Reviews
Dress-up8 Insulation 2, since the Frame wasn't that hot to begin with.
The shape is the same as Rye TEC and the accuracy is the same as Rye TEC, but you can choose Rye TEC for plain weave. View detail
The effect is not so good.
First of all, it was easy to install, but as the description says, the product is not as perfect (quality) as it should be because it comes off in parts.
As for the driving, the GSX1300R HAYABUSA was still a hot mess in the city.
On the highway, the effect cannot be measured because it was originally not in a state of heat hell even before it was installed.
All of our GSX1300R HAYABUSA friends have installed A-TECH products, and we recommend them because they have a good fit and a reputation for being highly effective, and they are much less expensive.
The only drawback is that it is a popular made-to-order product, and when I inquired about the delivery date, I was told that I would have to wait 4-5 months.
Since the time of purchase was summer, I weighed the heat hell of the GSX1300R HAYABUSA against this product, which was in stock and delivered immediately.
I feel like it backfired on me...
View detail
Purchase due to excessive Frame heat.
Purchased for a 2012 s1000rr.
There was no floating of the frame cover, which I was worried about, and I was able to pimp it with double-sided tape.
Before I installed the Frame, it was so hot that my thighs felt red from the heat, but after I installed it, I did not feel anything.
View detail
I am glad I purchased it.
I ride a New Model GSX1300R HAYABUSA. I purchased this product to prevent heat buildup on my inner thighs when waiting at traffic lights or in traffic jams and in contact with the Frame. The other day in traffic (Meter outside temperature 34 degrees Celsius), the heat was considerably reduced. I could not touch it with my bare hands before installing it, but after installing it, I could touch it with my bare hands. (I am personally glad that I bought this product. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA XSR900
You can hide Frame's somewhat worrisome Point.
The back side of the product was not included in the product photo, so I am attaching it.
I would have liked it even better if it had been truer without the lettering, but it is slightly raised.
The installation is done by turning the hexagon in the middle, and the diagonally cut Pipe at the end of the hexagon expands to fix it.
It may be better to retighten it occasionally.
View detail
very good at writing
I bought this as a mid-summer measure for my GSX1300R HAYABUSA, which has a crazy hot Frame.
It is usually dangerous because the Knees grip becomes hard even at spring temperatures.
The effect is so insulating that it can be felt.
Of course it's hot, but you don't need Pants with Heat Guard to get a Knee Grip and it's Large sturdy enough for a full day of riding.
Fit feeling is also no problem as it is OEM, and installation can be done by anyone as it is just a matter of attaching it with Tape.
The appearance is satisfactory for me to look at by myself. No one has ever noticed it.
View detail
Purchased for heat and appearance.
I bought it for the heat and to change the look.
My wife, who doesn't know much about Motorcycle, didn't see me put it on, but when she saw the GSX1300R HAYABUSA after I put it on. What? You changed this place too?" I realized that (Lol)
So the change in appearance is immediately apparent to the beholder, isn't it?
The work is a lot of double-sided tape, so it's a bit odd to peel off the film. (Lol)
Also, the Clutch Side is a little harder to stick than the Brake Side, so you have to be careful or the Large Side might look strange.
View detail
Guard rear master cylinder
I bought it to Guard the Rear master cylinder as much as possible.
The design is rugged and can be attached to SEROW without discomfort.
The Edge of the corner was standing up quite a bit, so I chamfered it with File.
We put several sheets of washers over the frame to get a clearance between the frame and the washers, and then attached a rubber board to the gap between the washers and the frame to prevent scratches and to act as a cushioning material.
I was worried that the radius of the Rear brake was quite close, so I shaved it off a little.
View detail
Beware of O-rings
Parenthesis has improved, and I'm generally happy with it,
After a few months, the O-ring deteriorated Quantity:Pair (for Left and Right) I noticed that they were cut off one by one.
If two O-rings on the Clutch Side break off, they may drop out.
Please note
So I re-fastened it with a thin needle Gold.
View detail
How effective is it?
I like the look of it. So far I don't mind the heat, probably because of the cooler temperatures. I'm wondering how it will be in the middle of summer. View detail
The appearance is more important than thermal protection.
I am satisfied but it is expensive.
It would have been 5 stars if the upper part of the Oil Filler Cap could be covered.
It's not Carbon, but Carbon-like.
I think it looks better Parenthesis.
View detail
Required for OffRoad course driving.
[How is it used?
Practice run at OffRoad course.
Was the one you received as per Image?
Yes, Material:It is beautiful in aluminum and completely covers the rear master cylinder.
Was the installation difficult?
The instruction manual makes it easy:apply the included RubberCushion with Double-sided Tape to the points where the Frame and Guard come into contact.
How was your experience with it?
I am glad I installed this because I use my ankles to hold the car body. As you can see in the picture, it rubs a lot, so I would recommend this material over the OEM plastic frame cover.:I think Aluminum will last longer.
[Was there anything that disappointed you?
