Reviews
Wow that's cool
It was bigger than I expected.
It's best not to fall over, but, well, Large seems sturdy.
To install, simply insert it into the hole and tighten with an 8mm Hexagonal Wrench.
It said to tighten at 40N, but there was only Torque wrench up to 25N, so I may have to check for looseness or something every now and then.
View detail
Spartan increase/increase!
[How is it used?
Appearance change and Damage reduction.
Was the one you received as per Image?
more than expected
Was the installation difficult?
It is easy if you have the right tools in place to do the work.
How was your experience with it?
Satisfactory and good
[Included Parts:were they on?
no problem
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Great
I am glad I put it on! I feel safe. View detail
Can be installed on MT-10 2022MODEL
It is not in the fit, but I bought it because the Frame, etc. should be the same.
Left SideBolt in NORMAL ： M12x40 P1.25 Flange cap bolt, installed without collar.
NORMAL Right SideBolt ： M12x42 P1.25 Put three color points on it and get it out. 15.
Balter's attached Left SideBolt ： M12x100 Protector, collar on and out. 40
Balter's attached Right SideBolt:M12x80 as well. 20
Therefore, the effective length of Bolt is 5mm longer than Baltar's, and since it does not butt up against it, there is no problem, so we installed it.
Installation is by tightening Torque 70 Nm. It is recommended to use a torque wrench since it is an important part.
Also, the NORMAL bolt is quite hard to remove, so it is better to prepare a long Spinner Handlebar or the like.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
Overlaying sliders are the best
I bought it at a good price during the overlaying sale period.
Since the subframe was installed first, there is no major problem with installation.
Remove the existing spacer and install the slider and enclosed spacer in its place. Since the frame and sliders vary depending on the model year, check the model year before purchasing.
The beautiful color of silver and the sturdy structure and details are also overlaying. -------------------------------------------------- -------- I bought it at a good price for the overlacing sale period. Since the subframe was installed first, there is no problem with the installation. You can remove the spacer and install the spacer with a slider on the spot. The frame and slider vary depending on the year, so check the year when you buy and buy. The beautiful color of silver and the strong structure and details are also over-racing. Powered by Google Translator
View detail
a cane before a fall.
Slider as a fall prevention measure.
Since the installation uses Engine Mounting Bolt, it is easier to work if the Engine is supported by the car's Jacketc. in advance. Basically, it was a simple installation.
I lost Front in Mini circuit and SlipDown, but Slider worked well. it seems to have done a good job with only Cowl scratches and band shaving of YOSHIMURAExhaust System.
View detail
be well-matched
I purchased this product when I took delivery of my gsx-s1000gt. The installation was done by the dealer, so I don't know how difficult it was, but I felt that I could probably do it by myself without any difficulty. However, the manager of the store said that there are many people who make mistakes in screw tightening, so please leave it to us.
The installation of this product is, in a word, a good fit for this motorcycle. It seems to protect the cowling from standing chipping. However, I would like to ride it carefully so as not to drown standing up.
The angle may be a little bad, but here is a photo of the installed condition.
View detail
If the price is low enough
It looks really cool. I hope more Reasonable products from other brands will be released in the future, like the Type 2 GSX1300R HAYABUSA. View detail
easy
I have yet to beat it, so the effect is unknown, so I am using Center for the effect item.
Installation is Quantity:Pair (for Left and Right) We had no problem if we worked on the remaining side after either one was completed.
I would like to use it as little as possible, but I think it is cheap if you consider it as a peace of mind fee.
View detail
Babyface Frame Slider
The standard Frame Slider is installed.
It is not as uncomfortable as I expected.
BMW is ridiculously overpriced for Cowl, so it's safer to put it on.
View detail
Fits: YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15, YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15
No instruction manual?
There is no instruction manual.
I am not sure about the installation unless it is at least illustrated for local use.
Can you do something about it?
I can't even comment.
View detail
Speedra Frame Slider
It is easy to install., I think it will be useful not only in Circuit but in all situations as an insurance policy in case of a fall. View detail
Babyface Engine slider
I bought the BodyStyle Under Cowl because the KawasakiOEMSlider that I had been wearing for some time would not stick to it after I installed it.
I had installed the same manufacturer's Slider on my previous S1000RR. Fortunately, I have not had to use the Slider yet, but I think the shape is good and not too assertive.
View detail
Highly rigid
The mount is solid and the slider is big enough to prevent tipping over. View detail
insurance against fire from standing fire
Bracket is Material:It is made of aluminum and is lightweight. The bolt on the engine hanger is difficult to remove, but once removed, it is easy. 22mm Spanner and a MONKEY Wrench are required. View detail
Slider
The Engine could be installed as is without lowering.
Torque management is a safe bet.
Slider. slipped and missed Damage….
I hope it will not be useful!
View detail
Even an amateur could install it easily.
[How is it used?
To prevent damage to Cowl in the event of a fall?
Was the one you received as per Image?
Mount section was solid.
Was the installation difficult?
The product installation itself is easy, with the only difficulty being the removal and installation of the Cowl.
How was your experience with it?
It's for just in case, so it's not active yet.
[Included Parts:were they on?
It was all there, and Sticker was included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
It was a Large-size tool that Hexagon did not have in its arsenal.
The Instruction Manual only showed pictures of the assembly of the Parts, so I referred to the installation position by looking at the pictures of the installation examples on the Home page.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
a very good-looking item
First of all, it's a very good product. It's lighter and stronger than I thought. If the bike falls, I think I can protect it well. It makes the bike look even better on the outside. I highly recommend it. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS
Installed on Z900RS
I bought it because it looked cool as a Slider. I am satisfied with it, especially the volume on the Left Side of the Engine, which improves the Parenthesis.
Plate was painted Gold from Red.
View detail
Fits: KAWASAKI Ninja H2 SX SE +, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX
I hope I never have to use it.
It was installed to reduce damage in the event of a fall.
I chose typeE because I preferred this shape.
View detail