Reviews
Replace with new one
The one I had installed was old? The screw part and fixation broke off, so I bought it to replace it with the same one, a new one.
Design is not bad and the price is not that bad.
It is also nice to be able to use Communal to Left/Right.
View detail
Stable
We have been using the same Type for some time.
I bought this for a new one because it was old.
Stable Parenthesis goodness.
Wearing this Mirror,
From today, You too. GUN-CHAN of BALI DEN." Wouldn't it be a good idea to
View detail
You can see the back clearly.
It is used on a ZrX1200R.
I am satisfied with the Large change with good rear visibility and low price. 。
Recommended for those who don't like OEMs, but want to be able to easily see behind them.
View detail
I put it on at the store where I bought ape100.
I was wondering about the Plating type, but in the end I decided to go with Black. I don't think it is easy to see backward, but I am satisfied with the appearance. View detail
A classic product that has been around for a long time with peace of mind
[How is it used?
The separately purchased Tanax Napoleon On "Wing Bracket" I purchased this product to install in
Was the one you received as per Image?
The familiar design has been on the lineup for several decades, and the product was just as in the image, suitable for any motorbike.
Was the installation difficult?
It is super easy to loosen the Bolt where the Bracket goes through and tighten the Riot to fix it in the desired position on the Bracket.
How was your experience with it?
Design and visibility are good, range of motion is wide, no problems.
The color matches the Wing Bracket purchased separately. Plating version I bought the "Black" one, but I am slightly regretting that I should have chosen the "Black" one...
[Included Parts:were they on?
It also comes with a Standard shape Bracket, and did I mention that there is also a MirrorSingle Item product?
[Was there anything that disappointed you?
Not at all personal, it is a necessary and sufficient product.
0Other items that may be useful include
Point and hang of installation
If the bolt for fixing Mirror is loose, it may loosen due to vibration, etc. Tighten it firmly (it is better to check it regularly).
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but I think it is hard to find such an easy-to-understand product.
[Notes]
Not particularly
[ITEMS TO BUY TOGETHER
There is nothing special about it, but you will probably not get free shipping on this item alone, so buy the items you want from Others at the same time to get free shipping.
[Opinions and requests to Manufacturer
This is a classic product that has been sold for more than 30 years, and we look forward to continuing the lineup as long as Tanax Napoleon continues to carry Motorcycle products.
View detail
Mirror is easy to use, not too expensive and not too cheap.
I am using it for ZOOMER Mirror. At first, I was considering the more expensive Mirror sold by DAYTONA, but when I saw the actual Mirror at the store, I decided to go for it. Too expensive to fit on a moped." I felt that this was the best choice, so I decided to go with Mirror here.
The black paint on the Mirror's fixing screws tends to peel off easily, but it's a standard design at a reasonable price. It's cheap, so it's okay." It can be divided into
View detail
Installed on FTR223 with Right-angled Adapter
[How is it used?
Model used:FTR223
Period of use:About 2 years or so
Was the one you received as per Image?
As per Image, Style is good and the adjustment range is ideal.
Was the installation difficult?
It wasn't difficult to install, but since it was mounted on the Right-angled Adapter, the MirrorBody had to be removed from the Bracket.
It is also necessary to adjust the angle of the Bracket when it is attached to the Right-angled Adapter.
It took a little bit of work, but it was necessary to make sure it looked good, so we did it.
How was your experience with it?
The style also matched the FTR223, and the large size of the MirrorBody made it easy to see behind me.
Also, by installing the Right-angled Adapter, the angle can be adjusted more widely, making it easier to see and safer to drive.
However, the paint on the body was not of good quality. So I applied a good wax to protect the surface.
Since the body is solid, there was no decrease in visibility due to vibration.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Paint quality.
[ITEMS TO BUY TOGETHER
Although the style is slightly different, the Right-angled Adapter has a wider angle adjustment range, so I recommend it.
View detail
It's like they're less flashy than they used to be.
I haven't bought one of these in over 20 years.
The bracket is thinner than the old Mirror.
I think it was a bit more Firmly.
But now is the time of harmony. There is no point in complaining.
Simple Design remains unchanged.
It's easy to see the back too, and it definitely looks good on NAKED.
View detail
This is it for NAKED.
The OEM Mirror is similar in design to the AZ Mirror, but I didn't like it because it was too large, and being of the BALI generation, I went with the AZ Mirror. Visibility is good. (Thanks to Up Handle?). CB400SF before (NC31) Visibility was poor when I wore it on the The durability of the paint is not good. View detail
Exchange from OEM
This is a replacement from the OEM
The design is not bad, the view is easy to see, and it is good that the Mirror position can be fixed freely.
