Reviews
Fits: YAMAHA VMAX , HONDA FTR223, KAWASAKI GPZ900R, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR400, YAMAHA VMAX, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MAJESTY250(4HC), YAMAHA YZF-R1, YAMAHA YZF-R25, YAMAHA YBR250, YAMAHA YZF-R1
Used for ybr 125
I wanted to replace the normal hose on my YBR125 after 20,000 km and to improve the brake touch. There are many cheaper products available, but we chose DAYTONA because we want to use a reliable manufacturer for the brake.
Purchased Type A 850mm. The banjo bolt is NORMAL and the crush washer is Copper Washer.
After the replacement, the tightness of the brake is much better than with NORMAL, and it is easier to control the brake strength. In addition, the lever position at which the brake is effective is quite shallow. (far from Throttle) The design is not too obvious and is very pleasing. The design is not too obvious, but it is a nice touch.
View detail
Easy to install and helpful
Replacing a 25+ year old Earls mesh hose with a new one.
I purchased the Kit for my car model.
Hose in NORMAL and Earls was a Type that branched off in the middle, but the one I purchased is a Type that takes out Double from MASTER.
It doesn't seem to necessarily follow the NORMAL handling.
So the handling of the hose is quite loud, but the quality is high and I am satisfied with it.
Lever touch feels a little softer due to the double output.
View detail
Cospar good
Purchased for Circuit use, with Bolt On installed and color selection, highly satisfactory. View detail
Fits: KAWASAKI Z900RS CAFE
Bolt On for each car model is a relief.
Touch is great, too.
The installation is perfect in length and banjo shape.
View detail
Brake line replacement
AF35DIO front area was swapped.
Used on AF24TACT Brake hose.
It's not so much about Control as it is about appearance.
I am concerned that the anodized parts are easily scratched.
Is it that it is faded?
View detail
Fits: SUZUKI SKYWAVE250 burgman
Installed on SKYWAVE250 burgman (CJ43A)
I could buy a cheap Chinese one for about half the price, but I didn't want to use anything questionable for the most important security parts, so I chose one that looked decent.
Although the product is claimed to be exclusive for each car model, it was short enough that we wanted 2 to 3 cm more. It would work, but there was no room for maneuvering.
It is good that the Instruction Manual for the appropriate car model is included.
The BrakeTouch is a mesh hose, and it is controllable without any squishiness, but the squishiness is also a margin of control, so a mesh hose that eliminates it is not for beginners. If you grip it like OEM, it suddenly starts working and locks immediately.
Also, it is difficult to bleed air after hose replacement, so it is better to leave it to a store if you are not accustomed to maintenance.
View detail
Brake hose
Parenthesis is good, but the anodizing is too weak and it peels off when tightening. View detail
Brake hose
It looks good, but if you inevitably close it a little too tight, the Anodized will peel off. 。 I prefer a regular hexagon. View detail
Touch will be better!
I used it on my hrc grom jc92. it is not equipped with ABS so the job was relatively easy.
The grip, which used to be a bit gnarly, is now much firmer.
It feels as if the Brake Pads are firmly pushed by the grip.
It is also easier to control, so it is a Recommendation.
View detail
I'm satisfied
This is my second purchase of this product! I've seen many mesh hoses that look like they've been customized, but this one is my favorite because it's simple and doesn't stand out too much.
It is good that not only Aluminum but also Stainless Steel can be selected.
View detail
Touch improvements were grasped.
Braking distance could be shortened. Performance Improvement Items I'm not, but Brake's Touch is closer to my taste (Brake's Touch has a preference, so I dare you to try it). Better." (I will not write "I am not a member of this group.")
Since it is used for W650, it is inevitable due to the characteristics of the one-effect 2 Piston Caliper. Let them grip and make it work." It tends to be the Touch of Brake in the direction, but this is not my personal preference, and I wanted to tend to stand up and go from the initial movement.
The Caliper structure has not changed dramatically, but it is much closer to my favorite Touch than the Rubber hose in NORMAL.
Also, since it is a smoked hose with a stainless steel fitting, the brake hose does not make a statement, and it blends in nicely.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB
Touch is better!
Touch is improved and the grip feels firmer.
The installation is vehicle-specific, so the required parts are in quantity.:It comes as a Set, so there is no need to buy more, and it is easy if the Cowl can be removed.
The air bleed was a little Large strange.
View detail
![Vehicle Exclusive Rear Brake Hose [HBF1056]](https://img.webike-cdn.net/catalogue/images/52568/FPS03_K0001_TS.jpg)
Fits: DUCATI M900 Monster 1993-1999
About the Banjo Angle
I don't know about the overall evaluation of the component as a whole, as I haven't used it yet. The Banjo itself has a slightly different angle, but more importantly, the angle of the Banjo's Crimp to the Hose is not as flexible as it should be, as the Hose itself is very rigid, and the Hose cannot be installed as OEM. View detail
A little longer than OEM.
MotorcycleI decided to make a Swage line at least once in my life, The look." When Improved Work Experience" I bought it only for the Hose, and since Caliper is also overhauled, I don't know if the Hose is a boon or not, but BrakeTouch is now light and controllable. View detail
Order by length
It is good to be able to place an order for the right length.
The replacement is done from Brake fluid, so it takes a little time and effort, but it is good because it changes the appearance and operability.
View detail
This is a change from Swage line
I installed it on MainMotorcycle's XJR1300C.
Originally, it was Hose with Brembo master and Swage line,
The fitting part was too large for my liking, and the fitting was Stainless SteelSilver.
All black change of Goodridge to make it pure black.
I like Goodridge because the Fitting part is quite Stylish.
The only thing is that the Banjo bolt and color on the Release side must use OEM.
If you want to make everything Stainless, Swage line may be a better choice.
View detail
Mesh brake hose
Cosmetics are bad, but BrakeTouch, effectiveness, and performance are perfect. View detail
Rear Mesh hose
I had longed for a mesh brake hose! View detail
WireMesh
Unusual for WireMesh. [Color] Smoke
Brake hose is fixed.
Expansion rate is also set to Touch with Small Sakura Snap
View detail
Good quality and performance
Installed on a Yamaha MT-09.
SwegeLine was a very satisfactory Mesh hose with good texture and BrakeTouch.
The Instruction Manual is included, so I was able to install it without hesitation. The length and fitting are just right.
At the same time, the Master Cylinder was changed to a YamahaYZF-R7 RadialPump, but the hose of the Master Cylinder is 90-degrees different between the MT-09 and the YZF-R7, so the hose could be installed smoothly by routing it through the outside of the front fork. Therefore, it was possible to install the hose smoothly by routing it so that it passes through the outside of the front fork.
View detail