaningless. -- Suction at the time of the maximum is past [ wrong ]. -- If it is this, the direction of a normal air cleaner calls it a suction amount, calls it the sense of stability in case of rainy weather, and also regards Power as good.
He has returned philharmonic power of a kijima who had stuck from the first after all.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Some bolts to fix are round and a wire adjuster has small rust. Or [ being reasonably priced ] ....
Some bolts to fix are round and a wire adjuster has small rust.
Or [ being reasonably priced ] ....
View detail
It is honest comment that clearance has not become at all. You took the die of the tank perfectly, and did it mold so that it might be suited? Double-stick tape is stuck that there is no crevice in the circumference of a pad flesh side, When the p
It is honest comment that clearance has not become at all.
You took the die of the tank perfectly, and did it mold so that it might be suited? Double-stick tape is stuck that there is no crevice in the circumference of a pad flesh side,
When the paper of double-stick tape was extracted and it stuck with exactly, having united the location with the sheet side lightly at first, and pressing down the fill opening side then, although it was going to unite with PITARI, the crevice was made at both side portions.
It is in the state where it has floated with POKON without the sheet side's stopping suiting shortly when it stops little by little from the stuck fill opening side, and being caught in the crevice between a sheet and a tank in order to take up the crevice.
While PITARI did not suit even if a few was before shifted from the beginning, or the root was stuffed into the crevice between a sheet and a tank and it united from the bottom, but redoing repeatedly, double-stick tape became useless and was not attached after all.
The double-stick tape of ? marketing will also be attached if what was necessary was just to have made it more smallish about 3 more~5 mm on the whole, and,
Although I think that I will carry out buying new one and sticking next without a crevice by giving up because the place [ of the joint of a sheet and a tank ] and fill opening side is stuck lightly, is it serious to remove ..., in advance the torn double-stick tape from a pad flesh side?
View detail
Before, when having ridden on the bandit 1200S, it had equipped. Since there was no money, it had equipped with buffing by private paint application. Attachment of attachment was completed also for itself comparatively simply [ those days ]. [ who
Before, when having ridden on the bandit 1200S, it had equipped.
Since there was no money, it had equipped with buffing by private paint application.
Attachment of attachment was completed also for itself comparatively simply [ those days ]. [ who was still a maintenance beginner ]
Although it is the effect ... Because it is made of aluminum, he is worried by reinforcement.
It stands and enters inside also in a GOKE grade.
honest -- (?) -- since it will fall, or it becomes and it enters inside -- the exchange only for 1 time (repair) -- it is necessary to carry out
Although surely the engine circumference is protected, considering cost and durability, it is the honesty ?.
Although charm is light to be sure, I think that it is not speaking if the reinforcement of a protector is low.
If it asks for robustness and defense nature and will search for an authentic positive one for lightness, we will recommend you to use a slider and the skid pad.
Although there may also be wearing in respect of looks exceptionally .... It is if a direction with a sub frame is good in that case?
View detail
An air zipper is not suited 22. It is an interval plug, if an air zipper is a male and a coupler is not a scalpel. It was deceived.
An air zipper is not suited 22.
It is an interval plug, if an air zipper is a male and a coupler is not a scalpel.
It was deceived.
View detail
They are three failures in four years. Since it was used by two sets, one piece broke down twice. Although I think that manufacturer correspondence is so so, the improvement is not carried out too much. It seems that a majority of the ones as
They are three failures in four years.
Since it was used by two sets, one piece broke down twice.
Although I think that manufacturer correspondence is so so, the improvement is not carried out too much.
It seems that a majority of the ones as most and me of the HID bulletin board of HP where an inquiry of failure is the same are also visible.
(Incidentally it is out of order now.)
It broke down before one year passed after repair ...
It is waiting for a manufacturer's correspondence now. It is safer to carry out a recommend, if they say that what is necessary is just to have for two years, but to hit something else.
Although HID of the absolute is incidentally used seven years this and that, he still has no failure.
The thing of the manufacturer who can place reliance after all is good.
View detail
It cannot carry out bolt-on to a pure blinker. The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad. First, it does not become useful, unless the lug which must n
It cannot carry out bolt-on to a pure blinker.
The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad.
First, it does not become useful, unless the lug which must not be in the portion which touches the case of the lens circumference is missing from 2-mm40 mm in die length in thickness and deletes those with two place, and this.
In addition, the cylinder portion which screws in a screw thread and becomes a female screw does not accomplish the business which compares pure and presses down the end of a passive reflector short 3 mm.
If it thinks that this product is a pure type blinker to the last, and is a kind of the raw material which has the necessity for processing in attaching, I will think that it is satisfactory.
The lens of a right orange is purity and the left is a kijima blinker lens pure type.
Although I think that it is not understood since the lug is deleted, the difference in the die length of a cylinder portion should be understood.
View detail
Fits: HONDA SUPER CUB 50, HONDA DAX, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA XR50R (for competition), HONDA SUPER CUB 50, HONDA solo, HONDA GIORCUB, HONDA CRF50F, HONDA Z50R
the worst -- Although the case was taken into pieces once again, the clutch body was also taken into pieces and it saw, since it did not go out .... the accuracy of the case in which a clutch plate did not come out -- it will be bad -- it is in a perfect
the worst -- Although the case was taken into pieces once again, the clutch body was also taken into pieces and it saw, since it did not go out .... the accuracy of the case in which a clutch plate did not come out -- it will be bad -- it is in a perfect adhesion state! Is the product check carried out before shipment??? He does not buy the product of 2 times and Coco. View detail
since the head was small, he seldom felt inclined to apply torque, but it is shut and crowded -- on the way -- come out, a motion becomes astringent and a screw thread becomes foolish -- also shutting -- it became impossible also slight looseness It b
since the head was small, he seldom felt inclined to apply torque, but it is shut and crowded -- on the way -- come out, a motion becomes astringent and a screw thread becomes foolish -- also shutting -- it became impossible also slight looseness
It became the panel of buying a nut splitter.
