Reviews
It's so bright!
The OEM headlamp was too dark and I was not satisfied with it, so I installed it. As a result, I am satisfied with Large! The brightness is up by 50%. I am very happy to be able to drive quite safely at night on my commute to work and on mountain passes, etc.! However, the durability is a little low, and the low beam went out after about 3 years. But it's tolerable because it's quite bright! Recommendation! View detail
500Hz MHO-2
Quality and texture information is heard better than the product a heavy note that is easy to use Cool design information Size Chart Information std Double Product Cost performance and comparison with other products sound busier than std horn WeBike packaging is always great. Arrives in a week for delivery and packaging Purchasing concerns, precautions, or advice I don't recommend it to people who just want to show the degree of caution, but I really recommend it to people who want to have a big horn View detail
It is a rather Large sound.
The standard phone has a small sound, and I often play it before changing lanes with a car that jumps out or without a blinker, but the sound is so small that I don't even notice it, and I try blasting an external exhaust system, but it's like a family, so I only put one that I had on my old car.
The sound was reasonably LargeKiku, but I happened to see a Review on this product and it was rather good and the price seemed reasonable, so I bought it.
Waterproof and dustproof? It is also waterproof and dustproof, so it is good for Motorcycle.
The sound is better than the for-vehicle with a large size, but I still don't like the single phone. However, it is not a good idea to use a double-phone for Motorcycle.
The sound is quite large, so the tone is a bit like Single, but I think it's a level that I can tolerate. I may buy another frequency in the near future.
View detail
Stable Halogen bulb
Low beam was cut off and replaced.
I thought it was a trendy LED, but there were some concerns, so I replaced it with a Halogen bulb. The brightness is normal.
View detail
Compact to improve volume and sound quality
I was thinking of replacing the OEMHorn as it sounds poor.
I wasn't sure if I should go with DoubleHorn.
The lack of room for mounting space and
It was a bit pricey from the posts of those who purchased it.
As a Manufacturer, we have confidence in our products, and the sound quality is excellent at 400Hz, 500Hz, and
Three types of 600Hz can be selected, and Cover is included for
I chose the Single Body by piaaSports Horn.
To install the Body, remove the OEMHorn and
I just had to replace it.
Wiring is a special type of OEMHorn Plug.
I bought a Denali Electronics Connection Plug.
It was easy to connect.
I haven't compared them, but my feeling is that
I think it is right to install 500Hz.
View detail
OEMQuality
I bought this Harness to install the KITACO Shuttle beam on my SEROW250 and because this Harness is also used for the OEM Option.
It's been 1 year and 9 months since I installed it and I've driven about 25,000km without any problems.
The kit for SEROW250 released from Y's Gear is closer to the battery in order to interrupt the coupler of Blinker relay for the ACC power supply.
In contrast, because this is coming out from the Switch side which will become Handlebar for Universal, I made it branch from Horn and took out ACC power.
The person who is familiar with the electric relation may be able to suppress the cost by arranging Switchetc. by oneself, but I, the person who is not familiar with it, may be able to use the quantity of Universal that may be reliable.:Set was grateful for the presence.
View detail
Designed for Motorcycle
What made you decide to buy?
(I didn't buy the product (it was included in the Fog Lamp Kit mentioned below), so I omitted it
How was your experience with it?
The object of the in-play is the actual Fog Lamp Kit (part number:0SK-ZX-MGZ) that I purchased 02) will be the power connection Harness included in the (02) (see the second post photo. 400X There are some parts that have been slightly arranged for this product, but as far as I can see from the product photos, it is basically (Same as the original)
The Switch is Waterproof Specification and every time you press the Switch It is designed to switch between ON (lit up in red) and OFF (lit up in green), so that you can see the current status is easy to understand (Quantity:(See the photo posted in 1pc. eyes)
Looking at the other imprints/reviews "The Switch is hard to push But I didn't mind it because it's not an operation I do frequently
Was the installation difficult?
