Reviews
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
Bore up essentials
I installed it at the same time when I replaced the only the cylinder in my APE 100Engine and light bored it up.
Most LightBore-Up Cylinder has an oil line that can be connected to the oil cooler. Regardless of whether the cooler is used or not, in order to increase the amount of oil supply to the upper waist, it is safer to replace the oil pump with one that has a larger discharge volume at the time of bore up, so I installed it.
Some people may find it a bit troublesome to work without removing the upper waist, because you have to be more careful not to get any chips, but I think the cooling effect will be worth the effort.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
better oil pump than stock
Install this oil pump upgrade and you will extend your motorcycle's engine life. It will save on wear and tear on the higher friction parts. Well worth the money. View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
more oil less troubles
Install the oil pump and you will ensure your engine will have a longer life. It keeps oil flowing to ALL critical areas of the engine. View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
It was as they say.
It was installed at the same time as Stroke up.
As the rumors say, I can't loosen the screw for the NORMALPump, so I used an electric drill to remove the screw head. It's a good thing that the kit came with the screw for the NORMALPump, but I'm not going to use it because I'm going to orifice it.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
It does not appear in numbers, but it is satisfying
Since we set XR 100 MOTARD to 115 cc, we chose DAYTONAMega oil pump to attach Oil cooler as heat countermeasure.
I do not know how much discharge volume it is because it is not compared with other companies but I do not have any problem with using Race for over 80 hours such as oill break or burning etc..
BALI is a bit of a product because it is caution, but rather than saying that Manufacturer is bad or putting out from a box or bag and assembling without inspecting itself is a mistake. Inexpensive parts have reasonable reasons. I think that it is also the responsibility of the using side.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
Is it DAYTONA from Takegawa?
I also have Takegawa's Oil Pump, but is it better that the reduction gear ratio does not change?
It is not a measure of actual Oil flow rate, but I think that it is surely effective!
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
To correspond to High Camshaft and Oil cooler
Normally it is unnecessary, but when you insert High Camshaft it improves filling efficiency and high revolution
Engine has become quite hot, and in the end it is imperative to introduce Oil cooler
So introduced.
Installation also moves smoothly to Smooth.
After installing Oil cooler with NORMALPump -2. About 5 ° C.
With this Oil pump, it has become possible to secure about -5 ℃, so the corresponding effect has come out.
(Temperature change with Oil cooler combined. With Oil pump's Large Capacity alone cooling is
I can not expect it. Just in case)
Would it be somewhat expensive to say difficulties and fuel economy will drop slightly.
Small Engine, so the Oil pump's loss seems to resonate.
Starting from CB 50 in the first place super high engine. It has sufficient cooling performance up to XR
As it is a secured Engine, even if you introduce about 115 cc + STREETCam
It may not make much sense.
It is suitable for people who use high rotation while introducing extreme Cam and introducing Oil cooler.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
At the same time as Bore up
It was installed for cooling when Bore up was done.
The reason for choosing is that Cost performance is good and Oil spout amount is large.
I tried to make it Mr. Mukawa, but I made it from DAYTONA because the amount of squirting is small compared to the price.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
It purchases in order to carry out the Bore up of the APE. Since the amount of discharge of this product of an Oil increases considerably, it is recommended. Although I think that the thing of Mukawa is not bad well, either, this pro
It purchases in order to carry out the Bore up of the APE.
Since the amount of discharge of this product of an Oil increases considerably, it is recommended.
Although I think that the thing of Mukawa is not bad well, either, this product of a DAYTONA is excellent in a Cost performance.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
Since the Engine which was carrying out the Bore up from new car purchase blew at last, in connection with the Engine assembly, it purchased newly. Since it was the cheapest and there were also many amounts of discharge, it chose, but the Clearance
Since the Engine which was carrying out the Bore up from new car purchase blew at last, in connection with the Engine assembly, it purchased newly.
Since it was the cheapest and there were also many amounts of discharge, it chose, but the Clearance of a thing with much BALI and the nail portion of the Spring of a Shift arm seems to have interfered with the naked eye at about 0.03 mm.
I think that what is necessary is to delete aslant for pure business and just to make escape for it.
Separately required again, since the Drill for Orifice expansion is not attached.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
Since he wanted to also introduce a Shower head with having carried out the Bore up in the future, it exchanged. The size is only a Case of a Digital camera. The pure Oil pump was able to be ordinarily removed by the Impact Driver.
Since he wanted to also introduce a Shower head with having carried out the Bore up in the future, it exchanged.
The
size is only a Case of a Digital camera.
The pure Oil pump was able to be ordinarily removed by the Impact Driver.
