Reviews
The condition of the packaging of the product is questionable, but …
It was supposed to be new, but some of the corners had been scraped off and the substrate was visible.
Silver would not bother me at all, but since it is Red, the underlying Silver is a concern.
It may cost more, but the material of these items must be packaged individually, or there will be bound and scraping due to contact.
I would like to see quality commensurate with the price.
View detail
Compromise with Titaniumium color
[How is it used?
To hide the hole after removal of the sub-frame
Was the one you received as per Image?
As shown in the picture. Good texture.
Was the installation difficult?
It is easy to use because all you have to do is plug it in.
How was your experience with it?
Fitting good. can be Accent.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Initially, I wanted to buy another Manufacturer's product in silver tailoring.
However, we were told that production was undecided, so we had to settle for a color here that was close to ours.
Cooperative. design and color disappoint.
Other items that would be helpful
Installation Point or hang Just plug it in/Instruction Manual Yes/Easy to understand ◯/Cautions None/Items to be purchased together None/Opinions and requests to Manufacturer Silver color, Polish and Plating lineup are desired.
View detail
THESimple
It's not bad.
I think the Ducati Performance is better looking design-wise...
Pricey!
Once installed, it is simple and comfortable, but a little sad.
It is good for those who like simplicity.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
To improve appearance
Bolt, I was concerned because of the full view of the Nut.
Installed to prevent Rust and improve appearance.
However, the Frame Hole Plug is silver compared to the FrameBlack, so that part stands out a bit.
It is very easy to install.
It would have been even better if there were other colors available.
Recommended
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
It will be One Point, but not much Recommendation.
One Side is falling off as described in the other impressions. As a countermeasure, do not over-tighten the bolt, and apply a thin coat of Screw Loosening Stopper + Bond for Grip to the rubber part to prevent it from falling off. We do not recommend this product because the price is too high, but it is easy to fall off. View detail
Quality is good
As can be said for all of YOSHIMURA's products, the quality is often better than that of other companies.
I like this product and the texture.
I had to wait for a while, but I happened to be able to purchase it in stock.
View detail
Speedra Frame cap
I bought the frame cap because it gives a more custom look than without. I like the color. View detail
Speedra Frame cap
It's just a Cap, but the color is bright and it gives a custom look. I just don't know about the durability yet? View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Why is there no OEM Product?
The Frame hole has been on my mind since I bought the car. I would have been happy if you could have added more color selections if possible… I have installed it with color by myself a little. View detail
good
It has a luxurious feel to it, but it is easy to pull off. I'm worried that it will come off when I'm running. View detail
Hole Cap for CB1000R(2022)
Too much expensive, i would rather make same thing used by 3D printer... haha akward View detail
It takes a lot of force to fit them in.
Good appearance and texture.
I don't know if it takes hang to fit the product, but you have to put a lot of effort into it to get it to fit.
View detail
New products by SPEEDRA
Installation takes less than 5 minutes and is as simple as pushing it in, but because it is so easy, you may have to be careful not to have it stolen.
The parts are just a cap on a plain frame hole, but they are like a puzzle piece that fits in the right place, and the parenthesis is very simple, but the body of the car is very tight;
The colors available are Black, Red, Gold, and Green Light, so you can coordinate your favorite colors with other parts, which is also attractive and fun.
View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Moriwaki pivot shaft stopper
Hello That's why I'm writing a review This product is Moriwaki's pivot shaft hole cup The original version is plastic It bothered me that my bike was flat After changing to Moriwakisa's hole cup, the bike became refreshing It would be nice if the gold color came out, too Anyway, I recommend it Thank you for WeBike, where you can always buy good products I hope your business thrives. View detail
To casual Custom
I have been customizing with MORIWAKI products since I took delivery of my new car a month ago.
I felt like I was getting a great deal because I had a few Big Points from Weig, so I ordered it and it arrived the next day.
I installed it right away, but it was a very easy job, only removing and replacing the original OEMCap, so it only took about 5 minutes to complete.
It is a custom made only for appearance and is completely self-satisfying (sweat), but it has become a very good Parenthesis because of its detailed manufacturing.
View detail
I like that it doesn't feel any different!
[How is it used?
For plugging holes and for self-sufficiency.
Was the one you received as per Image?
It was different from Image in a good way.
The size of the visible portion, Large, is the same for all four, and the size of the inner plate is LargeSmall.
This is how we accommodate the upper and lower holes and also stop them from coming off.
Was the installation difficult?
There is no problem. The size of Plate inside is Large, the foot is more (under) For.
How was your experience with it?
The inner plate is expanded by tightening the bolt to prevent it from coming off.
I am satisfied with the appearance.
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100
Good product
I think the texture is very good.
I would just appreciate it if the price was a little lower!
View detail
Highly textured, self-satisfied, but wonderful.
[How is it used?
A handy Custom is now available for One point of Frame.
Was the one you received as per Image?
It was more textured and well-made than I expected.
Was the installation difficult?
Just push it in tight.
How was your experience with it?
I am very proud of myself, but the impression has changed completely.
The Original is Plastic's Cover, which I think gave it a high-end feel.
[Was there anything that disappointed you?
Not particularly
The QR code on the box allows you to read the Instruction Manual.
View detail
Frame cap
The Kitaco frame caps are a nice addition to the overall look of the bike. They were exactly how they are pictured. Easy install. View detail
I like Simple.
Among various manufacturers and colors, we chose a plain and simple one.
I like it because it's NORMAL looking and SIMPLE!
View detail