Reviews
Conversion to Button cap bolt with Flange (Part 3)
This is the replacement of Frame coverMounting Bolt.
Normal is CS Plus screw with 16mm screw length + Lock washer + Large diameter washer.
Plus screw + Large diameter Washer made of SUS with 15mm screw length by Differential Gearォ of the shop which always asks for it now.
I decided to use FlangeButton cap + Large diameter Washer to match the Bolt conversion around it, but I chose 20mm because 15mm is too short.
Now, if you can manage the Plus screw of Air Chamber/Air cleaner connected DuctBand, you can do Access to Battery and Tank removal only with 4mmHEX.
View detail
Conversion to Button cap bolt with Flange (Part 2)
The seat hook fixed bolt is replaced.
Screw length 12mnm, Normal is still CS hex head Bolt + Lock washer + Washer.
Now, it's a SUS Hexagon Socket Bolt + Washer at the Defferential Gearo shop that I always ask for.
Cap bolt with flange is used here to match with the screw around it.
It is a Bolt with a wide seat Flange, so Washer reduction was achieved.
View detail
Conversion to Button cap bolt with Flange (Part 1)
It is the replacement of the mounting bolt of the air cleaner box.
Screw length 20mm, Normal is CS hex head Bolt + Lock washer + Washer.
Now, it's a SUS Hexagon Socket Bolt + Washer at the Defferential Gearo shop that I always ask for.
This Washer diameter was small, and it was bothered by the feeling of biting into the resin material of Air cleanerBox.
The purpose of this product is to reduce the number of parts and to hold the Air cleanerBox resin firmly by using only Button bolt with wide flange on the seat.
It will be 4mmHEX from 5mmHEX of Mr. Shop's Defferential Gearo, but it is not a place to tighten tightly, so it is enough.
View detail
For fixing the homemade Earth plate...
Because the South 0 parts store along the ring road that I often went to stock small things has closed ・・・・
I'm glad that these small parts are available from Webi.
[How is it used?
I used this to secure the Concentrated Earth plate to the Battery case. Wide seat...low head...this is what I wanted.
Was the one you received as per Image?
I bought three different lengths at the same time and there didn't seem to be any particular variation in quality.
How was your experience with it?
Wide seat and secure. Low head and OK to tighten even in narrow Spaces.I'm glad I had this.
View detail
EarthPoint, for backup...
[How is it used?
I used it for spare terminals to the concentrated Earth board. The reason for adopting this product is that it has a wide seat and a low head.
Was the one you received as per Image?
I've used it once, so it didn't take me off Image.
How was your experience with it?
The hex width of the standard For M6Cap bolt is 5mm, but this Button bolt is 4mm because of its low head.
This wrench size is sufficient for areas where a high tightening torque is not required.
The seat is wide, so if you tighten it properly, I think you can hold the object firmly, but
I use it with a Flange Lock Nut just in case I don't want it to loosen with vibration.
Earth plate is 2mm thick oxygen free copper, Flange Lock Nut height is 7mm, Screw peak is 3mm, so it is enough for EarthPoint.
[Was there anything that disappointed you?
Not at all... no.
View detail
Can be installed without a washer
I bought it with Meter's fixed Bolt.
Because it is sandwiched between Rubber, it will come off if you don't put a Washer on the Bolt.
I bought it because you can use the Flange bolt to install it with less washer.
It's useful because you can install it on the Smooth without dropping the Washer because it's a hard-to-reach spot.
View detail
It's easy to choose.
These bolts are hard to find at Home center, but K-CON KITACOConvenienceParts makes it easy to choose a size.
It would be great to have everything in stock.
View detail
Purchase
I bought it as a spare item. We also have a normal Cap bolt, but we use Button cap bolt with this Flange where Clearance is tough or where it's noticeable in normal Cap bolt. View detail
[a Webike Monitor] -- -- obtaining such things immediately, although it tends to be called one mere Bolt -- -- it is saved dramatically. Although used for a Number attachment Bolt, it is very pleasing in touch made into the Refreshing.
[a Webike Monitor] --
-- obtaining such things immediately, although it tends to be called one mere Bolt --
-- it is saved dramatically.
Although used for a Number attachment Bolt, it is very pleasing in
touch made into the Refreshing.
View detail
M6x12 is used for stopping the shroud and seat cowl of KSR. Although normal is a plus screw, since he likes and uses a hezagonal wrench, he tends to maintain this gentleman. Since it is a collar head, it is a recommend at sheathing, such as a fend
M6x12 is used for stopping the shroud and seat cowl of KSR.
Although normal is a plus screw, since he likes and uses a hezagonal wrench, he tends to maintain this gentleman.
Since it is a collar head, it is a recommend at sheathing, such as a fender.
View detail