Reviews
Quite high quality
We have not taken into account what happens in the event of a fall from the beginning. (If it is just a standing fall, the Pannier and Frame Slider will be grounded, but not the Swing Arm.)
Therefore, although there was a cheaper Axle Slider that was a little smaller, I chose this product because I wanted a red undercarriage accent (since the wheel's rim tape is red, I wanted to unify the undercarriage accent in red).
I am satisfied, although it seems a little too large.
It would have been nice if Bolt was the same color, but I think I should have painted that much myself.
Incidentally, the compatible car models on Webike did not include the GSX-S1000GT, but the SPEEDRA webpage included the GT, and it could actually be installed without any modification.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
I don't know if I'd do a Repeat.
Buy Luster Ari twill weave
The overall texture is fine. However, the corners of the [Color] Clear bald? Chips? And also, the whole thing is twisted (is it inevitable for carbon products?). Therefore, when viewed from the rear of the vehicle, the rear end of the chain cover is hanging toward the center of the vehicle.
The supplied Bolt is used to join the product and the OEM Chain CoverBracket (steel, cobent shape), but the screw length is not long enough and the screw does not reach the UNut's looseness stop (the supplied BT is TrussM3×8L, but 10L is necessary).
In addition, one OEM clip was reused to attach to the Swing Arm, but the mounting hole of this product was processed with a thick wall as well as the BT, so the clip length was insufficient and could not be reused (in the end, double-sided tape was used to attach to the Swing Arm, and the Chain Cover (In the end, it was attached to the Swing Arm using double-sided tape, and the Chain Cover itself was attached to the Swing Arm using reused OEMBT in two other places, so it was judged to be large and sturdy).
Also, not related to quality, but when installing this product, the OEM Chain Cover and OEM Chain Cover Bracket must be removed (the OEM Chain Cover Bracket is reusable), and the Rivet is fixed in two places. I think it's much easier than using a drill to remove the Rivet.
Material for several units of Magical racingetc. so far.:I was more disappointed than the above points because I had been using Carbon products and purchased this product with that feeling. If it had been 10,000 cheaper, I would have been satisfied, but if the price is almost 30,000 and the quality is this high, I will refrain from buying it next time.
View detail
It is a quality that makes it a Repeat!
The quality was identical to the product photo.
I bought a Manufacturer's first, but returned it because it fell a few steps short of the sample.
Comparing the two, Speedra would win except for its weight.
In terms of quality, it is close to HondaOEMOP's Dry carbon, and I guess the weight is the same etc.
It's more than twice the price, though, and since it's Matte, it's a plain girl.
After all, Material:Carbon Style beautiful here.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000SF BIG1, HONDA CB1100, HONDA CBF1000, HONDA VFR800 RC46, HONDA VTR1000F FIRE STORM, HONDA X4, HONDA CB1300SB, HONDA RVF750 RC45, HONDA VFR750R RC30, HONDA VFR800F RC79, HONDA VFR800X RC80
Lever means Large
The effect is overwhelmingly stronger compared to NORMAL. We recommend lever replacement before MASTER or BRAKE HOSE. View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It looks Cool.
Purchased as points were accumulated,
It's just a look, but it's Cool's.
I think it is nice because it is in your line of sight when you are on it.
Simply apply it after cleaning and degreasing with Parts cleaner.
View detail
Fits: YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3
It is good for dress-up.
Good for Dressing,
Note that the screws on the YZF-R25 are easy to lick,
Use the + for #1.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
The atmosphere has changed.
I've always wondered if OEM Silver could do something about it.
I purchased the twill weave glossy this time.
I was also worried about the matte Dry Carbon, but I thought that if I was going to buy a matte one, it would be cheaper to put a Carbon Seat on it, so I decided to buy the matte one.
I am satisfied with the change in atmosphere.
I'm going to take the Rivet out when I remove it, and I was wondering if a 3.2mm Drill would be better….
3.You can go with 5mm, but it's a little thicker…?
I don't have a problem with it.
I think 3mm is thin and hard to remove.
Also, it would have been better if the price was a little lower.
View detail
Sober Cool Products
I bought the twill weave matte finish. It is very easy to install, just take off the NORMAL one and replace it with the new one, which is a small one, so the replacement is not very noticeable and does not have any effect. It is a completely self-satisfying product, but that is what makes it so cool. View detail
Mounted on a Can-Tan, it is Cool!
I purchased the twill weave matte finish. It is easy to install, just remove the NORMAL parts and install them in the same way. For me, I am satisfied with the Large product. View detail
Fits: HONDA CB400SB VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CB400SB VTCE REVO, HONDA CB400SF VTCE REVO, HONDA CBX400F, HONDA CBR400F, HONDA CB400SS, HONDA Rebel300, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA STEED600, HONDA STEED400, HONDA SHADOW750, HONDA SHADOW600, HONDA SHADOW400, HONDA SHADOW1100/1100Classic
I am satisfied
It was a replacement for a Reasonable product from another company, but the texture and movement of the actuator were incomparably better. View detail
Fits: KAWASAKI ZX-9R, KAWASAKI ZZR1200, KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI Z750, KAWASAKI ZX-12R, KAWASAKI ZX-10R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z800, KAWASAKI Z750S, KAWASAKI Versys1000, KAWASAKI Versys, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI ZX-6R, KAWASAKI NINJA400
Three! LOL!
