Reviews
Large modification is required and out of the question as a vehicle-specific kit.
OEM Blinker cannot be installed as is.
The only way is to process this product or Blinker into a Large size.
It is not a Level that doesn't fit a bit, so if you buy it, you should be aware of that.
Incidentally, Webig's conformity guarantee does not cover this degree of processing.
Below is the response I received when I inquired about the conformity guarantee.
------
For more information about the conformity of this product in our company, please contact us,
If the four holes of the product can be installed on the Rear side of the vehicle through the Bolt, the product is considered to be compatible.
Fixing the above to the vehicle. Conformity Assurance The following is a summary of the results of the survey.
View detail
ZX-6R Fitment
About quality and texture : Machine work is nice with a good appearance About the feeling of use: N/A Products to buy together N/A Difficulty of installation : This does not fit the a 2019-2023 ZX-6R. This unit has multiple problems, the axle diameter is oversized at 27mm, rather then 25mm required for the ZX-6R. The anti-rotation arm to engage the swingarm lug is incorrect. If you align it centered on the axle, then the arm in angled up rather than being horizontal with the lug which will not allow movement backward and forward. If aligned on the lug, then the axle hole approx 10mm higher than it should be and about 5mm to far back. Cost performance and comparison with other products About shipping and packaging: Good Any concerns, cautions, or advice when purchasing: Don't purchase!!! Wasted money. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX636
Fitment Issue
About quality and texture : Machine work is nice with a good appearance About the feeling of use: N/A Products to buy together N/A Difficulty of installation : This does not fit the a 2019-2023 ZX-6R. This unit has multiple problems, the axle diameter is oversized at 27mm, rather then 25mm required for the ZX-6R. The anti-rotation arm to engage the swingarm lug is incorrect. If you align it centered on the axle, then the arm in angled up rather than being horizontal with the lug which will not allow movement backward and forward. If aligned on the lug, then the axle hole approx 10mm higher than it should be and about 5mm to far back. Cost performance and comparison with other products About shipping and packaging: Good Any concerns, cautions, or advice when purchasing: Don't purchase!!! Wasted money. View detail
Fits: HONDA CBR600RR
Complete design error
I installed the pad on a '07 model, but due to an obvious design error, the mount position of the brembocncCrab caliper is 5mm outward gap compared to the OEM disc diameter of 220mm, and the pad protrudes when installed as is.
The disc diameter of 230mm is not so common, and the only way is to shave 5mm off the disc contact surface of the pad and forcibly fit the pad to the disc.
There is no Caliper center, and the center must be adjusted by placing a Shim between the Mount section.
At any rate, it is not a Level product that can be sold.
View detail
Fits: YAMAHA YZF-R15, YAMAHA XSR155, YAMAHA MT-15, YAMAHA XSR155, YAMAHA MT-15
No instruction manual, inappropriate Screw length, unintelligible parts and no necessary parts.
It sucks! You should not buy it. There is no instruction manual, no pictures or description of the Parts. There is no shift arm for some parts that don't make sense, so you can't put it on. 。 In addition, the Stop-lamp code is used for the Quantity:They made me buy it at Set and I can't put it on.
I think this is a Manufacturer that the buyer will only regret. I will definitely recommend another Manufacturer because I need to purchase additional parts and I need to do a lot of processing by myself.
View detail
ZX636-2019 Rear caliper support
Mounted on ZX6R-2022
First of all, the diameter of the Axle Shaft is completely different! The angle of the Swing ArmCaliperStopper is too large for the Axle Shaft to fit through.
I managed to install it, but the Brake Pads were about 1cm outside the surface of the Rotor ….
Dangerous because it is a Brake round!
View detail
foreign-made
It was written in the description, but it was not Down by 30mm. View detail
Fits: YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15, YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15
No instruction manual?
There is no instruction manual.
I am not sure about the installation unless it is at least illustrated for local use.
Can you do something about it?
I can't even comment.
