Reviews
To calm down the raging 1st and 2nd gear.
Installed on CB250R 8BK-MC52.
The emboldenment at AxelOff in 1st and 2nd gear is pretty hard to get rid of.
I replaced them based on the impressions of our predecessors.
As for the installation, I referred to a lot of YouTube videos on the subject.
It's easy to remove the OEM Sprocket.
It takes hang to install a 15T Sprocket.
Chain on Sprocket and Bracket with off-ring clamps.
Fit and install in the Center of the Chain.
I had a hard time sending the Rear tire forward as far as it would go.
The ride feels less jerky in first and second gear.
Instead of not donning, when the Axel is increased and opened while driving.
The luck is a little worse.
I've never had a situation where the car blows up in 3rd gear and stalls in 4th gear when climbing a mountain pass.
It is now just fine in 3rd gear.
Motorcycle now has a slightly calmer character.
Somewhere in the impresario. Motorcycle by but
It will not be a separate Motorcycle.
CB250R is CB250R.
View detail
cheap
I was able to use it without any problems.
I'd be happy if it was a little lighter.
View detail
Cospa best.
It is for CBR but it was used for CRF 250L of the same Engine.
Rear sprocket 43T It is my purpose to return our Motorcycle to NORMAL,
It is cheaper to change Front from 14 to 15 T than to change Rear,
It is easy because Chain can be used as it is.
The installation went smoothly, but the Gasket made by Gold genre of Sprocket cover interferes.
So, I remove Gasket and attach Cover, but there is no particular problem.
I think that there are not many people who use these methods,
Chains now interfere with Chain Guide.
Because I was using Zeta 's Chain Guard Brace, I had some margin..
I am processing the Rubber part of Guide.
For those who run, there is no deterioration in fuel consumption at high speed cruising, and the interval between GEARs has become longer
I got to be able to run comfortably.
Next time I will change the Sprocket cover and I will see it..
View detail
It is not possible and not possible
Because Rear sprocket and Chain were getting worse, I did not wear it, but I thought that I will exchange Front sprocket as well. Buy this item.
The cheaper than XAM and SUNSTAR made it the deciding factor of purchase.
There is no conspicuous wear etc. after 6000 km, so it's not that it's cheap or bad.
Good goods of COSPA.
View detail
Item arrived Melbourne, Australia. within 1 week. Did not have to cut/join chain. just moved rear wheel forward, and 15T sprocket slipped straight on. Took me 30mins and I'm not a mechanic. Very Happy.
Item arrived Melbourne, Australia. within 1 week. Did not have to cut/join chain. just moved rear wheel forward, and 15T sprocket slipped straight on. Took me 30mins and I'm not a mechanic. Very Happy. View detail
Bought the 15tooth front drive sprocket for my cbr250r it came from Japan to England in a matter of days and fit perfectly and the quality was excellent. Would highly recommend this company if my experience is anything to go by. Once again THANKS KEN
Bought the 15tooth front drive sprocket for my cbr250r it came from Japan to England in a matter of days and fit perfectly and the quality was excellent. Would highly recommend this company if my experience is anything to go by. Once again THANKS KEN View detail
I would like to say that webike did a great job for best customer support and fast shipping. I ordered front sprocket for cbr250r 15t 14-08-2013 and received in Alice Springs, Australia 20-08-2013. It comes with box filled cushion to protect the item and
I would like to say that webike did a great job for best customer support and fast shipping. I ordered front sprocket for cbr250r 15t 14-08-2013 and received in Alice Springs, Australia 20-08-2013. It comes with box filled cushion to protect the item and even with bubble wrap. very nice package with foam in the middle to protect from rattling / shaking. The sprocket itself has very good finished product just like a genuine one and it fits perfectly on the shaft, driven it and my bike run smoothly...I would highly recommend, thanks japan webike... View detail
KITACO KITACO Drive-sprocket (for Fronts) 15 T product number : A 530-1818015 Front sprocket is set to 15T of KITACO, Attaching EX Color chain 106L520 (Red), a Rear sprocket is 42T of the Metal red of a SUNSTAR. Although there is probably n
KITACO KITACO Drive-sprocket (for Fronts) 15 T
product number : A 530-1818015
Front sprocket is set to 15T of KITACO,
Attaching EX Color chain 106L520 (Red), a Rear sprocket is 42T of the Metal red of a SUNSTAR.
Although there is probably no dynamic change so much since
authentic positive one are Front 14T and rear [ 40T ] ... The Chain and the Rear sprocket became coloring.
(I am glad)
It purchased that there was this KITACO Drive sprocket (for Fronts) 15T with the object for CBR250R by Mr. Web!ke.
Since the Engine of HONDA CRF250L with which I ride improves the Engine of CBR250R to off-road one from the first, this KITACO Drive sprocket 15T for HONDA CBR250R (for Fronts) can be used perfectly.
It is still although not exchanged... Putting the
expected value, comprehensive evaluation is ***** (five stars).
View detail