For power, you can find the HONDAOEMOption in the RightFront cowl Coupler for Option to be used with Fog Lamp etc. (It is in the 3rd picture of the post) Covered in translucent HarnessBoots (it's hard to tell), the Black (Coupler)
Connecting to the Coupler for Options is not difficult, but in the case of the 400X Until the coupler can be accessed where it is, the middle cowl and You need to remove the MeterPaneletc (See the third photo in the post)
【Please tell me the installation point and hang】
As for the power supply, you can stop the standard Battery installation method and use the Option It is connected to the Coupler (ACC power supply) for
Therefore, the Round Type Terminal that was assembled on Harness was detached and By reusing the DummyCoupler installed on the Coupler to which you are connected Assembled on Harness (https://imp.webike.net/) article/0432356/(See the
In order to perform the following wiring, Harness was reconfigured and assembled after disassembly It is
Harness for LeftLamp is aligned with Rightfor BlinkerHarness Inside the LeftMiddle cowl for RightLamp and Switch Harness is wiring to the inside of the RightMiddle cowl
Harness for switch folds forward for RightHandlebar switch Wiring along the Harness and connecting to the Switch and Coupler
In addition, so that it is easy to remove the Coupler of LampBody, Harness for Lamp can be used for the same purpose It can be pulled out at the bottom of the front cowl (Quantity:1 Set of 4pcs. (See the photo posted in the eye)
Also, to prevent the Harness for Lamp from touching the Front forketc Band is used to secure it to the Front cowl stay (see the fifth photo in the post)
I tried to mount the Switch on the Right Side Handlebar, but the included Master when using the Switch bracket for Handlebar mounting It is attached to the master cylinder holder to interfere with the cylinder
By the way, the NORMAL master clankholder is not available when the front side is flat There is no, so the ENDURANCE "Master Cylinder Holder B (https://imp.webike.net/commu/article/) 0295843/) in exchange for (Quantity:(See the photo posted in 1pc. eyes)
[Was there anything that disappointed you?
I've been using it for over 4 years and so far, nothing special
[Was the Instruction Manual easy to understand?
(Omitted since I didn't buy the product.)
[Included Parts:were they on?
(Omitted since I didn't buy the product.)
Do you have any wishes or improvements you would like to make for the Manufacturer?
I've been using it for over 4 years and so far, nothing special
[Do you have any products to compare it to?
Not particularly
Harness power connection included in the Fog Lamp Kit I purchased (subject to in-play) ), I thought I could just use the
[Others]
I had never seen Fog Lamp Kit that I purchased this time in Net Shopping being sold I happened to see it (even though I saw it, it was labeled as discontinued (T_T)), but it just happened to be "400X Fog Lamp When I was searching for the image with the key word "#", I happened to find it on the Yahoo! When I was searching for the image with the key word, I found by chance that it was listed on Yahoo!
* The 19th Impression Con test (https://www.webike.net/campaign/20191001_) (impression_contest/), and use the template for this item as a reference I'm writing an impresario by
View detail
Great tone
I installed it on my SR400, removed the OEMHorn and tried to install it in its place! But the plastic cover got in the way and I had to remove it and cut the bracket I was able to install it without any interference 。 As for the tone, I'm satisfied with the sound, which is much larger than I imagined View detail
It is a good sound that you can firmly Appeal
Because OEM's Horn is Single, it is necessary to have a sound that sounds good with a good tone in Single
As a result of examining various Net, this Horn is the best
400 - 500 - There were three kinds of 600 Hz, but if it is Single, 500 Hz
It was a correct answer..
Installation required Bracket and Wiring extension, but it is easy.
View detail
115 dB Large volume
M6 Bolt in the same position as OEMHorn / I installed it with Nut.
Those who use the Fork Stabilizer are attentive to interference at the time of Full Bottom.
In my case I could secure a stroke amount of around 80 mm.
A bracket with high strength is built in, but it is indicated that there is a possibility of breakage when attaching Screw is removed.
Anyone who wants to remove Bracket and install it is wary of caution.
In the Horn opening, water - There is a shielding board called Sand Guard, so it seems that the failure seems to be strong even if it is mounted toward the front.
Sound pressure is 115 dB. Although it sees well the goods of about 100 to 110 dB, since it is 2 doubled at 6 dBUp, even Single has sufficient power.
The difficulty is Large (Thickness) Is not it?. There is 70 mm at the thickest part.
I think that it will become the best product if thinning and the degree of freedom of Bracket are improved.
View detail
Installation is devised, the sound is Spartan
The aged deterioration and poor sound of OEMHorn are motives of exchange.
I was prepared for inevitable innovation from the shape and large size. Parts arrived and we planned to devise an installation at the same place as OEMHorn. OEMHorn's Harness is as it is as a prerequisite. For the time being, we temporarily installed Bracket, Cowl and Meter Bracketetc. , Handlebar as Quantity : Pair (for Left and Right) Bracket was processed and book grouped at a position not interfering even if it cuts all the way. I can see a bit from Upper Cowl, I am the best position on my own.
I do not say the best tone.
View detail
Feel free separate switch
Headlight is dark and dark
I thought from the beginning I bought it
Because the number of cases where the car jumped out in the evening could not be counted so far
In order to improve visibility, I decided to attach Day Time LED Lamp.
At that time
- I do not want to link with Headlight.
- Easy to move from Day TimeLED Lamp to Sub lamp of H3 Bulb
We have decided the condition that,
Kit that easily clears it is a console product.
By incorporating this product and connecting various Lamps of PIAA
Lo only, Hi only, Lo + sub, Hi + sub etc etc. You will be able to use according to the situation.
