Reviews
It's hard to install
I bought it for my ZrX1200DAEG.
I wanted to raise the seat height a little, but
It doesn't fit in the seat base well and floats. 。
Consult the famous Seat reupholstery shop.
I did, but while I can replace the epidermis
The reply was that it could float away afterwards.
Does it vary from one individual to the next?
As a result, I don't use it.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S
I should have changed it earlier.
important item
[Was there anything that disappointed you?
There was nothing in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
I would appreciate it if it was a little cheaper.
[Do you have any products to compare it to?
None
Frequently Asked Items
What made you decide to buy?
I bought the old OEMSeat when I couldn't bear the wear and tear on my old OEMSeat and the pain in my butt.
How was your experience with it?
The firmness is just right and my butt is less sore after a long ride. I wish I had changed them sooner.
I thought
Was the installation difficult?
It is possible to install it if it proceeds according to the Instruction Manual. I did not use Dryer except for the first time, but it seems to be easy to work while warming the skin on a cold day.
【Please tell me the installation point and hang】
When you use the Dryer, I think you should be careful not to melt it too close to the surface skin. Also, if you put too much on the surface of the skin, the seat base will warp, so you need to adjust it.
Cheap Tuckers are fragile, so it's better to get a solid one, even if it's a little more expensive.
[Was the Instruction Manual easy to understand?
The Instruction Manual is easy to understand.
I was able to follow the Instruction Manual. I think it's kindly made.
[Others]
It's specific to the car model so it fits into the OEM Seat base. If you have a problem with your buttocks getting sore from a badly worn Seat, you had better change the Seat base as soon as possible. It's been over a year since I installed this product and I haven't had any problems with it. I highly recommend it.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S
Excellent!
I've had many Seat specialists do a lot of uncoating and reupholstering, but I've never been satisfied.
Since then, I've come to think of Seat's Custom as little more than a color change.
When I bought my ZrX1200 DAEG, the owner of the Motorcycle shop told me how good this product was, so I bought it, installed it, and it was so comfortable and shaped that it was ridiculous that I had spent tens of thousands of yen on Seat.
Cospa is also Large strange good.
It would be great if they would release other models as well.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S
My horns hurt
The COZY seat is a DAYTONA product, but the front corners of the COZY seat are gently sloping for better footing The RIPMOSEAT has a corner of Seat and the corner of Seat is in the way when stopping It's hard, and the wide seat surface makes my thighs ache when I'm stopped 。 The WaterproofSeat is on the Sponge, so it can't be beveled, or worse It is
The good news is that the Seat is now stiffer and less tired than before
View detail
There is no gap before the butt hurts too
EFFEX EFFEX : GEL-ZAB S
https : / / www. webike. net / sd / 1820188 /
I bought this inside and replaced it with epidermis.
Whether the shape is good or not, OEM gaps the body before
In this case, we will not Gap. ? ? ? This is the biggest thing
Also, since Seat high rose a little, I feel that the Control made it better
Is this a SeatSingle Body good or is it good to have charged Gel Zab
Synergistic effect, even if you ride for more than two hours your butt will not hurt.
I've gotten to buy it.
View detail
Seat repair in 23rd year
Although I was using an OEM for 23 years but I have covered with the youth and the guts while continuing to ride the same vehicle for 23 years with severe deterioration of fossil, considering the comfort of the remaining 10 years soon I thought about Repair. I searched Seat at this site, this Seat made by DAYTONA hit, so I thought. As a result, Manufacturer 's reliability and Urethane' s Modified version also comes with this price judging that there is no loss even if you try it once, you purchased it. As a result, Urethane is 5 inches thicker and has a waist than OEM. Besides, Cover is Grip in Emboss Good durability will be a future observation but it seems to be strong in the current sense. In addition, I attach attached Instruction Manual for installation exchange, and it is possible to exchange for person who usually do DIY by themselves without problem. If I can not strike all 100Shop using the Stapler for 100Shop, Water pump ply etc etc. I'm driving them in between. People with this experience can exchange without problems. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S
To Normal seat.
Originally Normal seat was unsatisfied with the lowness that it is so soft that it is not good for sitting comfort and sunken minutes.
RIPMOSEAT is provisionally attached to Normal base, but Sponge is stiff and comfortable to sit.
It's still a bit low, so if you bulk across a 10 mm Urethane between Base and Sponge it's the best height.
View detail
Refresh the Seat of CB 1000 SF!
Refreshed CB 1000 SFSeat of 20 years old. The epidermis has good texture, it is not a slippery condition like an OEM, but a nonslip process like Mesh has been done. There is reasonably hardness, GOOD. Buy Air Tucker and exchange with DIY. Work is completed in about half a day. However, even if I do it over and over again, although it has floated slightly, it is not of concern.
As this price, is not it the best Cost performance. it's recommended.
View detail
Since it was continuing riding for ten years or more, the Downs of the Seat urethane was felt and it became the Ripmoseat clearing work of purchase this time,From an old pure Urethane, the sheet front part rises by hard and it supports migration of the hi
Since it was continuing riding for ten years or more, the Downs of the Seat urethane was felt and it became the Ripmoseat clearing work of purchase this time,From an old pure Urethane, the sheet front part rises by hard and it supports migration of the hips at the time of a Breaking,A feeling of a Direct has the load to a sheet rather than a front by having become hard, and it became a satisfying result to have attached and felt the sheet
[ which the redo of the sheet outer skin was able to borrow the Hand Tucker (large fellow of a Stapler) of the acquaintance, and was able to drive in the needle somehow ] Done.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S
Although anything does not have a difficult thing as work to exchange, if an outer skin is stretched too much and it passes, the Base of a sheet will curve.The power degree in which a Base does not curve as does not have wrinkles was difficult.When it and
Although anything does not have a difficult thing as work to exchange, if an outer skin is stretched too much and it passes, the Base of a sheet will curve.The power degree in which a Base does not curve as does not have wrinkles was difficult.When it and an outer skin were fixed, unevenness of the Seat base was obstructive, and there is also a portion which cannot use a Gun Tucker and it suffered troubles.
The touch which sat down was harder than the NORMAL, and the sex with a guide peg got somewhat bad.
View detail