View detail
Fits: HONDA Rebel 500, HONDA Rebel 300, HONDA Rebel 500, HONDA Rebel 300
ABS error.
I bought it from a private importer before WEBIKE handled it.
The ABSSensor warning light always comes on around the 100 km/h mark.
It seems that the ABSSensor mounting position is gapped enough to be visually confirmed.
I ended up replacing it with OverRACING's (or rather waiting for it because I was on a production waiting list and couldn't get it) and the problem went away.
View detail
Fits: YAMAHA YZF-R15, YAMAHA YZF-R15, YAMAHA XSR155, YAMAHA MT-15, YAMAHA XABRE, YAMAHA V-IXION R155, YAMAHA XSR155, YAMAHA MT-15, YAMAHA XABRE, YAMAHA V-IXION R155
Mr. BigRotor? Missing?
When actually installed, the Brake Pads are not aligned enough to hit the Brake rotor.
If it was a BigRotor, it would work, but did I receive the wrong one for the BigRotor? I bought a brembo compatible Caliper from another place and it was useless.
View detail
WR3-Lowering-XSR155 2cmDown.
I bought it for 5cm lowering, but it is not effective because the installation pitch is the same as that of 2cm Down Link. View detail
Instruction Manual not included.
The lack of an Instruction Manual makes installation a little tricky.
Holes in DURACON are smaller than those in Bolt, so drilling is required.
Because the amount of threading on the Hexagon Bolt is small, the screw cannot be tightened enough and the slurry sleeve becomes free, so it is necessary to prepare a separate bolt with all screws.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA XSR155, YAMAHA YZF-R15, YAMAHA YZF-R3, YAMAHA XSR155, YAMAHA YZF-R15
Cannot be installed on XSR155.
Cannot be installed on XSR155.
You can win products for Handlebar Bracket.
View detail
Fits: YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15, YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15
It was impossible to tighten as shown in the picture.
Bolt to be tightened or Washer is missing View detail
Fits: YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15, YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15
Cannot be installed due to inadequate parts.
I am asking for installation instructions as soon as I buy the product, but I am not sure how to proceed.
After a few months, I haven't heard from them and can't put them on.
I took it to Motorcycle shop and they said, "Oh, we need more parts.
What about inquiries?
request a reply as soon as possible
View detail
Fits: YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15, YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15
Lack of parts and cannot be installed.
Tried to bring it to Shop to have it installed, but it contains parts, Bolt that cannot be tightened and cannot be installed.
Shop told us that they are missing parts.
The Bolt that attaches the steel back plate to the Right Side to the Engine has a Bolt that does not close.
As soon as I bought it, there was no Instruction Manual and I immediately contacted them with an inquiry, but they still haven't resolved the issue!
I was forced to go to Shop to have it installed, but there were no parts that could be installed.
View detail
not sticking (e.g. to)
It won't stick unless you process it first.
Screw, Bracket, all sorts of things.
Difficult without processing technology
View detail
Fits: HONDA CBR600RR
Defective product. It was a design error. I can't believe you put this product out into the world.
Defective product. It was a design error. I can't believe you put this product out into the world.
First of all, the height of the screw receptacle for the ABS speed sensor does not match the OEM. I had to prepare a 5mm collar by myself to install it.
Also, when I tighten up the shaft to the specified torque, I can hear the set screw of the blanket and the speed sensor pulsar rubbing against each other. The OEM blanket has a 1mm protrusion on the wheel side, but this product has a flat wheel side, so I think the height is not enough.
View detail
Fits: YAMAHA YZF-R15, YAMAHA XSR155, YAMAHA MT-15, YAMAHA XSR155, YAMAHA MT-15
The XSR155 does not come with it.
I have not checked other models, but if you want to install it on the XSR155, you will have to change the rear brake master or change the hose. Of course, there is no instruction manual for installation. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI Z800, KAWASAKI ZX-25R
Ordered in 2021/October, still not here.
Ordered in 2021/October, still not here. View detail