Both Deno and MLSeries have common connection terminals with Harness (It seems) Because
When we feel insufficient light intensity or when there is a change in usage
It seems that it is possible to easily transfer to Deno → ML.
Switch is also included
On On, Red, Off on Green Lights in Design
Bracket which can also be attached to the rising part of ZETA's SX 3 comes with it.
Just saying that we are using the Waterproof terminal
What do you think is the exposure of the terminal covered with Vinyl?.
(Personally renovated
View detail
Self-assertion is amazing! (Lol)
Walking with a smash hoarding Shit cricket purchased for repelling
"Pea" It sounds like a sound is not it (Lol)
Also, the traffic situation of Nagoya where I live is not good - - - (~_~;)
I think that the installation position is different depending on the model,
Installation of the Z750R in the NORMAL position is unexpected, difficult (Lol)
It may not be helpful because there are few people riding such a rare Motorcycle
Assertiveness is intense when it is NORMAL position.
I dared to put that position - - -
In the case of Full Lock & Full Bottom, it seems to interfere with the front wheels
There will not be such a situation first (LOL)
I feel that Bracket's Plate is somewhat thin
It seems better to check Check Mame.
Oh, I forgot (~_~;)
There is no problem for the sound of the sound.
It is a substitute that can be used about 10 times NORMAL (^_-) - ☆
View detail
CB600F HORNET 07 PC41
I installed it in CB 600 F HORNET PC 41.
If it is a mounting position of NORMAL, it will protrude
It is a place to worry, I'm waiting for the time being.
The sound is good!
View detail
The goods here were attached and carried out. Although it is not so white as it says that it is snow-white, I feel that it became broadly to be sure and bright.Probably it is 4700k and is such a thing.Since it used for commuting, he
The goods here were attached and carried out.
Although it is not so white as it says that it is snow-white, I feel that it became broadly to be sure and bright.Probably it is
4700k and is such a thing.Since it used for
commuting, he feels easy from forward and could operate night also.
The thing which only PIAA merely has and whose price is higher than the other company is a fly in the ointment.
View detail
[Webike Monitor] Since the ball piece had been carried out only after this Valve was contained when he bought this Motorcycle with the medieval times, he rebought the same thing. While there were cheap goods in etc., the brightness of the l
[Webike Monitor] Since the ball piece had been carried out only after this Valve was contained when he bought this Motorcycle with the
medieval times, he rebought the same thing.
While there were cheap goods in
etc., the brightness of the light chose this product too specially,
Cut guidance and it runs the night journey that a streetlight does not have me, either, so that you may certainly say, as long as it goes for the Touring which other Motorcycle friends say that the light of my Motorcycle is bright,
if a High beam is still used, it will be the brightness which can run in comfort -- it is not just HID-needed, and peevish [ come out and ] -- ! --
-- he will buy the goods same surely again, supposing there are the next and an opportunity to buy.
View detail
pure -- since 25W went out, only one eye is a trial. Although it was bright to be sure, it was called what or an one-point concentration ? spread was lost. The rain of the color of this grade is also legible. If durable now, I will think that he has no co
pure -- since 25W went out, only one eye is a trial. Although it was bright to be sure, it was called what or an one-point concentration ? spread was lost. The rain of the color of this grade is also legible. If durable now, I will think that he has no complaint. View detail
Since it was uneasy that the light of a pure bulb runs the place which does not have an outdoor light in orange, this product made custom simply and conveniently was purchased. Since the direction of others has contributed, light carries a package and
Since it was uneasy that the light of a pure bulb runs the place which does not have an outdoor light in orange, this product made custom simply and conveniently was purchased.
Since the direction of others has contributed, light carries a package and the photograph of the headlight after attachment.
Although it is not like [ of changing dramatically although the color of light looks pale a little ], when a headlight is seen, that a blue bulb appears slightly fulfills satisfaction.
View detail
PIAA extreme bulb H4 Forza MF-08 was equipped with 12V 60/55W 4700K. Although exchange is easy, it may be difficult if it does not get used. I think that what is necessary is just to approach a bulb so that a hand may look good. At the time of
PIAA extreme bulb H4 Forza MF-08 was equipped with 12V 60/55W 4700K.
Although exchange is easy, it may be difficult if it does not get used.
I think that what is necessary is just to approach a bulb so that a hand may look good.
At the time of exchange, cautions are required in not soiling so that the glass of a bulb may not be touched.
Like HID, it compares with a pale color and is a beauty.
It was impressed immediately after exchange.
Compared with a pure bulb, it completely illuminates perfect very brightly.
As illuminated by the powerful fluorescent light, it is natural and legible.
A run becomes pleasant at night.
HID is high -- just for a moment .
In the direction to say, I think that it is good one.
But by a bulb, it is the more nearly big-ticket one.
View detail