None
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
For Smooth Shift change
There is a hole on the left side of the frame for attaching the swingarm, and the work boots would often get caught on the convex part of the hole, causing shifting errors (this may not be a problem depending on the finish of the outer side of the boots). (This may not be a problem depending on the finish of the outer side of the boots.)
I happened to see it installed on a vehicle of the same model that I saw, so I ordered it and installed it.
Hexagonal Wrench was used for part of the installation, but most of the installation was completed by tightening Tie Wrap and cutting the excess part with Nipper.
After the test ride, I confirmed that the ankle grips are easier to do and the snagging of the Boots has been eliminated.
However, when removing the Swingarm for servicing, it must be removed because it is in the way, and a new Tie Wrap is needed in that case.
I don't know how durable it is, but it makes it easier to ride and I appreciate the product.
View detail
Fits: YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer
R&G Boots Guard Kit for MT09 Tracer
This was the second part of the wife's bike protection effort. We already had the tank grip/protector in the basket and found the boot guard kit for her MT09 Tracer here on Webike too. As you know, if you ride with good motorcycle boots, they do have a tendancy to rub the ,frame in places. It's just how it is. These boot guards are a perfect addition to help prevent this and also give a good look to the frame in general. Even though you will probably never need for them to be grippy, they are anyway with a kind of sand paper feel about them. I have used R&G products before and they do know what they are doing when it comes to protection. All their products just fit, there is no having to trim anything as they make each kit specific to YOUR bike. As we already had the tank grip/protector in the basket, we added these boot guards. Becasue we had other items in the basket for the order, the courier cost was very good value and spread out over the entire purchase. It is a lot cheaper to have more than one item to ship that haveing multiple items. EMS fast is hte service I used this time. Their delivery is always within a week and this is even the case over a weekend. My order arrives to me in the UK in 5 days flat. ALl the items in my order was packed really well and neatly in side the outer box. Webike warehouse even seal the box on all the edges so nothing can be lost in transit. The package was also filled with extra bubble wrap in any empty space so there was also no damage from items moving around inside the box. All arrived 100% perfect. These boot guards are nice and flexible and easy to fit, I always mark the guards or what ever protection u against the surface I am going to attach to using a white pencil on various edges. This measn when I come to installing, I know they will be in the right place first time. Probably easier ways but this works for me. The instructions tell you to lightly heat the surface and pad with a heat gun, I found that a hairdryer did a great job as my heat gun was elsewhere. Just take your time and you will be just fine. Very happy with the final result. Event he wife is happy. Brilliant, thank you Webike View detail
Bitter Bitter X-GRIPFrame protector
Material:It is plastic, so the texture is not that great, but it is sufficient for the purpose of preventing scratches on the Frame.
The rest is attached with rubber, but it is so tight that it will not fall off easily.
View detail
High quality, as expected from ZETA
Motivation
With the purchase of WR250X, I purchased these to prevent the Frame from fading due to rubbing by the Knee grip usually at the ankle.
Was the one you received as per Image?
Emboss processing (ZETALogo) etc., high quality of appearance.
Was the installation difficult?
DIY installation
Some frame guards from overseas cannot be installed unless they are stopped by a large resistor or tie wrap, but this product is bolt-on and has no distortion of the bolt holes.
To install the Guard, simply remove the Yellow and Orange screws and install the Guard.
The area where it meets the frame may rub against it, so I inserted a rubber plate about 2mm thick in the upper portion.
How was your experience with it?
It looks good fitted, but Guard does its job well.
[Included Parts:were they on?
Included Parts other than Body:None
[Was there anything that disappointed you?
None in particular
This time, I was able to buy it at a lower price with my accumulated Points, so I felt like I was getting a Large-change deal.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
If you're a stickler for dry carbon …
First of all, the shape is different from the OEM.
There are no holes in the OEM plastic mounting area, so it is held in place against the Frame.
I think there are individual differences, but the one I received had a gap in the hole position, so I extended it and installed it.
Just like with Rear Fender. [Color] Clear paint and Garbage are also awesome.
You can see it if you look at the chili together and away from it from a distance.
The polish also leaves the Paper eye stiff, and it feels like it is stroking a flat surface.
If you can rework it, it is good for Base.
View detail
It looks good, but how durable are the fixtures?
I installed it on a Black Frame with a Red color.
It's been about 3 months now, and the ProtectorBody seems to be fine, but I haven't done any Dirt running or Hard running at all yet, but the Rubber to fix it to the Frame (?) was degraded and Crack was found in it.
I pulled it lightly with my finger, and sure enough, it snapped. I looked at the other fixed points and found a similar crack on the rubber. I checked the other fixation points and found a similar crack on the rubber.
At first, I went to Home center and got an O-ring of about the same size and replaced the one that was cut off.
I wonder if it is the heat? If it persists in the future, I will consider another fix.
View detail
gaudy
It looks a little cheap. It has a dress-up effect in its own way, but the plastic model looks like a plastic model for the price, so there may be differences in likes and dislikes. View detail
Easy to install
I had an OEM Frame guard on, but it was a little too cheap, so I bought a ZETAFrame guard.
Ankle grips on forest roads are very easy and stable.
It is easy to install and is a recommended Parts.
View detail