Reviews
Fits: HONDA GORILLA, HONDA MONKEY
Required for Carburetor setting
Packing is essential for carburetor setting, etc., which requires multiple carburetor body roses.
Quantities, since rubber packing usually dies when opened and closed before aging.:It might be nice to have at least 2 Sets.
View detail
Among the many that are out there.
I chose this product to get Chain Alignment since I changed the Chain of MONKEY125 to Seal chain.
The reason why we chose this type is that there are many types of this type from various manufacturers, but the Screw that fixes the Sprocket to the Material:Plastic, and that was the criterion for our choice.
It is not a good idea to get scratches, no matter how hard it is to see them.
I got a 40cm Aluminum rod separately because the Aluminum rod was too short according to the reviews from other seniors.
I think it is cost-effective if it is mentally satisfying, although I think it can only provide a comforting adjustment.
View detail
Pimping to 12V square eye CHALY.
Fit is perfect.
Small is not wired.
The fact that it is made of glass is also an added bonus.
Chinese LEDs are installed on these to ensure brightness.
We had a good shopping experience.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
The footrest for Monkey
I bought a footrest for a Honda Monkey, I really liked it because it is made of aluminum and is not adjustable - the length of 19 cm is what you need. It came up without any problems, the installation is fast and easy. The price and quality are minimal. I recommend it to everyone. I bought a footrest for the Honda Monkey, I really liked it because it is made of aluminum and is not adjustable - the length of 19 cm is just right. Fits without problems, installation is quick and easy. Minimum price and quality are high. I recommend to all. View detail
Fits: HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50
It's a bargain
It is a simple Side stay.:Pair (for Left and Right) I think this price is a bargain at
There is no instruction manual, but anyone can install it with minimal tools. The quality of the product is in line with the price, but it does not bother me because of its simple shape. It has only been installed for a short period of time, so I am not sure about its durability, but I think it is solidly made without any rattling.
View detail
Rusted and replaced
I purchased the same product a long time ago, but it rusted due to neglect, so I purchased the same one from here this time. Rust in the tank is unavoidable, but the exterior is clean and the quality of the product is good enough. View detail
You will be able to try various CDIs.
By using this conversion coupler, you can use 5-pin CDI such as for CUB. You can also try CDIs made by Large Land, which are sold at low prices at certain auction sites, and you may be able to find an unexpected CDI that suits your engine. However, please use non-recommended CDI at your own risk. View detail
Perfect for loading up the Monkey
About quality and texture, I can confirm that the quality is good and that the material used is steel tubing and finished with a black painted coating with a design that suits the styling of the Monkey. About the feeling of use, This rear carrier has a large 5kg carrying capacity which makes it perfect for loading up the Monkey for a weekend away . Products to buy together, To get the most use out of the rear carrier if styling is not your solo purpose it would be ideal to add a small tail bag to your cart so the option to carry a small load is always available to you. Difficulty of installation, I can say the fitment of the rear carrier was very easy due to the simple nature of the install and relatively easy access to the four mounting points to secure the carrier with the included hardware and some original hardware. Cost performance and comparison with other products, The pricing of the product is great. You receive a rear carrier with a large carrying capacity for its size, the best for a rear carrier in this price range. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Spring Detachable
I purchased this product to use for removing and installing springs when removing and maintaining the Exhaust System.
The length is just right, no slippage or pain at the grips, and they are easy to use.
I don't use it that often, but it would be useful to have 1 pc.
View detail
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
PWK Type" For?
I was looking for replacement parts for a carburetor that was not leaking gasoline and I thought it might be overflow, and I found this one. I bought it because I thought it would probably be useful.
Float Gasket and other packings can be used.
Float also has a different shape, but I think it is Large sturdy.
The kit includes a Needle and Needle Holder, but the Needle Holder is different in size and cannot be installed. The difference in the diameter of the bleed holes can be seen when they are placed side by side. I can't install it, but even if I could, I am afraid to use it. I was swearing to myself that I should put this on even without ChalkBoots.
Buyers should check their own PWK's Size before making a purchase to avoid disappointment. Please be careful.
The Gasoline leak was not fixed, although it was attached where it could be attached. We are continuing with the repair work because we were able to eliminate one of the negatives for the time being.
View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA CHALY 70, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Product # 3181
I need to have the clutch serviced on my Monkey. Once the right side of the engine is opened, the gasket will need to be replaced. This is my first time purchasing this product, I hope everything goes well. First, I can note that I liked the workmanship and material, and also liked the packaging of this product. View detail
Fits: HONDA CROSS CUB, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB 50
Required for Flywheel removal
Required for Flywheel removal
Flywheel came off easily.