Gold was used for the G-type, but since it was so new, we did not transplant it.
I decided to go with Black because of the delivery time, but as a result, the Rear area has been tightened up!
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR, DUCATI , HONDA , KAWASAKI Z800, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR
The texture is elegant.
I bought it just for the looks.
The quality is good and I have no complaints.
View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Carbon Wind
I am happy with the tightened look.
The work is also easy, just paste it on.
It would be better if it were cheaper.
View detail
The coloring is also good.
It's a bit pricey, but the Anodized color is great and it's one of the best products for hiding holes in Frames. View detail
Fits: YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ1, YAMAHA FZ1 FAZER, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TMAX560/TECH MAX, YAMAHA TMAX530, YAMAHA MT-10, YAMAHA MT-09 Tracer, YAMAHA MT-09SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25/MT-03
That's what SSK is all about!
[How is it used?
Used for Tandem or Dress-up
Was the one you received as per Image?
Was the installation difficult?
It's easy
How was your experience with it?
Good looking compared to OEM
[Included Parts:were they on?
None
[Was there anything that disappointed you?
A little overpriced?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
It is a natural assertion without feeling like it is a Cover (can be installed on the '24 model).
I was thinking of replacing the Mirror with Other Brand Product sooner or later, but when I got on the car and saw the visibility and the difficulty of adjustment of Other Brand Product etc. in the Review, I thought OEM would be fine and decided to replace the Mirror with Other Color.:Unpainted resin parts are SPEEDRA's Carbon parts, and the '24 model has been installed with no problem, so I installed the Mirror cover as well.
The one we purchased has a twill weave glossy finish in combination with other parts.
I have an impression that the type of parts that are put on the OEM Mirror is like a cover for the car dress-up parts, and I thought that I would not install it if there was any discomfort after the temporary fitting, but the material is carbon and thin, and you can see it around the moving part of the Mirror at the base. However, the material is thin and you can see it when you look around the Mirror's movable part at the base of the body.
The fitting also has some areas where the OEM Mirror is not fully hidden, but there is no particular sense of discomfort, so it was installed as is.
Installation is as simple as degreasing the OEM Mirror, covering it, and securing it with double-sided tape, but be careful not to break the cover, as you must spread the area around the Mirror's movable part while inserting it.
When I looked at the product, there was a hole at the bottom, so I wondered what it was? I wondered what it was because I saw a hole in the bottom of the product. I wondered what it was, and then I realized that OEM Mirror also has a hole for drainage?
The holes are not perfectly aligned, but they are in a functional position, so I think fitting will not be a problem.
The appearance is glossy, but it is not so strong, and you can appeal Carbon casually.
If you can't give up OEM visibility but still want to be Fashionable, this is for you.
View detail
Appeal degree is high
Installed on a 2022 MT-09.
The OEMFender was short and I thought it was not good enough, so I replaced it with this part.
The glossy twill weave Type was selected. Although the replacement does not change the driving performance, the appearance is improved and the satisfaction is high.
It is also good to be able to choose 4Patterns, glossy or not, twill weave or plain weave, according to your preference.
Even beginners can work easily by simply removing the OEM-fixed screws and clips and returning them to the same fixed locations.
View detail
Easy to install and easy to use
[How is it used?
Purchased for the custom look.
Was the one you received as per Image?
I felt it was better and more three-dimensional than it looks in the picture.
Was the installation difficult?
It was very easy to install as it was exactly the same shape as the OEMCover.
How was your experience with it?
Although the change is only for appearance due to look custom, I am satisfied with the change.
[Included Parts:were they on?
ManufacturerSticker is the Quantity:1 pc. and Installation Instruction Manual are included. Installation can be done easily by following the instructions.
[Was there anything that disappointed you?
If the part is a Quantity:2pc. I would have been happy to have two Stickers as well, since there is a Set.
Also, for better or worse, the Material:It only becomes Carbon Style, but the atmosphere by the shape change is the same.
View detail
Fits: HONDA CB400SB, HONDA CB750, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB250F, HONDA CB400SB, HONDA CB400Four, HONDA CB400SB, HONDA CB250R, HONDA CB1000R, HONDA CB1300ST, HONDA CB1300SF/SB, HONDA CB1100, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA NC700S
Rolling and realization, Damage reduction.
I stepped on an Oil leak in Corner and fell down slippery…...
I was worried about Damage to the vehicle.
The footpeg is shaved off the footpeg.
The important parts of the Frameetc. were intact.
Thank you. You saved my life. (T-T)
View detail
Dress-up effect
This product covers the connection between the Frame and the Swing Arm, and can be installed in a quantity.:Pair (for Left and Right) It is easy because you only need to sandwich the Cover from the Bolt with the Bolt.
The 1000GT is not listed as an applicable model, but I got it because it has the same Frame as the S1000, so I assumed it would be able to be installed.
It was easy to install as intended. To be safe, Screw lock was applied during installation.
After installation, there is no difference between the color of the cowl and the large size, so a sense of unity has been achieved.
View detail