Reviews
Costa's strongest?
I had no complaints with OEMNormal step, so I replaced only the footpeg with HURRICANE's one.:Pair (for Left and Right) I decided to purchase this product because it was inexpensive with Type, which uses Normal pedal.
The included instruction manual clearly explained the procedure for replacing the Brake Side for ABS vehicles, so I was able to install it smoothly.
Repair Parts was fully supported, the quality was good, and I was satisfied with the better parenthesis.
View detail
REAL BALANCE Real balance Rear Sets Kit
It is a fairly cosmetic product.
There were no particular difficulties in the installation process.
Position also looked pretty good for my leg length.
In Circuit, it is easy to run without any discomfort compared to NORMAL.
Minus point is that the Plate feels a little anemic.
View detail
The price is easy to afford.
The price is reasonable and the appearance is satisfactory. View detail
Rear Sets
It was easy to replace and the position changed for the better, I'm satisfied. View detail
It is one of the few Modernization Parts
"Rear Sets" but in reality it is only 10mm Up
I think it's safe to say that the aim of the Parts is to secure the bank angle
I like the fact that it has a sharper look than the traditional competitors' products
The strength and durability of this product seems to be more solid than other companies' products I've used in the past
The one we got in June 2019 had the Footpeg base collar shortened by 15mm Quantity:Pair (for Left and Right) The width was controlled
(The previous product was a little too long.)
Also, the Bolt for Step bar installation has been changed from M10 to M8 It was
This will allow you to replace the M8Spec. with a competitor's M8Spec. with a Foldable Type Footpeg It is possible (Adjustments are required.)
The NS400/250 has no (less) footpeg collapse when tipping over and the Frame Since Damage is going, the exchange to Foldable is Recommendation
But that's why the Option Parts Change link kit (Catalogue It is not possible to install it (although it has fallen off)
(I wanted to use ChangeLINK, so I changed it to M10Spec (You have done so)
View detail
Fits: YAMAHA YZF750R, YAMAHA YZF1000R, YAMAHA YZF750SP
Cospara is good
I bought it by exchange as the fallopeg had bent.
Originally REAL BALANCE's Rear Sets were attached from the time I bought it in second hand, so the installation itself was easy
Position can also be selected from 4 places Material is also Aluminum I think that it is good as Cost performance
As a point of concern, it says that it is difficult to understand a slightly attached Instruction Manual and that Brake pedal needs some processing
I think that it is very good for those who want to enjoy a wide range of street rides to Circuit
View detail
It is COSPA's high Footpeg Kit
My Motorcycle (Kawasaki - Zr - 7) had OEM 's footpeg in a very low position, Corona and the tip of Shoes sometimes grounded on the road, so I wanted to improve, so I bought this kit. Since Zr-7 is out of print car and sold in few models, only the items listed here can be found in the dedicated Footpeg Kit. As many people wrote, Brand's footpeg diverts Pedals to OEM, so the price is kept low. I asked Motorcycle shop for installation. You can choose from 2 Position, but I am using it in the Large Yu person of the movement amount. Although it is long in the beginning of using, the use impression is good, the product itself is not cheap. View detail
By receiving in amount of money and a difference twisting, since like, it chose here.A feeling of operation is also satisfied well. Although the rigidity of master cylinder attaching plate is a slightly insufficient method of , since
By receiving in amount of money and a difference twisting, since like, it chose here.A feeling of
operation is also satisfied well.
Although the rigidity of
master cylinder attaching plate is a slightly insufficient method of
, since texture is not [ that it is easy to construct on the whole ] bad, either, it is pleasing.
View detail
Attachment by the same management as pure is possible in a Shift rod. The feeling of the Brake does not have the ambiguity of common treading in in external. Since a Plate will bend very well if it however breaks in with a thing with a regretta
Attachment by the same management as pure is possible in a Shift rod.
The feeling of the
Brake does not have the ambiguity of common treading in in external.
Since a Plate will bend very well if it however breaks in with a thing with a regrettable Design by the side of a Brake, rigidity is just going to be worrisome.
I think that the Shift side is good.
Since main Partses divert pure parts to some other purpose, functionality is maintained and, moreover, their Cost performance is good.
Good shopping was made.
View detail
the tension appearance of a NORMAL -- since the Step could not straddle easily when attacking a peak, the bottom purchased this product well received by a person besides . structure is good and is the Cost-performance highest. It was good to buy
the tension appearance of a NORMAL -- since the Step could not straddle easily when attacking a peak, the bottom purchased this product well received by a person besides
.
structure is good and is the Cost-performance highest.
It was good to buy it!!
View detail
It purchases an authentic positive one in order to improve, since the feeling is bad. In order to unite the Position with oneself liking, a Multi-step and a Back plate are used together. This combination was used supposing liking to make the Step in
It purchases an authentic positive one in order to improve, since the feeling is bad.
In order to unite the
Position with oneself liking, a Multi-step and a Back plate are used together.
This combination was used supposing liking to make the Step into the retractable type in consideration of the
automobile inspection, and a Repair.
Certainly [ although
work was easy, direction it prepared the Screw lock and the Grease ].
View detail
Many things were investigated by liking to also introduce a Back step after Separate-handle introduction and from before. The price was worrisome in No. 1. It is it being really cheap and being easy to introduce. -- since it is chea
Many things were investigated by liking to also introduce a Back step after Separate-handle introduction and from before.
The price was worrisome in No. 1.
It is it being really cheap and being easy to introduce.
-- since it is cheap again, and there is also no admiration on which he is skimping and it is made carefully firmly --
-- it is satisfactory.
Even when the after [
] BALIUS was pure, it was easy to carry out a Knee grip, but this is put in and there is touch which becomes more easy to carry out.
Appearance is a Cool after
.
View detail