Since it is convenience parts, is it unavoidable?
Such an inaccurate screw is the first.
View detail
Fits: Others
The trial was carried out for many things and it did not operate perfectly. It may be a problem peculiar to a motorcycle. There is not any blinker pilot. Since the blinker lamp itself was in the legible location, he did not need to buy his own
The trial was carried out for many things and it did not operate perfectly.
It may be a problem peculiar to a motorcycle.
There is not any blinker pilot.
Since the blinker lamp itself was in the legible location, he did not need to buy his own motorcycle.
Please use direction reference under purchase examination.
View detail
A socket falls out too much simply. If a bolt part goes into a wrench 5 mm or more, even if it will bite overly and will try to pull out a bolt, it stops falling out. It is touch that it is the same even if it exchanges for the socket at hand, and
A socket falls out too much simply.
If a bolt part goes into a wrench 5 mm or more, even if it will bite overly and will try to pull out a bolt, it stops falling out.
It is touch that it is the same even if it exchanges for the socket at hand, and the pressure of POTCHI of junction is too weak.
View detail
When using it for the beginning purchased to carburetor adjustment and using it after half a year, it was not able to use was able to go the crack into the hose, Although the hose of the opposite gasoline which is not a part and is the whole hose is u
When using it for the beginning purchased to carburetor adjustment and using it after half a year, it was not able to use was able to go the crack into the hose,
Although the hose of the opposite gasoline which is not a part and is the whole hose is used, or the crack is using the hose now when it is a question, exchanging it for a commercial item, the O ring which is a cook is anxious.
View detail
Although he thought that he would use for the cygnus X for 08 years and bought it, it hits and has a close game to the feather of a pulley. If it will arrange if the angle degree is attached to a slight degree, but it does by force, the angle of a loc
Although he thought that he would use for the cygnus X for 08 years and bought it, it hits and has a close game to the feather of a pulley.
If it will arrange if the angle degree is attached to a slight degree, but it does by force, the angle of a lock wrench is missing.
It is the price about mind!
View detail
It purchased by saying that it is cheap with having written having said that it was light at a hybrid by the catalogue. Although surely a wound is attached to a car by Bello, a rubber foot, etc. and it is hot, a full-sized OFF vehicle is carried, or i
It purchased by saying that it is cheap with having written having said that it was light at a hybrid by the catalogue.
Although surely a wound is attached to a car by Bello, a rubber foot, etc. and it is hot, a full-sized OFF vehicle is carried, or it becomes, and is hot, using deflection mostly.
Although it was good in it being a little stronger, weight was also thought that there is no change like the ladder and difference of aluminum.
those who consider purchase from now on -- the ladder of aluminum -- strong -- recommend stripes -- the shin.
View detail
Fits: TRIUMPH DAYTONA675 [DAYTONA] TRIPLE, TRIUMPH DAYTONA675 [DAYTONA] TRIPLE
It is the second contribution. It is the impression after running a highway about 500 km. It interfered in the rear arm and the crack is contained in a protector. (Photograph: Red Mull portion) Vibration, heat, or the thing in which a fixing s
It is the second contribution.
It is the impression after running a highway about 500 km.
It interfered in the rear arm and the crack is contained in a protector.
(Photograph: Red Mull portion) Vibration, heat, or the thing in which a fixing screw loosens easily although it does not understand may also be one of the causes.
Since the effect on a price is not acquired, they are * zero individually.
View detail
Fits: TRIUMPH DAYTONA675 [DAYTONA] TRIPLE, TRIUMPH DAYTONA675 [DAYTONA] TRIPLE
Although mind by which the radiant heat to the right thigh in the waiting for a signal was reduced is carried out, since the heat transmitted from an engine to a frame remains as it is, it does not become a measure against heat of the knee~thigh at the ti
Although mind by which the radiant heat to the right thigh in the waiting for a signal was reduced is carried out, since the heat transmitted from an engine to a frame remains as it is, it does not become a measure against heat of the knee~thigh at the time of a knee grip.
(It is natural) If fixed distance is run although there is no telling whether to be that the heat insulating material melted, there will be a smell into which vinyl melted.
Since having removed was troublesome, it had left as it was, but it is before and after wearing and I did not understand the difference under run.
View detail
Since it was not an original manufacturer's product, it considered it better for a size to have a margin a little, and purchased the set thing. Since the portion to pinch is not twisting 90 degrees, it is painful, and cannot pinch and remove with a fi
Since it was not an original manufacturer's product, it considered it better for a size to have a margin a little, and purchased the set thing.
Since the portion to pinch is not twisting 90 degrees, it is painful, and cannot pinch and remove with a finger.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
The location of the mounting hole is shifted delicately and it was not settled well. It seems that a peyton place cares only about appearance and does not have pride about the accuracy of a product.
The location of the mounting hole is shifted delicately and it was not settled well.
It seems that a peyton place cares only about appearance and does not have pride about the accuracy of a product.
View detail
It had equipped before. Since the car body rotated centering on the skid pad when it fell on the right, it could roughly cleave and the engine stopped however, becoming useful from the engine block of the bolt equipped with a skid pad. However, si
It had equipped before.
Since the car body rotated centering on the skid pad when it fell on the right, it could roughly cleave and the engine stopped however, becoming useful from the engine block of the bolt equipped with a skid pad.
However, since the meter tank was unhurt by this favor, although it is bad, it does not generally become precocious, but there is no mind which I already attach.
View detail