I don't use it except to remove the flywheel, so it seems expensive, but I can't work without it, so I don't have a choice.
View detail
Perfectly designed
[How is it used?
Purchased for MONKEYZ50J.
I wanted to install a MikuniVM22carburetor, but it interfered with the Tank, so I bought an Intac Manifold Variable Attachment. I thought it would be a good idea to buy a Minimoto product for the time being.
Was the one you received as per Image?
I thought it was as shown in the Image and well made, so I thought it was worth the price. One thing I did not expect was that the variable attachments were thicker than I expected.
Was the installation difficult?
Installation is simple:simply mount it with the depressed side toward the front of the vehicle and fasten it with the included dish Screw.
However, the included countersunk screw was too long and could not be tightened, perhaps because it was a 4LMONKEY, so I bought a shorter countersunk screw separately and installed it.
How was your experience with it?
It has been working fine with no leaks.
The carburetor in question, however, I managed to install it.
However, the thickness of the variable attachment is quite thick, so I tried various angles, but it was too high and interfered with the tank, so I could only use it in a certain direction.
Even in that direction, there is some interference with the tank when the chalk is raised, probably due to the structure of the carburetor. At any rate, I am glad I bought this Attachment because without it, I would not have been able to install the carburetor.
[Included Parts:were they on?
Attachment that matches the inside diameter of the Gasket and intake manifold?
[Was there anything that disappointed you?
The thickness is still Neck. It is well made, but it would have been 5 stars if it were thinner.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I'm glad I bought it, it's a RECOMMENDATION!
[How is it used?
Purchased for MONKEYZ50J.
I bought a high throttle kit because I couldn't pull the Axel with OEMThrottle when I used MikuniVM22 for Carburetor.
Was the one you received as per Image?
I bought it because the price was low, and I have the impression that it is better made than I expected. It has a simple structure, but I am satisfied with its solid construction. I think it is a product with perfect cost performance.
Was the installation difficult?
I was a bit confused at first because I did not have the Instruction Manual, but all I had to do was remove the screws from the cover of the Throttle and insert the wire into the handlebar.
You can find out more on YouTube and other sites.
Just a note, the handlebar needs to be replaced if you want to use it with 4LMONKEY's First Model Type. the brake lever is welded to the handlebar, so the high throttle kit will not fit properly.
How was your experience with it?
It worked perfectly. I like the way the Throttle pulls and returns. I think it's a good product at a reasonable price, so I think it's worth a try.
[Included Parts:were they on?
It comes with a Grip for LeftHandlebar.
[Was there anything that disappointed you?
Nothing in particular, but if I had to say, it would have been nice if the Instruction Manual had been included.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
High Quality Grommets
I got these to replace worn old rubber grommets from my original monkey fender. The Minimoto fender grommets are very quality and fit very well in the fender hole nice and firm. Great value for money and would buy again A+ View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA GORILLA
Kick Stand
The prefect way to add a kick stand to a honda monkey with rear sets, attaches to all 4 bolts under the engine and keeps it looking stock View detail
Swingarm Paint Protector
Cheap upgrade to not damage good paint on your swing arm with your restored 4mini bike. Protects the paint when you adjust the chain or change tyres. Also looks great and it's very well made with good detail and finish. A+ View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA Super Cub 50, HONDA SUPER CUB70, HONDA CHALY 50, HONDA DAX
Very best product at a very low price. ??
CUB was able to easily raise the Seat and open the fueling Cap. I like the design and size Polished. I am very happy with the design and size Polished. View detail
MINIMOTO fork emblem kit HONDA three-dimensional emblem highly recommended
When viewed from the back, there is a HONDA emblem on the seat, but when viewed from the front, there is no emblem, so I purchased this product as soon as I saw it.
To install this product, you will need to adjust the position of the Pure Soul.
The chrome Honda emblem seen from the front matches very well, almost like a genuine car.
It's rare as not many people have it yet. -------------------------------------------------- -------- From behind, there is a Honda emblem on the sheet, but I bought it immediately as soon as I saw this product because there was no emblem. To install this product, you need to adjust the location of genuine marriage. Chrome's Honda Emblem looks very good as a pure. There are still a lot of people installed, so there is scarcity. Powered by Google Translator
View detail