Reviews
Fits: DUCATI 1098S, DUCATI 848, DUCATI 1098R, DUCATI 1198S, DUCATI 1098, DUCATI 1198, DUCATI 1098S
Ducati 848 zero gravity
Awesome fitting , came in late due to no production. But with the latest update always by webike , thumb up. Good quality. Will support webike again View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Sense of incongruity does not have a design in the flow of a car body, and the quantity to which a gap does not have attachment, either and a direct this barrel wind hits a helmet with involvement in the belly of the fit style exactly from an old product
Sense of incongruity does not have a design in the flow of a car body, and the quantity to which a gap does not have attachment, either and a direct this barrel wind hits a helmet with involvement in the belly of the fit style exactly from an old product decreases sharply. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
I think you should do an inspection..
Zero gravity's double bubble.. [Color] I had put Smoke on at the beginning, but the Helmet [Color] When I changed the Smoke, I had to change the smoke and my vision was poor [Color] I bought Clear
The product itself is very good and easy to drive I can recommend it
important point
There is a high possibility that the well nut (four) of Rubber has deteriorated (or has deteriorated) (I was), so you should buy another one [Color] I had a hard time getting the smoke off [Color] I didn't get stuck with Clear
When I applied Tension to the well nut when I removed it, it cracked
The hole that should be open was not opened The biggest problem is this:one of the holes to put the well nut in is not open because of a defective opening (at the top) It was After all, there is deterioration of the Well nut, and the upper two are operating without Screw Maybe I'll open it up with a pin vise when I get the nut...
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
ParenthesisIf you're looking for a good screen!
I want to change Screens from OEM to Screen!
If this is the case, I recommend Screen by Zero Gravity
What made you decide to buy?
I was considering several Screens for use in the Race, but I was surprised to find that Screens are It's expensive The same goes for this Zero Gravity Screen
However, the good thing about the Manufacturer is that it is available in a variety of shapes and I chose it because of its color I also chose it because it looks SMART
I've used it on other motorcycles in the past, so I chose this one
How was your experience with it?
This time the Double Bubble Type was installed on the YZF-R25
The reason for the double bubble is because it makes the air flow upwards and is easy to drive (laughs)
It doesn't look as good as other manufacturers' double bubbles I think this manufacturer even thinks about the appearance of the product It's not just about performance
Of course, the wind was generally shutting out when driving, so the effect is GOOD
Was it difficult to install? (In the case of hard parts)
It's not particularly difficult, as we just put it on the same way as the OEMs
What is the point or hang of installation (for hard parts)?
It's easier to install with a well nut, but more importantly, I recommend using a plastic screw and Some well nuts come with a screw of aluminum or something I used to use it on Race, but I used to use Tie Wrap to stop it I used to use it on my Race, but I used Tie Wrap to stop it
[Was there anything that disappointed you?
It wasn't the only time, but it seems that Zero Gravity's Screen has been tipped over I think it is often cracked when I do it I think it's just plastic, but I use it as a consumable
Do you have any wishes or improvements you would like to make for the Manufacturer?
I know it's hard to do, but it would be nice if they could keep the price down a bit more, Sticker and all Because there is none
[Do you have any products to compare it to?
OEM, Screen from ACRYPOINT
[Others]
Unfortunately, the image shows it cracked when it fell over, but I was able to use Tie Wrap for the attachment By doing so, I think that Damage was reduced to the smallest limit
This Manufacturer is a color [Color] Clear、Light smoke、 [Color] If you want to play Race because you can choose in Smoke [Color] I recommend Clear or Light smoke
View detail
Clear view!
It is a product I was curious about before.
Owner before Smoke Type
Select MRAScreen.
In Circuit driving,
If Shield is Smoke
If it is midsummer when you lay down with straight,
Sometimes it feels a bit dark vision.
Besides, Clear is easier to see.
Saying, ZERO GRAVITY products
Because I wanted to use it once, so Webike
I got it..
Replacement is very easy.
Also this time Screen bolt
I replaced it..
I actually ran with Circuit,
- You can see clearly when you lie down
(Almost nothing etc etc. The sense of Shield Only of Helmet)
- With Double bubble shape, the wind does not hit Helmet,
Flowing backwards (Although it is Image)
- There is a Custom feeling.
Some bubbles etc. There was, but it was part hidden by Cowl,
There is little distortion and clear visibility is available!
View detail
Made overseas
Unlike OEM's Screen, it is made overseas
The installation is sweet.
I think that there is never going off during driving.
Looks are the best!
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Quality of Top class in ThirdParty
Quality is different from similar Chinese screen. I do not feel distortion even if I see the scenery through Screen.
Just being high quality late expensive is inevitable, but if you are a little cheaper you would have taken the crown ^ ^;
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Extremely low installation accuracy
The first thing I bought was that the Large size of Well nut and Color's hole was the same, so I extended the Color part with Drill and broke just by inserting Color by hand. The second time carefully expanded the hole in the Large Strip, but the other four holes also have poor mounting position accuracy and can not be mounted unless Cowl is distorted. It is better not to be free if you have to correct all 6 Screw holes.
Also, the attachment part = the surface treatment of the invisible part is miscellaneous. Furthermore, Screen thickness and Cowl step are not coincident. I never purchased it if I was looking at the actual thing.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
1pc. Because it cracked, Quantity : 2pc. Purchase Set
1pc. Although we scratched the Color hole expanding and scratching so as not to break as in the other, the accuracy of the other four hole positions was also badly jammed and attached in a state where Cowl was slightly distorted. Others 4 holes can not be installed unless they are re-revised in reality. This is the first time Manufacturer with poor accuracy. It is better not to be free from the beginning if it is necessary to modify all 6 Screw holes. The difference between Cowl and Screen is also different. Surface treatment is also mounted position (Margin part = invisible part) The surface treatment of miscellaneous. I will not buy it twice if I see the actual thing. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Precision poor, brittle and fragile so be careful!
