Reviews
It can be used as an accompaniment to individuality and Coordinates!
[How is it used?
Installed on the rear side cowl for dress-up.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is easy, since all you have to do is to put the Sticker on the wall.
How was your experience with it?
The color and texture are good.
[Included Parts:were they on?
Originally there is no Included Parts:.
[Was there anything that disappointed you?
None
It is a Sticker with an unfamiliar name and unusual color, so it is good to use it for coordinates according to your dress-up preferences.
View detail
Caution before applying!
I purchased the largest size Ninja letters to put on my helmet.
I was able to apply it without any problems, but there was a little air in it because it was applied to a curved surface (sweat), but that is acceptable.
Also, note that the cut lettering is a sticker that is connected to all other sizes, so it is necessary to cut, peel, and paste only the necessary lettering.
View detail
I would also like to have a Sticker for regular Material.
I bought it to put on Goods that have nothing to do with Motorcycle at all.
The material is aluminum for Silencer, but I was wondering if there was a Sticker for other common materials such as vinyl chloride.
View detail
One point
The design is neither good nor bad.
I think it is a good design for One Point because it is quite bright Red.
NameValue is also a sufficient Brand, so I don't think there is anything embarrassing about wearing it separately.
View detail
Decal Paste
The spacing was slightly out of alignment with the Decal on the CBR400R22 Tank. View detail
What's with the murkiness?
Obviously different from the product photo!
Gap in shape and size is fine.
Colors lol.
I thought they put a protective film over the top.
I peeled it off and it died lol.
Of course I peeled it all off and threw it away!
View detail
I knew it was too big.
I bought Red&Black to match my Gayety Red.
It matches well with the color of the car body, but it is too big and I was worried about where to put it.
Although I was aware of the size before I purchased the product, I regret that it was still too big.
View detail
For a casual Appeal.
If you use YOSHIMURA products, you want to put up one Sticker.
The four letters of YOSHIMURA are forever unchanged.
View detail
Swing Arm Decal
Used on MD47RLY50. Easy to apply.
It is thick and seems to offer good protection.
OEMDecal's Tricolor color and
I think it is good to match and have a sense of unity.
Front fork is also available in the same design.
Will HONDALogo feel like a traffic jam?
View detail
It's just like that.
[How is it used?
To prevent paint from peeling and rust on my KLX125 that I bought with the intention of using it for mud play etc. Let's put a Film on the Frame." I decided to try something other than a transparent protective film, and after examining various options, I arrived at this product.
How was your experience with it?
As of 2024, similar products are available from various manufacturers at reasonable prices, but at the time of purchase (about 10 years ago), there were few of this type of product and it involved a fair amount of expense.
However, the adhesive strength of the film is high due to the fact that it is Seat made by 3M, and it is a very good product because it can be firmly attached to round pipe-shaped areas and some unevenness with heat from Dryeretc.
the last "Carbon Style" So, if you look at it up close, you can easily identify it as a fake product, but if you look at it from a distance... it is not so bad.
How did it compare to other products?
At that time, there were still few products of this kind, and there were no comparable products at the time of purchase, but compared to similar products in recent years, the adhesive strength is not inferior, and it is hard to peel off at the place where the adhesive is firmly attached by following the procedure. The adhesive is so secure that it is durable as long as you do not intentionally peel it off even when washing your car using a high-pressure washer.
[Points to note]
Free to Cut Seal." So, make sure to carry out the process before applying (Rust, dust and oil removal, etc.).
Other items that would be helpful
The deciding factor in the purchase
Strong adhesive strength to fix even OEMAeropartsetc. of a car with Double-sided Tape. Made by 3M. I think this was the most important factor in selecting this product.
[How is it used?
As mentioned above, it is used to prevent Wound on Frames and other steel product parts that would look bad due to Rust or scratches if left in place.
【Included Parts:presence or absence】.
One 300×400mm Seat and one sheet of paper with product description & how to paste Guide.
[ITEMS TO BUY TOGETHER
If you want to use it on a complicated shape or over a large area, use a degreaser (parts cleaner, Enamel thinners, etc.), and if you want to use it on a place where you can see if it is rusted, use a rust remover (wire brush, sandpaper, chemical products, etc.) and a rust remover afterwards. and a rust remover afterwards.
If you have a pen-shaped art knife (Scissors or Cutter) for shaping, it will be even easier to cut the excess portions.
Opinions and requests to Manufacturer.
It would be useful to have a larger (500×1000mm or so) film for wide-area use.
View detail
OEMSticker
It is a YAMAHALogo sticker.
However, the image is pure White, but it looked slightly Cream-colored.
View detail
OHLINS！！
[How is it used?
I installed OHLINS on my Z900RS, but when I installed the SEOEM Dust cover, the Preload Adjuster was facing the opposite direction and the StickerLogo was hidden. So I bought this StickerLogo.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Degrease with Silicon-off before installation.
How was your experience with it?
No problem at all, but it would have been better if the same size was available in Black!
View detail
Smaller size is easier to handle.
I have purchased this Sticker many times from webike, but I think the Smaller Size is better because there are more options of where to put it.
It's a shame that most of the colors and sizes are discontinued these days!
View detail
Heat-resistant Sticker
When I purchased a certain Exhaust System, there was nothing in the Silencer section, so I put it on.
I know it is heat resistant, but is it really heat resistant? I think it's really heat resistant.