Although it is the parts which are not visible, it is the Massey kana grade rather than breaking well (smile).
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
The Oil pump was also exchanged for what has large capacity in connection with the Bore up of a MONKEY. Probably, aside from the thing besides , only the Oil pump should be absolutely exchanged for what has large Pump capacity. Since a 2-mm Dri
The Oil pump was also exchanged for what has large capacity in connection with the Bore up of a MONKEY.
Probably, aside from the thing besides
, only the Oil pump should be absolutely exchanged for what has large Pump capacity.
Since a 2-mm Drill is needed separately although the Orifice of the
Crankcase is expanded, it is an advance-preparations important point.
I consider that it is better for an Impact Driver to be also to, remove the hard plate Screw of a NORMAL in addition to this.
A fixing screw is not a Plus and this product is good to have a hexagon head.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
It seems that it is as it is called a Mega, and expansion of the hole of an Orifice is larger than each company 出ている Pump. I would like to think that the quantity injected so much increased -- if two plate Screws can remove attachment since it
It seems that it is as it is called a Mega, and expansion of the hole of an Orifice is larger than each company 出ている Pump.
I would like to think that the quantity injected so much increased -- if two plate Screws can remove
attachment since it
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
[Webike Monitor] The Bore up was carried out from APE50cc to 124 cc, and since the Oil cooler was also a simultaneous wearing schedule, this largest product of the oil flow rate was chosen. even if the comment of which use was done a
[Webike Monitor] The Bore up was carried out from
APE50cc to 124 cc, and since the
Oil cooler was also a simultaneous wearing schedule, this largest product of the
oil flow rate was chosen.
even if the comment of which
use was done attach an Oil cooler --
-- the Oil circulates firmly.
although attachment to
50cc requires the plate Screw of M6 --
-- it is attached to this product from origin.
although it was good in addition when the
25mm Drill was also attached --
-- is it extravagant at this price?
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
Since the flow rate was the largest in the Oil pump for an APE and the price was moreover cheap as far as I get to know, it purchased. Although I also regard the part resistance with the strong flow rate as large, since it has not compared with other
Since the flow rate was the largest in the Oil pump for an APE and the price was moreover cheap as far as I get to know, it purchased.
Although I also regard the part resistance with the strong
flow rate as large, since it has not compared with other things, it cannot feel.
Although various ways of running were adopted, for the moment, an Oil-related Trouble is not in an Engine.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
It incorporates at the time of an engine Bore up. Although the effect is not necessarily a foregone conclusion, the amount of discharge of the Oil should be going up it. With no place fault of now.
It incorporates at the time of an engine Bore up.
Although the
effect is not necessarily a foregone conclusion, the amount of discharge of the Oil should be going up it.
With no place fault of
now.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
Before, the thing of the takegawa was used. It was hung by a change of air and the language of the mega, and this oil pump was decided on. Degree of effect .... It does not understand. As look before you leap ....
Before, the thing of the takegawa was used.
It was hung by a change of air and the language of the mega, and this oil pump was decided on.
Degree of effect .... It does not understand.
As look before you leap ....
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
It had written kindly besides how take and an opinion attaches an oil pump. The bolt required for attachment is also contained and it is wonderful. Since it is the engine which carried out bore up although it attaches and an effect cannot be felt,
It had written kindly besides how take and an opinion attaches an oil pump.
The bolt required for attachment is also contained and it is wonderful.
Since it is the engine which carried out bore up although it attaches and an effect cannot be felt, it is insurance once.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
It attached to the ape 100. It exchanged with the bore up kit of the Mukawa S stage squat 125. Since printing [ a squat ] of 125 was seen at other sites, it is attachment for care. About attachment, shock drivers are necessaries. It is poi
It attached to the ape 100.
It exchanged with the bore up kit of the Mukawa S stage squat 125.
Since printing [ a squat ] of 125 was seen at other sites, it is attachment for care.
About attachment, shock drivers are necessaries.
It is point up that attach since it will not leak if a shock driver is used, and a screw thread is cracked, and the hexagon-head screw in the case is attached.
Although it is not goods which can realize an effect, printing of a piston is not seen to the run which is about 1000 km now for Kon.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD
Since engine boa AFFU was performed, it purchased. An impact driver is needed when removing pure Penghu. Although processing is required of a drill in the case of attachment, since you can do processing simply, please challenge even in the more ne
Since engine boa AFFU was performed, it purchased.
An impact driver is needed when removing pure Penghu.
Although processing is required of a drill in the case of attachment, since you can do processing simply, please challenge even in the more nearly first one.
Since it is not goods which can be felt although it is after use, it cannot comment, but I think that it can feel then since an oil cooler is due to be attached.
View detail