Reviews
It says the item has been shipped, but it doesn't specify the Yamato slip number, when will it arrive?
It says it's been shipped, but there's no Yamato tracking number on it, so I don't know when it'll arrive! View detail
I hope it will be delivered soon.
I've been informed that it's going to be in July, but I'm hoping for delivery as soon as possible! View detail
Ordered yesterday, paid, still no confirmation etc. I don't know when it will arrive.
Sound is cardiopulmonary, but there's no confirmation yet, so I need to hear from you. View detail
Complete failure of part across the weld
I purchased this exhaust from Webike in December 2020 and fitted it to my 2018 Honda Vision 110 in March after the Covid lockdown. Within two months of use it has catastrophically failed across the weld between the down pipe and the end can. Not good really when you consider the price of this premium product! View detail
Fits: HONDA DAX, HONDA CD50, HONDA MAGNA50, HONDA JAZZ, HONDA MONKEY, HONDA CHALY, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50
If you want to get the look, go with this.
I bought this product when I was lost in the Exhaust System.
The appearance is Parenthesis good because it is Short Tube.
And Reasonable price.
The sound is also very powerful.
good point
The exhaust sound is powerful and not like CUB.
American style Custom, I think it looks good on Chopper.
Parenthesis is good.
A bad point
Carburetor setting is difficult to get out. It becomes thin overall.
Due to the shape, Torque drops dramatically.
Noise for some people.
I think it's cool if it's a Chopper CUB or something like that, because Style and Finish are good Parts.
However, I think it is better not to think about the power up, and it is a choice whether the exhaust system is for the dress-up or the power up.
View detail
It's just a bad product.
The joint part of Silencer is an oval of 0.8mm, and the mounting hole of the Silencer and the Tandem Footpeg part which cannot be assembled is a product which should not be sold because there is a little Gap and it is not possible to install it straight and of course there is an exhaust leak. View detail
Disappointing product and service
First I was very pleased with the product and the sound it produced. After 2.000 km the exhaust broke on the weld of the flange that goes into the cylinder head. I tried to claim a warranty with WeBike. I sent several photos which clearly showed that the exhaust broke on the weld. After consultation with Yoshimura, WeBike offered to ship the exhaust back to Japan for examination. They offered to pay for the shipment to Japan but stated that they wouldn't be liable for any costs regarding the return shipment, customs, taxes etc. With all these uncertainties I refused to send the product back to Japan. I asked them to reconsider and sent new photos to show them even more clearly that the breaking is on the weld. All WeBike offered was a 1.000 Yen coupon. Very disappointing customer service and Yoshimura product View detail
Fits: HONDA MONKEY125
Not compatible with the company's Rear Sets
It can be installed in the normal step, but the
YOSHIMURA Step Kit X-TREAD which I installed as before (XTread) Cannot be installed in the same time
Please commercialize compatible Bracket
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
In October, the sales tax will be 10%
I'd like to buy it at the We-Big Yahoo store
I can't see it on my Homepage Why? Is it?
