Reviews
Replacement of Mirror bolt from other manufacturer
[How is it used?
The Mirror bolt made by another company was cheap and seemed to rust easily (or rather, it was lightly rusted).
Was the one you received as per Image?
Polished than expected with Chrome plating.
How was your experience with it?
The most polished of all the surrounding parts, it even floats a little.
[Points to note]
nothing special
How did it compare to other products?
It may be expensive for a bolt, but it comes with a washer and is of good quality. Even if it is expensive, it is only a few tens or hundreds of yen, and I am satisfied with this product.
View detail
Looks good, but, well, invisible. (Lol)
Was the installation difficult?
Easy Custom that anyone can do.
How was your experience with it?
I think Mirror's position can be determined quite precisely, so it is one of the more visible of the invisible ones.
[Included Parts:were they on?
Comes with 10mm→10mm and 10mm→8mm Spacer.
[Was there anything that disappointed you?
I'm sure it's an individual difference, but the paint is slightly thicker or thinner.
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB, HONDA CB1300ST, HONDA CBR650R, HONDA CBF1000, HONDA CBR1000RR, HONDA CBR1000RR SP, HONDA CB1300SB, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-10R, KAWASAKI Ninja1000SX, KAWASAKI Ninja1000SX, KAWASAKI Ninja1000, KAWASAKI Ninja1000, KAWASAKI Ninja650, KAWASAKI Ninja650, KAWASAKI Ninja650
Tanax mirror
Mirrir is of great quality and will not.vibrate when rising. Clear mirror images. Large enough to see everything before changing lanes. View detail
Cross 2 (Ray Save) impression
[How is it used?
From city driving to touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
PON Level
How was your experience with it?
Very easy to see compared to OEM
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
None so far.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Cross 2 (Ray Save) impression
[How is it used?
From city driving to touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
PON Level
How was your experience with it?
Much easier to see than OEM
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
(after the -te form of a verb) not ..
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
This is a must for off-road mirrors!
I bought this for the root dress-up when I replaced the Mirror on my CRF250RLY50 with a DRC161 off-road mirror.
This product is sure to increase the overall Off-road feel.
However, when using CRF250's 161 off-road mirror, it is necessary to pull the mirror up as far as possible while expanding the upper part because the mirror's foot part is too short to tighten the fixing bolt if it is installed as it is.
New Material:Since it is a Rubber product, it can be spread out quite well, but it is considered that sufficient care should be taken to avoid the possibility of it being cut if it is spread out too wide.
View detail
Just right for Scooter.
Good angle adjustment for the price.
I was concerned about visibility due to Design priority, but visibility is not as bad as I expected.
Note that the angle adjustment on the Mirror side and the bar angle are not stepless.
View detail
Adjust Mirror position
Spacer is included to accommodate multiple handlebar diameters.
Because of the Spacer of the genus Gold, it may damage the Handlebar in some cases.
Convenient for adjusting the angle and position of Mirror.
View detail
Fits: HONDA CBR650R, HONDA CBR650F, HONDA CBR600RR, KAWASAKI Ninja1000, HONDA VTR-F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI Ninja250SL, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZZR1400, SUZUKI GIXER SF, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R125
Perfect fit for my bike
This item has a lot of parts to fit different motorcycle. Installation is very easy and the instructions are easy to read. But if you buy, you need patient to install and setup. View detail
Tanax is polite, but Webike...
The Mirror I received had initial quality problems, so I contacted the Manufacturer, Tanac, directly, and they responded quickly and politely with a Large change favorable response. On the other hand, the distributor, Webike, has not contacted me for 5 days today. When I called, they were curt and only responded by email, so you should be wary of Webike. View detail
Good
I bought this in time to get my MHR inspected. it was easy and helpful as I am not so stubborn as to drill holes in the Cowl and install the Vitaroni Mirror.
I am not interested in a Bar end mirror on a daily basis, but it would be perfect for a vehicle inspection. The width of the car needs to be applied for change, but I don't particularly care, so it is OK.
The Mirror itself is easy to see, but the joints and spherical joints seem to be reluctant to move or become stupid at a relatively early stage.
View detail
I finally got there.
I tried many things but finally arrived at the right one.
Vibration is the same as OEM, no more vibration than DAYTONAParallel mirrorHexagonal.
The most important thing is that it is easy to see, and although it is not as good as OEM, it is good enough. It is easier to see than DAYTONAParallel mirrorHexagonal.
It would be better if I could choose a normal color since it is a bit purple, but I think it probably makes sense, so I'm OK with it.
I was happy to see that it also comes with tools and a Cap to fill in the Bolt holes.
View detail
Mirror Replacement
I had been thinking about replacing the Mirror on my 750KATANA because it was sometimes difficult to see depending on my riding position.
I am very satisfied with the new design, which makes it much easier to see without destroying the atmosphere of KATANA.
View detail
Mirror Replacement
I had been thinking about replacing the Mirror on my 750KATANA because it was sometimes difficult to see depending on my riding position.
I am very satisfied with the new design, which makes it much easier to see without destroying the atmosphere of KATANA.
View detail
Off-set Holder 45 was better.
[How is it used?
Used to improve visibility of VTR250OEMMirror.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Angle adjustment is troublesome, but not difficult.
How was your experience with it?
Off-set Holder 45 was also purchased and compared.
It works well at 30, but 45 was better.
[Was there anything that disappointed you?
None in particular
[Opinions and requests to Manufacturer
It looks a little wild.
I would like a Mirror that can be placed forward without this.
View detail
Fairly easy to see.
[How is it used?
Used to improve visibility of VTR250OEMMirror.
Was the one you received as per Image?
As per Image
Was the installation difficult?
The angle adjustment was troublesome, but not difficult.
How was your experience with it?
Moving the Mirror forward has improved visibility considerably!
[Was there anything that disappointed you?
None in particular
[Opinions and requests to Manufacturer
It looks wild.
I would like to see a Mirror that can be placed further forward than the OEM without this.
View detail
Refreshingly, the Mirror position is lower and the viewing angle is wider.
When the Center Stand was set up, it did not look that different, but the Side Stand of the INT650 is much shorter than other models, so the height of the Right Side Mirror is extremely noticeable.
I wanted to replace it with a shorter Mirror, but even if I find a small, good-looking Mirror, most of them are not Japanese Vehicle Inspection Correspondence products from 2018 or later.
However, this product is a Japanese Vehicle Inspection Correspondence product.
So I could choose with confidence.
When installing the INT650, an adapter for the Opposite Thread Screw is required because the screw hole in the RightMirror is an Opposite Thread Screw.
For installation, 19mm and 17mm Wrench are required.
The texture of the plating is nice and not cheap, and I am also satisfied with the functionality of the Mirror viewing angle.
However, when held, MirrorBody is Material:Plastic is lightweight and has no sense of weight, so it feels a little cheap there.
I have to touch it to understand.
When asked if I would recommend it, I can confidently recommend it to others.
View detail
MT25Left Side
250, but with a perfect Size feel. View detail
Mounted on MT25
It looks good. I love it. View detail
condition is good.
so nice~~^^
Shipped accurately and shipped quickly.
I will definitely purchase here the next time I purchase.
I would like to sell genuine Honda and HRC products together.
It's hard because I can't find it no matter how much I search for it. --------------- It's so good ~~ ^^ It was delivered correctly and quickly delivered. I will buy it here next time. I would like to sell Honda and HRC products together. No matter how much I look for it, it doesn't come out. Powered by Google Translator
View detail