The price is reasonable and I like the fact that it can be installed Communal to Left/Right.
View detail
It is a good item
The visibility is as good as the OEM product, and the design fits well with NAKED.
The price is reasonable, but there are some things to worry about.
The color of the housing part tends to be dull.
As a countermeasure, I regularly use a glazing wax.
Thin paint film on Bracket area? Is it a problem of surface treatment? If you use it, the paint will float a little.
It's not so much that the paint is falling off in pieces.
View detail
Faded, but the style is great!
I replaced the OEM Mirror as it was getting rusty.
I tried using No Brand's Z2 Type Mirror before, but it was not a curved mirror, the field of view was very narrow, and the quality of the plating was terrible, and it lasted less than a month, so I wondered if OEM is better ……I replaced it with this AZ Mirror, and it's a good thing The results are disappointing in
For more information on Style, see "Let's rip the demons out of him in the afterlife. The performance is almost the same as OEM, but the visibility is wide and the usability is very good.
There are few drawbacks, but the Bolts for length adjustment peel off the paint a bit, and the UV light causes them to fade badly. (Black) is given.
Paint peeling may be a matter of course, but the fading can be cleaned up quickly with Wax, etc., so it's not a problem for me.
View detail
Fades a little fast.
Napole On's AZ is famous because it is installed on CB750F in a certain manga.
The real thing is cool enough, and I have no complaints about the field of view or height at all.
Black Painting will cause peeling of the paint on the part where the screw hits.
In addition, the color fading by the ultraviolet rays is intense, and if it is left alone, White-ish Color:It will discolor Gray.
This can be cleaned up with silicon spray or wax, but you have to be careful.
View detail
very good
The one I had on before was very hard to see, so I replaced it
It's quintessentially easy to see and the texture is very good
I can recommend Mirror
View detail
easy to read
The OEM Mirror that I bought from Motorcycle was rusting badly, so I went to the local supply store I went and bought it, it's a mirror with a shape similar to the OEM, so there's nothing special about it
I bought it and I'm the one with Chromium Plating, the condition and quality of the plating is good I think
I wipe it with Plexus every time, so the plating is still clean and no rust has occurred Visibility is good and it's not difficult to see while driving due to vibration
It's also good that it's easy to buy at supply stores
View detail
Simple
It is installed on the HORNET, which is made like a cafe racer
I'm happy with the old car style, not the pointy shape of today's cars
The details are also good, but the Black is a good example of a Mirror installation
The bars will have color peeling off in the movement marks Is the paint thin?
Mirror height is replaceable, no rattling, and the price is more than a minor complaint
I'm happy enough
View detail
I knew it
The same old design, easy to read and hard-working. z2Mirror Parenthesis is good, but for me, it's the same for all motorcycles are the Parts that change the Image at low Cost, right? View detail
good material
I installed with my Kawasaki w 800. The material has a clear view quality, with slight vibration when using high speed. Overall, I like this product very much. View detail
Importance of backward validation
The Honda VTR 250 and Cub 90 were good visibility of the pack mirror, but the address 125 G for commuting was not so good so I changed it to "Napoleon, the King of the Mirror". Just out of the mirror body about 2 cm will dramatically improve the rear visibility. You can see the next lane clearly. You can check the kitchen just by shifting your line of sight gently with your lane change, and some people say parentheses are bad because the mirror appears to protrude, but it is a minor problem compared to safety. I think that the best position will be found without fail because the adjustment width is very wide. Since it is lower than the normal mirror, scooters such as address are easy to see by adjusting with a high adjustment with the adapter. Although it is based on plus bis with 14 millimeters for fixation, even if it is not tightened particularly tightly, it will not become loose if you tighten it tightly. It is the king of a fluffy mirror. The only complaint is painting. I bought black, so I do not know about plating, but I feel that chorus will come out in a couple of years. Well if it goes out, it should come out and repair it with a spray. I would like you to use it gentle riders who are dissatisfied with the mirror of my car.
View detail
Excellent visibility
Vino (5AU SA10J) We mounted on.
Since I have Mirror Holder
Quantity : Pair (for Left and Right) Also 10 mm. Right Side also positive screw.
Mirror area is wider than Mirror of Company H
The backward visibility is outstandingly good.
It is also good to have less blurring due to vibration during running.
Angle adjustment and lateral protrusion amount are also easy with Plus screw 1 pc
It is good to be able to do.
As Common for Left and Right, even if One Side cracks due to falls 1 pc will be purchased
It is good to complete repair alone.
It is a wonderful Mirror for the price.
View detail