This does not come with a Point Please sell it at the We-Big Yahoo store
View detail
poor (quality)
I bought it with high expectations, but I was concerned about the overall manufacturing marks and
The exhaust pipe also doesn't seem to have the same level of attention to detail as the top manufacturers
Also, once the heat is on, Silencer is tightly addicted to it and cannot be pulled out, so Large Weird
I guess precision is appropriate This doesn't happen with other manufacturers
The Silencer is also new, but for some reason it is dented and cannot be replaced
I don't usually use it because it's embarrassing
This is an exhaust system that only looks like a third-rate manufacturer
It's the sound quality that matters, but it's worse than the OEM and the OEM sounds better during acceleration
The bass in Idling is only increased
It's a fairly quiet exhaust system, so it really just looks like it
It's like a manufacturer that only sells itself because it looks like nothing else
If you're feeling obsessive about everything, you'll find top manufacturers like Earls Gear and SP Tadao is good
The manufacturer's response was also very high-handed and appropriate for the customer's convenience Manufacturer
I don't know if I'll ever buy a product from
View detail
poor (quality)
I bought it with high expectations, but I was concerned about the overall manufacturing marks and
The exhaust pipe also doesn't seem to have the same level of attention to detail as the top manufacturers
Also, once the heat is on, Silencer is tightly addicted to it and cannot be pulled out, so Large Weird
I guess precision is appropriate This doesn't happen with other manufacturers
The Silencer is also new, but for some reason it is dented and cannot be replaced
I don't usually use it because it's embarrassing
This is an exhaust system that only looks like a third-rate manufacturer
It's the sound quality that matters, but it's worse than the OEM and the OEM sounds better during acceleration
The bass in Idling is only increased
It's like a manufacturer that only sells itself because it looks like nothing else
If you're feeling obsessed with everything, top manufacturers such as Earls Gear and Tadao Good
The manufacturer's response was also very high-handed and appropriate for the customer's convenience Manufacturer
I don't know if I'll ever buy a product from
View detail
Not at all
Bending is dirty with a PRESS trace attached. Machining accuracy is also bad, so it can not be installed properly. It seems that neither responsibility nor Pride exists for the production. View detail
Fits: SUZUKI ST250, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER
Cheap build quality
Looks great but less than a month on the bike and something has broken loose inside the muffler. No way to get to it without grinding away the welds. It's a shame because I was pretty fond of itm. Will be putting the OEM exhaust back on until I find something better. View detail
I'm sorry
Just because it is a very expensive shopping
It was a very disappointing result.
Also, to Silencer
Heat-resistant sticker to paste also
It is reflected in the image
It was not included.
I think that you should describe the item description in detail.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
View detail
Corresponding worst
Since the warpage of Flange of Exhaust pipe is severe, when asking for replacement, as a result of the actual car test, you can not get the exchange corresponded with good points of good quality, (test description explanation none) There is no choice but how to attach this is bad, etc. Comments are added!. I will not buy it again.. View detail
The worst correspondence!
Can not install by interfering with Engine. After checking, sending a picture and viewing from the top.
After checking, it is not possible to attach it at one point. If you modify it is charged. Confirm installation before ordering
Despite the inquiry, I was told that it is the responsibility there. If you ask me to return it
Things to bear 20%. Anyway the correspondence is bad with your eyes from the top! It is a problem before the evaluation of the product.
I am surprised that there is still such a place to respond.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
You can not do Fitting in the first place
I can not insert the exhaust pipe by interfering with the installation of the Down frame part of the Frame or the installation bracket of the Center Stand. (AAA spatula, Yoshimura cyclone, THRUXTONMegaphone Fitting confirmed)
It is not worth noting that it is not worth it, so one star.
View detail
Fits: HONDA ST90 (ST90), HONDA DAX, HONDA DAX70
this Chinese exhaust have a shitty welding job, my best advise is stay away from this, have a nice fking day everyone //.^
this Chinese exhaust have a shitty welding job, my best advise is stay away from this, have a nice fking day everyone //.^ View detail
No value worth the selling price.
First of all, when the assembly drawing shows the child's picture Level. (Lol)
And, as the picture shows, the O2 Sensor interferes and does not assemble.
Ekimani is a miscellaneous making.
Why is there a welding connection on the way why polishing marks are dirty. Gloss is spotty on the whole, disappointing.
Although I am also an Engineer, the selling price of such things is 5,000 yen is a good place.
"Silencer is silenced inside Silencer, not the type that uses Baffle"
Although it seems to be selling, two inside Punching metal are seen and it is the same as the Glass Wool packing. Poor missing.
It is not embarrassing, you can often sell such things.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25
Pramai Zero
Although I did not confirm it was bad, but in the image I attached the o2 Sensor but there was no mounting hole in the goods arrived! For the time being I'm wearing it for the time being I understand that the high speed range improved as compared with OEM. View detail