Because the Largeness of the color of the front two and the hole of the last 4 well nut are the same, if you insert the color holes of the previous two large with Drill and insert it by hand, just by inserting by hand, Screen cracks It was. Shock in an unused state. Material : Acrylic so visibility looks good, but it is easy to crack. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Sounds good
I used the same Manufacturer Standard until then
ZZr 1400 has low screen position Long touringetc. When traveling at high speed Helmet From the upper part to the shoulder As the running wind hits, it is not a translation I want to do but it was not comfortable
Double bubble can not attach Bolt position straight, but it is not bothersome with a little gap
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Very nice
As it takes a little time to install, I think that a day I can challenge myself is a day with plenty of time.
Side cowl - Inner panel - Remove Mirror and loosen the Upper Cowl and install it.
I found a video with Net, so I think that I could have made it Smooth.
If you clench the Inner Shield? Claw properly, you will have a gap on the Position lamp, and it will cause Wind Cutting sound.
The running wind of NORMALShield was around the chest, but I think that it is comfortable even in overtaking on a highway if it gets around to the neck in this Shield and lightly hurt.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Regrettable accuracy of Bolt hole position
Until now I was using STD TypeDark smoke of the same Manufacturer
Screen I chose Double bubble this time because it was good hole position and accuracy, but regrettable
Screen upper end Quantity : Pair (for Left and Right) There is a difference
Bolt becomes oblique as the hole position is not straight but tightened
There is a gap with Cowl
I am disappointed just because Standard was good
View detail
Valid for long touring
From July in Saitama to Longmi Cape in Blue Forest From Los Angeles to Long touring 1900 Km When I opened Wa Big on PC, this product suddenly appeared in Sale so I clicked In Stock 1.
That's right. It is a complete impulse purchase.
Personally because Motorcycle Custom places more emphasis on functions than it looks, Stepped Screen wanted me to try it, where the plan of this long-distance Touring and the plan BigSale happen to overlap and happily fitted.
Replaced with MRA 's STD Shape' s Clear Screen so far, the mounting accuracy was very good and the hole position Exactly.
There is little distortion with respect to the field of view through Screen, I do not feel Stress, but the view at night is still inferior to Clear. (There is no problem because it does not fly enough to lie down in Cowl at night.)
Clear flow effect contributed to Large. In STD Shape, feeling of being down on top of Tank can be obtained to a degree that rounds down his back and lowers his neck.
As for the processing of the end, MRA was Cut and it felt that Windscreen Mole was attached as it was, but here it is being processed to Beauty to the end and it is refreshing without the need to attach a mall.
The moment of impulse purchase "Oops I did it" I thought that it was good to purchase and actually buy it.
View detail
Fits: DUCATI 1098S, DUCATI 848, DUCATI 1098R, DUCATI 1198S, DUCATI 1098, DUCATI 1198, DUCATI 1098S
When looking at close, it is more awesome!
It is motivation of purchase that I liked the shape by looking at the image, but it is more awesome when I actually wear it.
There is no distortion and transparency is also wonderful! I am looking forward to see what kind of scenery can be seen.
View detail
Zero gravity Screen Double Bubble Type
Transfer from a certain Y! Ok Shop's 3500 Screen.
Unlike cheap waving surface or warped, there is no distortion so very clear view.
With Double Bubble Type, it is clear that it is not uncommon for height division.
Windbreak effect can be expected (Since it has not mounted yet since installing it, there is no running impression)
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Attached to YZF-R3
Since OEMScreen does not like shape, think that Race ish Forme is good and purchased this Screen.
Forme, both performance is satisfactory.
In OEMScreen, it felt that the straightened air felt against the neck, but after changing to here, it seemed to be a feeling that Large seems to be flowing around the eyes, and if it faces down, it will be cleaned up beautifully at the top of Helmet I think that.
Where dissatisfaction points were opened and inspected slightly whitening the wounds were observed in two places.
People who are interested may need attention though they think that they do not have to worry because they will be scratched. (Of course there will be individual differences,. )
View detail
It looks nice..
It looks good with Bubble type.
Windproof effect is the same as NORMAL.
There was no problem with mounting hole and accuracy.
It looks better than NORMAL and I am satisfied personally.
View detail
Feeling a good feeling
Although I was not particularly dissatisfied with OEMScreen, I also wanted to make Makeover that I wanted to raise windproofness more, so I decided to purchase this item as he went lost with other Manufacturer items.
After installation, I ran about 800 km including high speed but windshield is just one word. Running in the top row did not affect the wind at all in the normal speed range.
Somewhat shape with Habit (Appearance) I am doing it but I like it for now.
View detail
With fast Touring
I changed the Ninja 1000 in this summer, but I was considering replacing the upper body's wind hits at a higher speed than the ZX-14R and FZr 1000 that I was on. I got to this product with a good reputation for COSPA compared with various.
Just replacing the Bolt with 6 bolts for installation, the position of the hole was finished in 5 minutes as well as OEM. I changed appearance from Clear to Semi-smoke so it's fine to feel tightened. There are other good points for other Manufacturers, but this product is fully satisfactory.
View detail