But when I looked at it after running, there was no problem at all. As expected of Mr. MORIWAKI.
The durability of the product is unknown as it has just been applied.
View detail
No obligation.
Since the seal is voluntarily attached by Manufacturer to moped models, there is no problem even if it is not attached.
However, I have encountered a few times where the driver has mistakenly parked the car in front of me and thought it was one of a kind, only to see the License Plate and realize that it was a misunderstanding.
This is especially true for CUBs, which all look the same at a glance.
The Rear is not a problem because the color of the License Plate is self-explanatory, so we only used for Front Fender.
To be honest, I am not sure how effective it would be on a white Fender, but it is a good luck charm just in case.
Furthermore, it is a Seal, so durability is not an issue.
It is not at all necessary for some types of cars.
View detail
I like White with a subtle Pearl.
I don't have any special impression on the sticker (laugh), but I bought it with my extra points simply because I am an AELLA fan and it is useless for non-AELLA fans (laugh). I don't like to put Stickers on my products too much, but I think Transfer Stickers with simple and small letters only are acceptable for me personally.
I had no expectations because it was just a Sticker, but when I saw the actual product. Nice job, AELLA! I'm going to put it casually in an inconspicuous place on my second son's 959 Panigale, which is full of AELLAParts.
View detail
Fits: SUZUKI GSX-R125, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN200, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Fashion starts at your feet
Rim sticker will be attached!
This is not practicality, but a complete dress-up (laugh).
[Before pasting to …
Select the color of the MotorcycleRim sticker.
When I thought about what color Rim sticker to use, here is what I came up with 。
。 If the color next to the Motorcycle color is the Rim Sticker color, it will give a coherent and soft impression.
*Similar colors are the use of two/three adjacent colors in a hue ring.
●●* Use complementary color schemes to create Impact.
If you use a color that is opposite to the Motorcycle color, Contrast will be stronger and the impression will be more Impactful.
*Complementary colors are the opposite colors of the hue ring.
●*Using a three-color scheme, the product is both colorful and impactful. 。 If you use Motorcycle's colors and two colors that form equilateral triangles, you can create an Impact combination with three colors.
* A three-color scheme is a three-color version of a captive color scheme.
White and black go with everything.
All colors are white when lightness is increased and black when lightness is decreased. 。 In other words, unsaturated White and Black go with any color.
Same color as the player you admire 。 My lucky color etc.
→As for the color, since the Wheel is Black, I chose Red based on the principle of a three-color scheme.
(2) Check the Rim width.
Measure the width of your Motorcycle Rim and choose the largest size that can be stretched to that width. If the width is thicker, the impression of the area is stronger, so it does not bother you. Is distortion bothering you only at first? It depends on your personality, but the distortion of Rim sticker will bother you only for a while after you put it on. 。 It will not be a concern soon.
When a narrow rim sticker is used, it becomes a double circle with the Wheel outline. 。 This causes noticeable distortion of Sticker.
MotorcycleRim sticker tensioning instructions
[WATERING] The way is Commendation,
● Separate 1 pc at a time. The goods are thus Quantity:Several pieces on a 1 pc. mount. 。 This is then separated by 1 pc so that Sticker is unaware of it. 。 This way, 1 pc is easy to handle and easy to put up. 。 No damage to other Stickers during application 。 It is tedious, but there is no way to put them up neatly without putting them up one at a time.
↓
●Wash the Wheel to beautify. Wash and degrease the wheel, as residual oil will make it easier to peel off.
↓
● Dilute kitchen detergent and place in 100 Spray.
↓
The water is applied to the rim. After spraying soapy water, place the Sticker on the Rim 。 While wet with soapy water, fine adjustment is possible, so position it and once it is fixed, wipe the top with Towel or similar to remove water and fix it in place. 。
[Hang of the tensioning method].
Float the front and rear wheels…If you don't float the Wheel and put it up, it will be troublesome! It is easy to put up the wheel by floating the wheel with Center Stand or Motorcycle Stand. 。 If the rear wheel cannot be lifted, move the Motorcycle a little at a time, or turn the Wheel by tilting it toward the Side Stand. 。 Even a simple STAND is useful enough for ChainMaintenance, etc. 。 It is convenient to have one.
good point
● It will look really cool!
The durability of the parts can be expected since they are SEA BASSOEMOption Parts.
Easy to apply as it comes with a backing paper.
important point
Water tension is less likely to fail.
Degreasing is a must.
Do not do it all at once, but check the position of the seal and slowly remove air bubbles between the seal and the car body.
Of course, the Shop will do it for you, and there may be fewer failures (some Shops are not good at this). (Some shops seem to be bad at it.) However, it is possible.
You can think of your own color and put it on by yourself… It will also increase your love for your car.
View detail
Good quality
I bought it because I had accumulated a lot of Points. I did the groundwork and attached it to the Rear box. The size is just right. I don't know how durable it is yet. View detail
Amazing
Another great product! Extremly happy with the 1100four badges and quick international freight, I'll be buying a few more great parts in the near future, Thank you kindly :) View detail
Motorcycle, of course, was used to Remake an old NotebookPC!
Material on the Tank of my beloved Ninja 250SL:I wanted to put a Carbon Style Line sticker on it, and also used it to remake my NotebookPC, which had become shabby after a lot of use. The result is very cool! Of course, you have to degrease it properly! No problems with wetting it or touching it and it doesn't peel off! View detail